sync

firmware/CMakeLists.txt

@@ -9,9 +9,12 @@ target_sources(app PRIVATE
     src/io.c
     src/audio.c
     src/usb.c
+    src/uart.c
     src/protocol.c
     src/utils.c
+    src/settings.c
 )
-zephyr_include_directories(src)
+
+zephyr_include_directories(include)
 
 

firmware/Tags.md

@@ -1,133 +1,122 @@
-# Audio-Tags Format
+# Edi's Buzzer - Metadata Tags Format
 
-Dieses Dokument beschreibt das aktuelle Tag-Format für Audiodateien.
+## Architektur-Übersicht
+Die Metadaten werden transparent an das Ende der rohen Audio-Daten angehängt. Das Format basiert auf einer strikten **Little-Endian** Byte-Reihenfolge und nutzt eine erweiterbare **TLV-Struktur** (Type-Length-Value) für die eigentlichen Datenblöcke.
 
-## 1) Position in der Datei
+Das physische Layout einer Datei im Flash-Speicher sieht wie folgt aus:
+`[Audio-Rohdaten] [TLV-Block 1] ... [TLV-Block N] [Footer (8 Bytes)]`
 
-Die Tags stehen am Dateiende:
+---
 
-`[audio_data][metadata][tag_version_u8][footer_len_le16]["TAG!"]`
+## 1. Footer-Struktur
+Der Footer liegt exakt auf den letzten 8 Bytes der Datei (EOF - 8). Er dient als Ankerpunkt für den Parser, um die Metadaten rückwärts aus der Datei zu extrahieren. Das 8-Byte-Alignment stellt speichersichere Casts auf 32-Bit-ARM-Architekturen sicher.
 
-- `audio_data`: eigentliche Audiodaten
+| Offset | Feld | Typ | Beschreibung |
-- `metadata`: Folge von Tag-Einträgen
+| :--- | :--- | :--- | :--- |
-- `tag_version_u8`: 1 Byte Versionsnummer des Tag-Formats
+| 0 | `total_size` | `uint16_t` | Gesamtgröße in Bytes (Summe aller TLV-Blöcke + 8 Bytes Footer). |
-- `footer_len_le16`: 2 Byte, Little Endian
+| 2 | `version` | `uint16_t` | Format-Version. Aktuell `0x0001`. |
-- `"TAG!"`: 4 Byte Magic (`0x54 0x41 0x47 0x21`)
+| 4 | `magic` | `char[4]` | Fixe Signatur: `"TAG!"` (Hex: `54 41 47 21`). |
 
-## 2) Bedeutung von `footer_len_le16`
+---
 
-`footer_len_le16` ist die **Gesamtlänge des Footers**, also:
+## 2. TLV-Header (Type-Length-Value)
+Jeder Metadaten-Block beginnt mit einem exakt 4 Bytes großen Header. Unbekannte Typen können vom Controller durch einen relativen Sprung (`fs_seek` um `length` Bytes) übersprungen werden.
 
-`footer_len = metadata_len + 1 + 2 + 4`
+| Offset | Feld | Typ | Beschreibung |
+| :--- | :--- | :--- | :--- |
+| 0 | `type` | `uint8_t` | Definiert den Inhalt des Blocks (siehe Typen-Definitionen). |
+| 1 | `index` | `uint8_t` | Erlaubt die Fragmentierung großer Datensätze (z.B. bei JSON > 64 KB). Standard: `0x00`. |
+| 2 | `length` | `uint16_t` | Größe der folgenden Payload in Bytes (ohne diesen Header). |
 
-Damit beginnt `metadata` bei:
+---
 
-`metadata_start = file_size - footer_len`
+## 3. Typen-Definitionen
 
-Das passt zur aktuellen Implementierung in der Firmware.
+### Type `0x00`: Binary System Metadata
+Dieser Typ gruppiert maschinenlesbare, binäre Systeminformationen. Die Unterscheidung erfolgt über das `Index`-Feld.
 
-### Tag-Version
+#### Index `0x00`: Audio Format
+Dieser Block konfiguriert den I2S-Treiber vor der Wiedergabe.
+* **Typ:** `0x00`
+* **Index:** `0x00`
+* **Länge:** `0x0008` (8 Bytes)
+* **Payload:** `[codec: 1 Byte] [bit_depth: 1 Byte] [reserved: 2 Bytes] [samplerate: 4 Bytes]`
 
-- `tag_version` ist aktuell `0x01`.
+#### Index `0x01`: Audio CRC32
-- Der Host darf nur bekannte Versionen interpretieren.
+Speichert die CRC32-Prüfsumme (IEEE) der reinen Audiodaten (vom Dateianfang bis zum Beginn des ersten TLV-Blocks). Dient Synchronisations-Tools für einen schnellen Integritäts- und Abgleich-Check, ohne die gesamte Datei neu hashen zu müssen.
-- Bei unbekannter Version: Tag-Block ignorieren oder als "nicht unterstützt" melden.
+* **Typ:** `0x00`
+* **Index:** `0x01`
+* **Länge:** `0x0004` (4 Bytes)
+* **Payload:** `uint32_t` (Little-Endian)
 
-## 3) Endianness und Typen
+### Type `0x10`: JSON Metadata
+Dieser Block enthält Metadaten, die primär für das Host-System (z. B. das Python-Tool) zur Verwaltung, Kategorisierung und Anzeige bestimmt sind. Der Mikrocontroller ignoriert und überspringt diesen Block während der Audiowiedergabe.
 
-- Alle Multi-Byte-Werte sind **Little Endian**.
+* **Typ:** `0x10`
-- Tag-Einträge sind TLV-basiert:
+* **Länge:** Variabel
-  - `type`: `uint8_t`
+* **Payload:** UTF-8-kodierter JSON-String (ohne Null-Terminator).
-  - `len`: `uint16_t`
-  - `value`: `byte[len]`
 
-Dadurch können auch unbekannte Typen sauber übersprungen werden.
+#### Standardisierte JSON-Schlüssel
+Die nachfolgenden Schlüssel (Keys) sind im Basis-Standard definiert. Die Integration weiterer, proprietärer Schlüssel ist technisch möglich. Es wird jedoch empfohlen, dies mit Vorsicht zu handhaben, da zukünftige Standardisierungen diese Schlüsselnamen belegen könnten (Namenskollision).
 
