# Available runners configured by board.cmake.
runners:
- pyocd
- jlink
- openocd

# Default flash runner if --runner is not given.
flash-runner: pyocd

# Default debug runner if --runner is not given.
debug-runner: pyocd

# Common runner configuration values.
config:
  board_dir: C:/Users/iteedi/zephyrproject/projects/EWS/firmware/canfd_cdc_composite/boards/arm/ews
  # Build outputs:
  elf_file: zephyr.elf
  hex_file: zephyr.hex
  bin_file: zephyr.bin
  # Host tools:
  gdb: C:/Users/iteedi/zephyr-sdk-0.17.4/arm-zephyr-eabi/bin/arm-zephyr-eabi-gdb.exe

# Runner specific arguments
args:
  pyocd:
    - --dt-flash=y
    - --target=stm32g0b1kbux
  jlink:
    - --dt-flash=y
    - --device=STM32G0B1KB
    - --speed=4000
  openocd:
    - --cmd-load
    - flash write_image erase
    - --cmd-verify
    - verify_image