Eduard Iten 69b8cb0b79 Rev 0.2: Major hardware improvements and production readiness ... Hardware Improvements (Thanks to shx for schematic cleanup): - Clean up schematic organization and structure - Set CAN transceiver Silent pin to GND for stability - Add status LEDs (yellow: 24V/5V/3.3V, green: MCU PB4) - Replace jumpers with solder jumpers on bottom side - Add jumpers to output PFETs for permanent-on without firmware - Add robust test points for 5V/GND load testing - Add optional heatsink for DC/DC converter on bottom - Add 10µF capacitor for MCU on 3.3V rail Component Optimizations: - Replace 30kΩ with 33kΩ basic part for simplified BOM - Change DC/DC feedback: 15.5kΩ15kΩ (new output: 5.1V) - Upgrade CAN ESD protection: NUP2105LPESD1CAN - Increase CAN termination resistor footprint: 04020603 - Switch USB hub supply from 5V to 3.3V per datasheet Production Ready: - Add all LCSC part numbers and rotations - Generate complete production data package - Improve PCB layout and button placement - Create comprehensive changelog documentation		2025-12-08 11:13:03 +01:00
..
EWS_-_Power_CANbus_and_USB_HAT_for_3D_Printers_0.1.zip	Rev 0.2: Major hardware improvements and production readiness	2025-12-08 11:13:03 +01:00
bom.csv	Rev 0.2: Major hardware improvements and production readiness	2025-12-08 11:13:03 +01:00
designators.csv	Rev 0.2: Major hardware improvements and production readiness	2025-12-08 11:13:03 +01:00
netlist.ipc	Rev 0.2: Major hardware improvements and production readiness	2025-12-08 11:13:03 +01:00
positions.csv	Rev 0.2: Major hardware improvements and production readiness	2025-12-08 11:13:03 +01:00