-## 4) Unterstützte Tag-Typen
+| Schlüssel | Datentyp | Beschreibung |
+| :--- | :--- | :--- |
+| `t` | String | Titel der Audiodatei |
+| `a` | String | Autor oder Ersteller |
+| `r` | String | Bemerkungen (Remarks) oder Beschreibung |
+| `c` | Array of Strings | Kategorien zur Gruppierung |
+| `dc` | String | Erstellungsdatum (Date Created), idealerweise nach ISO 8601 |
+| `ds` | String | Speicher- oder Änderungsdatum (Date Saved), idealerweise nach ISO 8601 |
 
-Aktuell definierte Typen:
+**Beispiel-Payload:**
+Ein vollständiger JSON-Datensatz gemäß dieser Spezifikation hat folgendes Format:
 
-- `0x00`: `DESCRIPTION` (Beschreibung des Samples)
+```json
-- `0x01`: `AUTHOR`
+{
-- `0x10`: `CRC32_RAW`
+  "t": "Testaufnahme System A",
-- `0x20`: `FILE_FORMAT` (Info für Host, Player wertet derzeit nicht aus)
+  "a": "Entwickler-Team",
+  "r": "Überprüfung der Mikrofon-Aussteuerung.",
+  "c": ["Test", "Audio", "V1"],
+  "dc": "2026-03-05T13:00:00Z",
+  "ds": "2026-03-05T13:10:00Z"
+}
+```
 
-## 5) Value-Format pro Tag
+*(Hinweis zur Skalierbarkeit: Für zukünftige Erweiterungen können dedizierte TLV-Typen definiert werden, wie beispielsweise 0x11 für GZIP-komprimierte JSON-Daten oder 0x20 für binäre Bilddaten wie PNG-Cover).*
 
-### 5.1 `0x00` DESCRIPTION
+---
 
-- `value`: UTF-8-Text
+## 4. Lese-Algorithmus (Parser-Logik)
-- `len`: Anzahl Bytes des UTF-8-Texts
 
-### 5.2 `0x01` AUTHOR
+Der Controller extrahiert die Hardware-Parameter nach folgendem Ablauf:
 
-- `value`: UTF-8-Text
+1. **Footer lokalisieren:** * Gehe zu `EOF - 8`. Lese 8 Bytes in das `tag_footer_t` Struct.
-- `len`: Anzahl Bytes des UTF-8-Texts
+   * Validiere `magic == "TAG!"` und `version == 0x0001` (unter Berücksichtigung von Little-Endian Konvertierung via `sys_le16_to_cpu`).
+2. **Grenzen berechnen:**
+   * Lese `total_size`. 
+   * Die reinen Audiodaten enden bei `audio_limit = EOF - total_size`.
+   * Gehe zur Position `audio_limit`.
+3. **TLV-Blöcke iterieren:**
+   * Solange die aktuelle Leseposition kleiner als `EOF - 8` ist:
+     * Lese 4 Bytes in den `tlv_header_t`.
+     * Wenn `type == 0x00`: Lese die nächsten 8 Bytes in das `tlv_audio_format_t` Struct.
+     * Wenn `type != 0x00`: Führe `fs_seek(header.length, FS_SEEK_CUR)` aus.
 
-### 5.3 `0x10` CRC32_RAW
+---
 
-- `value`: `uint32_t crc32` (4 Byte, Little Endian)
+## 5. Hex-Beispiel
-- `len`: **muss 4** sein
 
-### 5.4 `0x20` FILE_FORMAT
+Eine fiktive Datei enthält Audio-Daten. Es soll ein PCM-Mono Format (16 Bit, 16 kHz) sowie ein kurzes JSON `{"t":"A"}` (9 Bytes) angehängt werden.
 
-- `value`:
+**1. TLV 0x00 (Audio Format):**
-  - `bits_per_sample`: `uint8_t`
+* Header: `00 00 08 00` (Type 0, Index 0, Length 8)
-  - `sample_rate`: `uint32_t` (Little Endian)
+* Payload: `00 10 00 00 80 3E 00 00` (Mono, 16-Bit, Reserved, 16000 Hz)
-- `len`: **muss 5** sein
 
-Beispielwerte aktuell oft: `bits_per_sample = 16`, `sample_rate = 16000`.
+**2. TLV 0x10 (JSON):**
+* Header: `10 00 09 00` (Type 16, Index 0, Length 9)
+* Payload: `7B 22 74 22 3A 22 41 22 7D` (`{"t":"A"}`)
 
-## 6) Vorkommen je Typ
+**3. Footer:**
-
+* Total Size: `2D 00` (45 Bytes = 12 Bytes Audio-TLV + 13 Bytes JSON-TLV + 12 Bytes Padding/Zusatz + 8 Bytes Footer) -> *Hinweis: Size ist in diesem Konstrukt abhängig vom genauen Payload.*
-Aktueller Stand: **jeder Tag-Typ darf maximal 1x vorkommen**.
+* Version: `01 00`
-
+* Magic: `54 41 47 21` (`TAG!`)
-Empfohlene Host-Regel:
-
-- Falls ein Typ mehrfach vorkommt, letzte Instanz gewinnt (`last-wins`) und ein Warnhinweis wird geloggt.
-
-## 7) Validierungsregeln (Host)
-
-Beim Lesen:
-
-1. Prüfen, ob Datei mindestens 7 Byte hat.
-2. Letzte 6 Byte prüfen: `footer_len_le16` + `TAG!`.
-3. `footer_len` gegen Dateigröße validieren (`6 <= footer_len <= file_size`).
-4. `tag_version` an Position `file_size - 6 - 1` lesen und validieren.
-5. Im Metadatenbereich TLV-Einträge lesen, bis Ende erreicht.
-6. Für bekannte Typen feste Längen prüfen (`CRC32_RAW=4`, `FILE_FORMAT=5`).
-7. Unbekannte Typen über `len` überspringen.
-
-Beim Schreiben:
-
-1. Vorhandene Tags entfernen/ersetzen (audio-Ende bestimmen).
-2. Neue TLV-Metadaten schreiben.
-3. `tag_version_u8` schreiben (`0x01`).
-4. `footer_len_le16` schreiben (inkl. 1+2+4).
-5. `TAG!` schreiben.
-5. Datei auf neue Länge truncaten.
-
-## 8) Beispiel (hex)
-
-Beispiel mit:
-
-- DESCRIPTION = "Kick"
-- AUTHOR = "Edi"
-- CRC32_RAW = `0x12345678`
-
-TLV-Daten:
-
-- `00 04 00 4B 69 63 6B`
-- `01 03 00 45 64 69`
-- `10 04 00 78 56 34 12`
-
-`metadata_len = 7 + 6 + 7 = 20 (0x0014)`
-
-`footer_len = 20 + 1 + 2 + 4 = 27 (0x001B)`
-
-Footer-Ende:
-
-- `01 1B 00 54 41 47 21`
-
-## 9) Hinweis zur aktuellen Firmware
-
-Die Firmware verarbeitet Tag-Payload direkt binär (Chunk-Streaming über das Protokoll). Das dateiinterne Format entspricht direkt diesem Dokument.

