Rev 0.2: Major hardware improvements and production readiness

Hardware Improvements (Thanks to shx for schematic cleanup):
- Clean up schematic organization and structure
- Set CAN transceiver Silent pin to GND for stability
- Add status LEDs (yellow: 24V/5V/3.3V, green: MCU PB4)
- Replace jumpers with solder jumpers on bottom side
- Add jumpers to output PFETs for permanent-on without firmware
- Add robust test points for 5V/GND load testing
- Add optional heatsink for DC/DC converter on bottom
- Add 10µF capacitor for MCU on 3.3V rail

Component Optimizations:
- Replace 30kΩ with 33kΩ basic part for simplified BOM
- Change DC/DC feedback: 15.5kΩ15kΩ (new output: 5.1V)
- Upgrade CAN ESD protection: NUP2105LPESD1CAN
- Increase CAN termination resistor footprint: 04020603
- Switch USB hub supply from 5V to 3.3V per datasheet

Production Ready:
- Add all LCSC part numbers and rotations
- Generate complete production data package
- Improve PCB layout and button placement
- Create comprehensive changelog documentation

project.pretty/EduardIten.kicad_mod

@@ -54,6 +54,17 @@
 			)
 		)
 	)
+	(fp_rect
+		(start -8.4 -0.8)
+		(end 12.5 0.6)
+		(stroke
+			(width 0.05)
+			(type default)
+		)
+		(fill no)
+		(layer "F.CrtYd")
+		(uuid "d038621d-8f2e-4891-9375-4ca820e1be14")
+	)
 	(fp_text user "created by"
 		(at -0.508 0 0)
 		(unlocked yes)
@@ -228,5 +239,9 @@
 			)
 		)
 	)
+	(group ""
+		(uuid "52c1fae9-7d9c-4912-8f2f-e2f7934ba30e")
+		(members "30805e3d-a6bd-47e9-ac44-987700ea2ea7" "d038621d-8f2e-4891-9375-4ca820e1be14")
+	)
 	(embedded_fonts no)
 )