firmware/VERSION

@@ -1,6 +1,6 @@
 VERSION_MAJOR = 0
-VERSION_MINOR = 2
+VERSION_MINOR = 3
-PATCHLEVEL = 19
+PATCHLEVEL = 5
 VERSION_TWEAK = 0
 #if (IS_ENABLED(CONFIG_LOG))
 EXTRAVERSION = debug

firmware/include/fs.h

@@ -10,6 +10,37 @@ typedef struct slot_info_t {
     size_t size;
 } slot_info_t;
 
+typedef enum {
+        FS_MSG_START,
+        FS_MSG_CHUNK,
+        FS_MSG_EOF,
+        FS_MSG_ABORT
+} fs_msg_type_t;
+
+typedef struct {
+        fs_msg_type_t type;
+        
+        /* Die Union spart RAM, da Start- und Chunk-Parameter 
+           nie gleichzeitig im selben Message-Paket benötigt werden. */
+        union {
+                /* Payload für FS_MSG_START */
+                struct {
+                        /* Der String wird sicher in die Queue kopiert */
+                        char filename[MAX_PATH_LEN]; 
+                        uint32_t expected_size;
+                        uint32_t start_position;
+                } start;
+                
+                /* Payload für FS_MSG_CHUNK */
+                struct {
+                        void *slab_ptr;
+                        uint32_t chunk_size;
+                } chunk;
+        };
+} fs_msg_t;
+
+extern struct k_msgq fs_msgq;
+
 /**
  * @brief Initializes the filesystem by mounting it
  */
@@ -102,6 +133,21 @@ int fs_pm_mkdir(const char *path);
  */
 int fs_pm_rename(const char *old_path, const char *new_path);
 
+/**
+ * @brief Recursively creates directories for the given path, ensuring the flash is active during the operation
+ * @param path Path to the directory to create (can include multiple levels, e.g. "/dir1/dir2/dir3")
+ * @return 0 on success, negative error code on failure
+ */
+int fs_pm_mkdir_recursive(char *path);
+
+/**
+ * @brief Recursively removes a directory and all its contents, ensuring the flash is active during the operation
+ * @param path Path to the directory to remove
+ * @param max_len Maximum length of the path buffer
+ * @return 0 on success, negative error code on failure
+ */
+int fs_pm_rm_recursive(char *path, size_t max_len);
+
 /**
  * @brief Gets the length of the audio data in a file, accounting for any metadata tags
  * @param fp Pointer to an open fs_file_t structure representing the audio file
@@ -138,29 +184,15 @@ int fs_tag_open_read(struct fs_file_t *fp, uint8_t *version, size_t *payload_len
 ssize_t fs_tag_read_chunk(struct fs_file_t *fp, void *buffer, size_t len);
 
 /**
- * @brief Positions file pointer for tag payload overwrite at end of audio data.
+ * @brief Setzt die Synchronisation für einen neuen Dateitransfer zurück.
- * @param fp Pointer to an open fs_file_t structure representing the audio file
- * @return 0 on success, negative error code on failure
  */
-int fs_tag_open_write(struct fs_file_t *fp);
+void fs_reset_transfer_sync(void);
 
 /**
- * @brief Writes a raw tag payload chunk.
+ * @brief Blockiert den aufrufenden Thread, bis der FS-Thread den Transfer
- * @param fp Pointer to an open fs_file_t positioned for tag payload write
+ * (EOF oder ABORT) vollständig auf dem Flash abgeschlossen hat.
- * @param buffer Source buffer
- * @param len Number of bytes to write
- * @return Number of bytes written, negative error code on failure
  */
-ssize_t fs_tag_write_chunk(struct fs_file_t *fp, const void *buffer, size_t len);
+void fs_wait_for_transfer_complete(void);
-
-/**
- * @brief Finalizes tags by appending version + footer and truncating file.
- * @param fp Pointer to an open fs_file_t structure representing the audio file
- * @param version Tag format version to write
- * @param payload_len Tag payload length in bytes
- * @return 0 on success, negative error code on failure
- */
-int fs_tag_finish_write(struct fs_file_t *fp, uint8_t version, size_t payload_len);
 
 /**
  * @brief Retrieves information about the firmware slot, such as start address and size

firmware/include/protocol.h

@@ -30,6 +30,14 @@ typedef enum {
     CMD_PUT_FILE = 0x20,
     CMD_PUT_FW = 0x21,
     CMD_GET_FILE = 0x22,
+    CMD_PUT_TAGS = 0x24,
+    CMD_GET_TAGS = 0x25,
+
+    CMD_PLAY = 0x30,
+    CMD_STOP = 0x31,
+
+    CMD_SET_SETTING = 0x40,
+    CMD_GET_SETTING = 0x41,
 } protocol_cmd_t;
 
 typedef enum {

firmware/include/settings.h

@@ -0,0 +1,28 @@
+#ifndef BUZZER_SETTINGS_H
+#define BUZZER_SETTINGS_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/* Struktur für den direkten Lesezugriff aus dem RAM (Zero-Latency) */
+typedef struct {
+    uint8_t audio_vol;             /* 0..100 */
+    bool play_norepeat;            /* true = 1, false = 0 */
+    uint32_t storage_interval_s;   /* 0..7200 Sekunden */
+} app_settings_t;
+
+/* Globale Instanz für den direkten Lesezugriff */
+extern app_settings_t app_settings;
+
+/* Initialisiert das Settings-Subsystem, NVS und lädt die gespeicherten Werte */
+int app_settings_init(void);
+
+/* Setter: Aktualisieren den RAM-Wert und starten/verlängern den Speichern-Timer */
+void app_settings_set_audio_vol(uint8_t vol);
+void app_settings_set_play_norepeat(bool norepeat);
+void app_settings_set_storage_interval(uint32_t interval_s);
+
+/* Forciert sofortiges Speichern aller anstehenden Werte (Aufruf z.B. vor CMD_REBOOT) */
+void app_settings_save_pending_now(void);
+
+#endif /* BUZZER_SETTINGS_H */

firmware/include/uart.h

@@ -0,0 +1,8 @@
+#ifndef _UART_H_
+#define _UART_H_
+
+int uart_init(void);
+int uart_write(const uint8_t *data, size_t len, k_timeout_t timeout);
+int uart_write_string(const char *str, k_timeout_t timeout);
+int uart_read(uint8_t *buffer, size_t max_len, k_timeout_t timeout);
+#endif /* _UART_H_ */

firmware/include/usb.h

@@ -0,0 +1,8 @@
+#ifndef USB_H_
+#define USB_H_
+
+int usb_init(void);
+void usb_wait_for_dtr(void);
+bool usb_dtr_active(void);
+
+#endif /* USB_H_ */

firmware/pm_static.yml

@@ -3,7 +3,7 @@ mcuboot:
   size: 0xC000
   region: flash_primary
 
-# Primary Slot: Start bleibt 0xC000, Größe jetzt 200KB (0x32000)
+# Primary Slot: Start bleibt 0xC000, Größe 200KB (0x32000)
 mcuboot_primary:
   address: 0xC000
   size: 0x32000
@@ -26,7 +26,13 @@ mcuboot_secondary:
   size: 0x32000
   region: flash_primary
 
-# External Flash bleibt unverändert
+# NVS storage am Ende des Flashs, 16KB (0x4000)
+settings_storage:
+  address: 0xFC000
+  size: 0x4000
+  region: flash_primary
+
+# External Flash
 littlefs_storage:
   address: 0x0
   size: 0x800000

firmware/prj.conf

@@ -1,7 +1,7 @@
 # --- GPIO & Logging ---
 CONFIG_GPIO=y
 CONFIG_LOG=y
-CONFIG_POLL=y
+CONFIG_POLL=n
 
 # --- Power Management (Fix für HAS_PM & Policy) ---
 # CONFIG_PM=y
@@ -13,24 +13,25 @@ CONFIG_FLASH_MAP=y
 CONFIG_FILE_SYSTEM=y
 CONFIG_FILE_SYSTEM_LITTLEFS=y
 CONFIG_FILE_SYSTEM_MKFS=y
-CONFIG_FS_LITTLEFS_READ_SIZE=64
+CONFIG_FS_LITTLEFS_READ_SIZE=256
 CONFIG_FS_LITTLEFS_PROG_SIZE=256
-CONFIG_FS_LITTLEFS_CACHE_SIZE=512
+CONFIG_FS_LITTLEFS_CACHE_SIZE=4096
-CONFIG_FS_LITTLEFS_LOOKAHEAD_SIZE=128
+CONFIG_FS_LITTLEFS_LOOKAHEAD_SIZE=256
 CONFIG_FS_LITTLEFS_BLOCK_CYCLES=512
 CONFIG_MAIN_STACK_SIZE=2048
 
+# --- NVS & Settings (für die Speicherung von Konfigurationen) ---
+CONFIG_NVS=y
+CONFIG_SETTINGS=y
+CONFIG_SETTINGS_NVS=y
+
 # --- USB Device & CDC ACM ---
-CONFIG_USB_DEVICE_STACK=y
+CONFIG_USB_DEVICE_STACK_NEXT=y
-CONFIG_DEPRECATION_TEST=y
+CONFIG_USBD_CDC_ACM_CLASS=y
-CONFIG_USB_DEVICE_MANUFACTURER="Eduard Iten"
+CONFIG_CDC_ACM_SERIAL_INITIALIZE_AT_BOOT=n
-CONFIG_USB_DEVICE_PRODUCT="Edis Buzzer"
+CONFIG_USBD_LOG_LEVEL_ERR=y
-CONFIG_USB_DEVICE_PID=0x0001
+CONFIG_UDC_DRIVER_LOG_LEVEL_ERR=y
-CONFIG_USB_DRIVER_LOG_LEVEL_ERR=y
+CONFIG_USBD_CDC_ACM_LOG_LEVEL_OFF=y
-CONFIG_USB_DEVICE_LOG_LEVEL_ERR=y
-CONFIG_USB_DEVICE_LOG_LEVEL_OFF=y
-CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=n
-CONFIG_USB_DEVICE_STACK_NEXT=n
 
 # --- UART (für USB-CDC) ---
 CONFIG_SERIAL=y

firmware/src/audio.c

@@ -9,6 +9,7 @@
 #include <audio.h>
 #include <fs.h>
 #include <io.h>
+#include <settings.h>
 
 #define AUDIO_THREAD_STACK_SIZE 2048
 #define AUDIO_THREAD_PRIORITY 5
@@ -47,7 +48,6 @@ K_SEM_DEFINE(audio_ready_sem, 0, 1);
 static const struct device *const i2s_dev = DEVICE_DT_GET(I2S_NODE);
 static const struct gpio_dt_spec amp_en_dev = GPIO_DT_SPEC_GET(AUDIO_AMP_ENABLE_NODE, gpios);
 
-static volatile int current_volume = 8;
 static volatile bool abort_playback = false;
 static char next_random_filename[64] = {0};
 
@@ -57,6 +57,8 @@ static char cached_404_path[] = "/lfs/sys/404";
 static struct k_mutex i2s_lock;
 static struct k_work audio_stop_work;
 
+static uint32_t last_played_index = 0xFFFFFFFF;
+
 static void audio_stop_work_handler(struct k_work *work)
 {
     ARG_UNUSED(work);
@@ -89,6 +91,52 @@ void i2s_resume(void)
     k_mutex_unlock(&i2s_lock);
 }
 
+int get_random_file(char *out_filename, size_t max_len)
+{
+    if (audio_file_count == 0)
+    {
+        /* Fallback auf System-Sound, wenn Ordner leer */
+        strncpy(out_filename, cached_404_path, max_len);
+        return 0;
+    }
+
+    uint32_t target_index;
+    
+    /* Random-Index generieren mit optionalem No-Repeat-Schutz */
+    if (app_settings.play_norepeat && audio_file_count > 1) {
+        do {
+            target_index = k_cycle_get_32() % audio_file_count;
+        } while (target_index == last_played_index);
+    } else {
+        target_index = k_cycle_get_32() % audio_file_count;
+    }
+    
+    last_played_index = target_index;
+
+    struct fs_dir_t dirp;
+    struct fs_dirent entry;
+    uint32_t current_index = 0;
+
+    fs_dir_t_init(&dirp);
+    if (fs_pm_opendir(&dirp, AUDIO_PATH) < 0)
+        return -ENOENT;
+
+    while (fs_readdir(&dirp, &entry) == 0 && entry.name[0] != '\0')
+    {
+        if (entry.type == FS_DIR_ENTRY_FILE)
+        {
+            if (current_index == target_index)
+            {
+                snprintf(out_filename, max_len, "%s/%s", AUDIO_PATH, entry.name);
+                break;
+            }
+            current_index++;
+        }
+    }
+    fs_pm_closedir(&dirp);
+    return 0;
+}
+
 void audio_refresh_file_count(void)
 {
     static struct fs_dir_t dirp;
@@ -112,6 +160,7 @@ void audio_refresh_file_count(void)
     fs_pm_closedir(&dirp);
     audio_file_count = count;
     LOG_INF("Audio cache refreshed: %u files found in %s", count, AUDIO_PATH);
+    get_random_file(next_random_filename, sizeof(next_random_filename));
 }
 
 static void wait_for_i2s_drain(void)
@@ -130,40 +179,6 @@ static void wait_for_i2s_drain(void)
     }
 }
 
-int get_random_file(char *out_filename, size_t max_len)
-{
-    if (audio_file_count == 0)
-    {
-        /* Fallback auf System-Sound, wenn Ordner leer */
-        strncpy(out_filename, cached_404_path, max_len);
-        return 0;
-    }
-
-    struct fs_dir_t dirp;
-    struct fs_dirent entry;
-    uint32_t target_index = k_cycle_get_32() % audio_file_count;
-    uint32_t current_index = 0;
-
-    fs_dir_t_init(&dirp);
-    if (fs_pm_opendir(&dirp, AUDIO_PATH) < 0)
-        return -ENOENT;
-
-    while (fs_readdir(&dirp, &entry) == 0 && entry.name[0] != '\0')
-    {
-        if (entry.type == FS_DIR_ENTRY_FILE)
-        {
-            if (current_index == target_index)
-            {
-                snprintf(out_filename, max_len, "%s/%s", AUDIO_PATH, entry.name);
-                break;
-            }
-            current_index++;
-        }
-    }
-    fs_pm_closedir(&dirp);
-    return 0;
-}
-
 void audio_system_ready(void)
 {
     k_sem_give(&audio_ready_sem);
@@ -250,8 +265,8 @@ void audio_thread(void *arg1, void *arg2, void *arg3)
 
             bool trigger_started = false;
             int queued_blocks = 0;
-            uint8_t factor = MIN(255, current_volume * 0xFF / 100);
+            uint8_t factor = MIN(255, app_settings.audio_vol * 0xFF / 100);
-            LOG_INF("Volume factor: %u (for volume %d%%)", factor, current_volume);
+            LOG_INF("Volume factor: %u (for volume %d%%)", factor, app_settings.audio_vol);
 
             while (!abort_playback)
             {

firmware/src/fs.c

@@ -1,4 +1,5 @@
 #include <zephyr/fs/littlefs.h>
+#include <zephyr/sys/byteorder.h>
 #include <zephyr/drivers/flash.h>
 #include <zephyr/storage/flash_map.h>
 #include <zephyr/dfu/flash_img.h>
@@ -9,18 +10,23 @@
 
 LOG_MODULE_REGISTER(buzz_fs, LOG_LEVEL_INF);
 
+#define FS_THREAD_STACK_SIZE 2048
+#define FS_THREAD_PRIORITY 6
+
+#define FS_MSGQ_MAX_ITEMS 4
+#define FS_SLAB_BUF_SIZE 4096
+#define TAG_FORMAT_VERSION 0x0001
 #define TAG_MAGIC "TAG!"
-#define TAG_MAGIC_LEN 4U
-#define TAG_LEN_FIELD_LEN 2U
-#define TAG_VERSION_LEN 1U
-#define TAG_FOOTER_V1_LEN (TAG_VERSION_LEN + TAG_LEN_FIELD_LEN + TAG_MAGIC_LEN)
-#define TAG_FORMAT_VERSION 0x01
 
 #define STORAGE_PARTITION_ID FIXED_PARTITION_ID(littlefs_storage)
 #define SLOT1_ID FIXED_PARTITION_ID(slot1_partition)
 
 FS_LITTLEFS_DECLARE_DEFAULT_CONFIG(fs_storage_data);
 
+K_MEM_SLAB_DEFINE(file_buffer_slab, FS_SLAB_BUF_SIZE, FS_MSGQ_MAX_ITEMS, 4);
+K_MSGQ_DEFINE(fs_msgq, sizeof(fs_msg_t), FS_MSGQ_MAX_ITEMS, 4);
+K_SEM_DEFINE(fs_transfer_done_sem, 0, 1);
+
 #define QSPI_FLASH_NODE DT_ALIAS(qspi_flash)
 #if !DT_NODE_EXISTS(QSPI_FLASH_NODE)
 #error "QSPI Flash alias not defined in devicetree"
@@ -33,6 +39,8 @@ static struct k_mutex flash_pm_lock;
 static struct slot_info_t slot1_info;
 static struct flash_img_context flash_ctx;
 
+extern struct k_mem_slab file_buffer_slab;
+
 static struct fs_mount_t fs_storage_mnt = {
     .type = FS_LITTLEFS,
     .fs_data = &fs_storage_data,
@@ -40,6 +48,17 @@ static struct fs_mount_t fs_storage_mnt = {
     .mnt_point = "/lfs",
 };
 
+typedef enum {
+    FS_STATE_IDLE,
+    FS_STATE_RECEIVING
+} fs_thread_state_t;
+
+typedef struct __attribute__((packed)) {
+    uint16_t total_size;
+    uint16_t version;
+    uint8_t  magic[4];
+} tag_footer_t;
+
 int fs_init(void) {
     int rc = fs_mount(&fs_storage_mnt);
     if (rc < 0) {
@@ -121,10 +140,7 @@ int fs_pm_close(struct fs_file_t *file)
 {
     LOG_DBG("PM Closing file");
     int rc = fs_close(file);
-    if (rc == 0)
+    fs_pm_flash_suspend();
-    {
-        fs_pm_flash_suspend();
-    }
     return rc;
 }
 
@@ -144,10 +160,7 @@ int fs_pm_closedir(struct fs_dir_t *dirp)
 {
     LOG_DBG("PM Closing directory");
     int rc = fs_closedir(dirp);
-    if (rc == 0)
+    fs_pm_flash_suspend();
-    {
-        fs_pm_flash_suspend();
-    }
     return rc;
 }
 
@@ -196,11 +209,159 @@ int fs_pm_rename(const char *old_path, const char *new_path)
     return rc;
 }
 
+int fs_pm_rm_recursive(char *path_buf, size_t max_len)
+{
+    struct fs_dirent entry;
+    struct fs_dir_t dir;
+    int rc;
+
+    fs_pm_flash_resume();
+
+    /* 1. Stat prüfen: Ist es eine Datei? */
+    rc = fs_stat(path_buf, &entry);
+    if (rc != 0) {
+        fs_pm_flash_suspend();
+        return rc;
+    }
+
+    /* Wenn es eine Datei ist, direkt löschen und beenden */
+    if (entry.type == FS_DIR_ENTRY_FILE) {
+        rc = fs_unlink(path_buf);
+        fs_pm_flash_suspend();
+        return rc;
+    }
+
+    /* 2. Es ist ein Verzeichnis. Schleife bis es leer ist. */
+    size_t orig_len = strlen(path_buf);
+
+    while (1) {
+        fs_dir_t_init(&dir);
+        rc = fs_opendir(&dir, path_buf);
+        if (rc != 0) {
+            break;
+        }
+
+        bool found_something = false;
+
+        /* Genau EINEN löschbaren Eintrag suchen */
+        while (1) {
+            rc = fs_readdir(&dir, &entry);
+            if (rc != 0 || entry.name[0] == '\0') {
+                break; /* Ende oder Fehler */
+            }
+            if (strcmp(entry.name, ".") == 0 || strcmp(entry.name, "..") == 0) {
+                continue; /* Ignorieren */
+            }
+            
+            found_something = true;
+            break; /* Treffer! Schleife abbrechen. */
+        }
+
+        /* WICHTIG: Das Verzeichnis SOFORT schließen, BEVOR wir rekurieren! 
+         * Damit geben wir das File-Handle (NUM_DIRS) an Zephyr zurück. */
+        fs_closedir(&dir);
+
+        if (!found_something || rc != 0) {
+            break; /* Verzeichnis ist nun restlos leer */
+        }
+
+        size_t name_len = strlen(entry.name);
+        if (orig_len + 1 + name_len >= max_len) {
+            rc = -ENAMETOOLONG;
+            break;
+        }
+
+        /* Pfad für das gefundene Kindelement bauen */
+        path_buf[orig_len] = '/';
+        strcpy(&path_buf[orig_len + 1], entry.name);
+
+        /* Rekursiver Aufruf für das Kind */
+        rc = fs_pm_rm_recursive(path_buf, max_len);
+        
+        /* Puffer sofort wieder auf unser Verzeichnis zurückschneiden */
+        path_buf[orig_len] = '\0';
+
+        if (rc != 0) {
+            break; /* Abbruch, falls beim Löschen des Kindes ein Fehler auftrat */
+        }
+    }
+
+    /* 3. Das nun restlos leere Verzeichnis selbst löschen */
+    if (rc == 0) {
+        rc = fs_unlink(path_buf);
+    }
+
+    fs_pm_flash_suspend();
+    return rc;
+}
+
+int fs_pm_mkdir_recursive(char *path)
+{
+    int rc = 0;
+    struct fs_dirent entry;
+    char *p = path;
+
+    /* Führenden Slash überspringen, falls vorhanden (z. B. bei "/lfs") */
+    if (*p == '/') {
+        p++;
+    }
+
+    /* Flash für den gesamten Durchlauf aktivieren */
+    fs_pm_flash_resume();
+
+    while (*p != '\0') {
+        if (*p == '/') {
+            *p = '\0'; /* String temporär am aktuellen Slash terminieren */
+
+            /* Prüfen, ob dieser Pfadabschnitt bereits existiert */
+            rc = fs_stat(path, &entry);
+            
+            if (rc == -ENOENT) {
+                /* Existiert nicht -> anlegen */
+                rc = fs_mkdir(path);
+                if (rc != 0) {
+                    *p = '/'; /* Bei Fehler Slash wiederherstellen und abbrechen */
+                    break;
+                }
+            } else if (rc == 0) {
+                /* Existiert -> prüfen, ob es ein Verzeichnis ist */
+                if (entry.type != FS_DIR_ENTRY_DIR) {
+                    rc = -ENOTDIR;
+                    *p = '/';
+                    break;
+                }
+            } else {
+                /* Anderer Dateisystemfehler */
+                *p = '/';
+                break;
+            }
+
+            *p = '/'; /* Slash für den nächsten Schleifendurchlauf wiederherstellen */
+        }
+        p++;
+    }
+
+    /* Letztes Element verarbeiten, falls der Pfad nicht mit '/' endet */
+    if (rc == 0 && p > path && *(p - 1) != '/') {
+        rc = fs_stat(path, &entry);
+        if (rc == -ENOENT) {
+            rc = fs_mkdir(path);
+        } else if (rc == 0) {
+            if (entry.type != FS_DIR_ENTRY_DIR) {
+                rc = -ENOTDIR;
+            }
+        }
+    }
+
+    /* Flash am Ende wieder in den Suspend schicken */
+    fs_pm_flash_suspend();
+    return rc;
+}
+
 static int fs_get_tag_bounds(struct fs_file_t *fp, off_t file_size,
                              size_t *audio_limit, size_t *payload_len, bool *has_tag)
 {
-    uint8_t footer[6];
+    tag_footer_t footer;
-    uint16_t tag_len;
 
     if (audio_limit == NULL || payload_len == NULL || has_tag == NULL) {
         return -EINVAL;
@@ -210,42 +371,41 @@ static int fs_get_tag_bounds(struct fs_file_t *fp, off_t file_size,
     *audio_limit = (size_t)file_size;
     *payload_len = 0U;
 
-    if (file_size < (off_t)TAG_FOOTER_V1_LEN) {
+    if (file_size < (off_t)sizeof(tag_footer_t)) {
         return 0;
     }
 
-    fs_seek(fp, -(off_t)(TAG_LEN_FIELD_LEN + TAG_MAGIC_LEN), FS_SEEK_END);
+    /* Den 8-Byte-Footer direkt in das Struct einlesen */
-    if (fs_read(fp, footer, sizeof(footer)) != sizeof(footer)) {
+    fs_seek(fp, -(off_t)sizeof(tag_footer_t), FS_SEEK_END);
+    if (fs_read(fp, &footer, sizeof(tag_footer_t)) != sizeof(tag_footer_t)) {
         fs_seek(fp, 0, FS_SEEK_SET);
         return -EIO;
     }
 
-    if (memcmp(&footer[2], TAG_MAGIC, TAG_MAGIC_LEN) != 0) {
+    /* 1. Signatur prüfen */
+    if (memcmp(footer.magic, TAG_MAGIC, 4) != 0) {
         fs_seek(fp, 0, FS_SEEK_SET);
         return 0;
     }
 
-    tag_len = (uint16_t)footer[0] | ((uint16_t)footer[1] << 8);
+    /* 2. Endianness konvertieren */
-    if (tag_len > (uint16_t)file_size || tag_len < TAG_FOOTER_V1_LEN) {
+    uint16_t tag_version = sys_le16_to_cpu(footer.version);
-        fs_seek(fp, 0, FS_SEEK_SET);
+    uint16_t tag_len = sys_le16_to_cpu(footer.total_size);
-        return -EBADMSG;
-    }
-
-    uint8_t tag_version = 0;
-    fs_seek(fp, -(off_t)TAG_FOOTER_V1_LEN, FS_SEEK_END);
-    if (fs_read(fp, &tag_version, 1) != 1) {
-        fs_seek(fp, 0, FS_SEEK_SET);
-        return -EIO;
-    }
 
+    /* 3. Version und Größe validieren */
     if (tag_version != TAG_FORMAT_VERSION) {
         fs_seek(fp, 0, FS_SEEK_SET);
         return -ENOTSUP;
     }
 
+    if (tag_len > (uint16_t)file_size || tag_len < sizeof(tag_footer_t)) {
+        fs_seek(fp, 0, FS_SEEK_SET);
+        return -EBADMSG;
+    }
+
     *has_tag = true;
     *audio_limit = (size_t)file_size - tag_len;
-    *payload_len = tag_len - TAG_FOOTER_V1_LEN;
+    *payload_len = tag_len - sizeof(tag_footer_t);
 
     fs_seek(fp, 0, FS_SEEK_SET);
     return 0;
@@ -321,51 +481,6 @@ ssize_t fs_tag_read_chunk(struct fs_file_t *fp, void *buffer, size_t len)
     return fs_read(fp, buffer, len);
 }
 
-int fs_tag_open_write(struct fs_file_t *fp)
-{
-    ssize_t audio_limit = fs_get_audio_data_len(fp);
-    if (audio_limit < 0) {
-        return (int)audio_limit;
-    }
-    fs_seek(fp, audio_limit, FS_SEEK_SET);
-    return 0;
-}
-
-ssize_t fs_tag_write_chunk(struct fs_file_t *fp, const void *buffer, size_t len)
-{
-    return fs_write(fp, buffer, len);
-}
-
-int fs_tag_finish_write(struct fs_file_t *fp, uint8_t version, size_t payload_len)
-{
-    if (version != TAG_FORMAT_VERSION) {
-        return -ENOTSUP;
-    }
-
-    size_t total_footer_len = payload_len + TAG_FOOTER_V1_LEN;
-    if (total_footer_len > UINT16_MAX) {
-        return -EFBIG;
-    }
-
-    if (fs_write(fp, &version, 1) != 1) {
-        return -EIO;
-    }
-
-    uint8_t len_bytes[2];
-    len_bytes[0] = (uint8_t)(total_footer_len & 0xFFU);
-    len_bytes[1] = (uint8_t)((total_footer_len >> 8) & 0xFFU);
-    if (fs_write(fp, len_bytes, sizeof(len_bytes)) != sizeof(len_bytes)) {
-        return -EIO;
-    }
-
-    if (fs_write(fp, TAG_MAGIC, TAG_MAGIC_LEN) != TAG_MAGIC_LEN) {
-        return -EIO;
-    }
-
-    off_t current_pos = fs_tell(fp);
-    return fs_truncate(fp, current_pos);
-}
-
 int flash_get_slot_info(slot_info_t *info) {
     if (slot1_info.size != 0) {
         *info = slot1_info;
@@ -493,3 +608,112 @@ size_t fs_get_internal_flash_page_size(void) {
 
     return info.size;
 }
+
+void fs_reset_transfer_sync(void)
+{
+    k_sem_reset(&fs_transfer_done_sem);
+}
+
+void fs_wait_for_transfer_complete(void)
+{
+    k_sem_take(&fs_transfer_done_sem, K_FOREVER);
+}
+
+static void fs_thread_entry(void *p1, void *p2, void *p3)
+{
+    ARG_UNUSED(p1);
+    ARG_UNUSED(p2);
+    ARG_UNUSED(p3);
+
+    LOG_INF("Filesystem thread started");
+    fs_thread_state_t state = FS_STATE_IDLE;
+    fs_msg_t msg;
+    struct fs_file_t current_file;
+    fs_file_t_init(&current_file);
+    char current_filename[MAX_PATH_LEN] = {0};
+
+    while (1)
+    {
+        k_timeout_t wait_time = (state == FS_STATE_IDLE) ? K_FOREVER : K_SECONDS(1);
+        int rc = k_msgq_get(&fs_msgq, &msg, wait_time);
+
+        if (rc == -EAGAIN)
+        {
+            if (state == FS_STATE_RECEIVING)
+            {
+                LOG_WRN("FS Transfer Timeout. Aborting and dropping file.");
+                fs_pm_close(&current_file);
+                fs_pm_unlink(current_filename);
+                state = FS_STATE_IDLE;
+                k_sem_give(&fs_transfer_done_sem);
+            }
+            continue;
+        }
+
+        switch (state)
+        {
+        case FS_STATE_IDLE:
+            if (msg.type == FS_MSG_START)
+            {
+                strncpy(current_filename, msg.start.filename, MAX_PATH_LEN - 1);
+                current_filename[MAX_PATH_LEN - 1] = '\0';
+                
+                /* Bei Position 0 (Neuer Datei-Upload) die alte Datei restlos löschen */
+                if (msg.start.start_position == 0) {
+                    fs_pm_unlink(current_filename);
+                }
+
+                rc = fs_pm_open(&current_file, current_filename, FS_O_CREATE | FS_O_WRITE);
+                if (rc == 0) {
+                    if (msg.start.start_position > 0) {
+                        fs_seek(&current_file, msg.start.start_position, FS_SEEK_SET);
+                    }
+                    state = FS_STATE_RECEIVING;
+                } else {
+                    LOG_ERR("Failed to open %s: %d", current_filename, rc);
+                }
+            }
+            else if (msg.type == FS_MSG_CHUNK)
+            {
+                /* Chunks im IDLE-Status (z.B. nach Fehler) direkt verwerfen */
+                if (msg.chunk.slab_ptr != NULL)
+                {
+                    k_mem_slab_free(&file_buffer_slab, msg.chunk.slab_ptr);
+                }
+            }
+            else if (msg.type == FS_MSG_EOF || msg.type == FS_MSG_ABORT)
+            {
+                /* Verhindert Deadlocks, falls das Öffnen fehlgeschlagen war */
+                k_sem_give(&fs_transfer_done_sem);
+            }
+            break;
+
+        case FS_STATE_RECEIVING:
+            if (msg.type == FS_MSG_CHUNK)
+            {
+                if (msg.chunk.slab_ptr != NULL)
+                {
+                    fs_write(&current_file, msg.chunk.slab_ptr, msg.chunk.chunk_size);
+                    k_mem_slab_free(&file_buffer_slab, msg.chunk.slab_ptr);
+                }
+            }
+            else if (msg.type == FS_MSG_EOF)
+            {
+                fs_pm_close(&current_file);
+                state = FS_STATE_IDLE;
+                k_sem_give(&fs_transfer_done_sem);
+            }
+            else if (msg.type == FS_MSG_ABORT)
+            {
+                fs_pm_close(&current_file);
+                fs_pm_unlink(current_filename);
+                state = FS_STATE_IDLE;
+                k_sem_give(&fs_transfer_done_sem);
+            }
+            break;
+        }
+    }
+}
+
+K_THREAD_DEFINE(fs, FS_THREAD_STACK_SIZE, fs_thread_entry, 
+                NULL, NULL, NULL, FS_THREAD_PRIORITY, 0, 0);

firmware/src/main.c

@@ -15,6 +15,8 @@
 #include <io.h>
 #include <usb.h>
 #include <utils.h>
+#include <uart.h>
+#include <settings.h>
 
 LOG_MODULE_REGISTER(main, LOG_LEVEL_INF);
 
@@ -38,6 +40,13 @@ int main(void)
 
         int rc;
 
+        rc = app_settings_init();
+        if (rc < 0)
+        {
+                LOG_ERR("Settings initialization failed: %d", rc);
+                return rc;
+        }
+
         rc = fs_init();
         if (rc < 0)
         {
@@ -52,13 +61,21 @@ int main(void)
                 return rc;
         }
 
-        rc = usb_cdc_acm_init();
+        rc = usb_init();
         if (rc < 0)
         {
                 LOG_ERR("USB initialization failed: %d", rc);
                 return rc;
         }
 
+        rc = uart_init();
+        if (rc < 0)
+        {
+                LOG_ERR("UART initialization failed: %d", rc);
+                return rc;
+        }
+
+
         rc = io_init();
         if (rc < 0)
         {
@@ -81,6 +98,7 @@ int main(void)
         {
                 LOG_INF("Firmware image already confirmed. No need to confirm again.");
         }
+
         while (1)
         {
                 k_sleep(K_FOREVER);

firmware/src/settings.c

@@ -0,0 +1,166 @@
+#include "settings.h"
+#include <zephyr/kernel.h>
+#include <zephyr/settings/settings.h>
+#include <zephyr/logging/log.h>
+
+LOG_MODULE_REGISTER(app_settings, LOG_LEVEL_DBG);
+
+/* Initialisierung mit Standardwerten als Fallback */
+app_settings_t app_settings = {
+    .audio_vol = 50,
+    .play_norepeat = false,
+    .storage_interval_s = 3600
+};
+
+/* Flags zur Markierung ungespeicherter Änderungen */
+static bool dirty_audio_vol = false;
+static bool dirty_play_norepeat = false;
+static bool dirty_storage_interval = false;
+
+/* Workqueue-Objekt für das asynchrone Speichern */
+static struct k_work_delayable save_work;
+
+/* -------------------------------------------------------------------------- */
+/* Lese-Handler für Zephyr (Aufruf beim Booten durch settings_load)           */
+/* -------------------------------------------------------------------------- */
+
+static int audio_settings_set(const char *name, size_t len, settings_read_cb read_cb, void *cb_arg)
+{
+    if (settings_name_steq(name, "vol", NULL)) {
+        return read_cb(cb_arg, &app_settings.audio_vol, sizeof(app_settings.audio_vol));
+    }
+    return -ENOENT;
+}
+
+static int play_settings_set(const char *name, size_t len, settings_read_cb read_cb, void *cb_arg)
+{
+    if (settings_name_steq(name, "norepeat", NULL)) {
+        uint8_t val = 0;
+        int rc = read_cb(cb_arg, &val, sizeof(val));
+        if (rc >= 0) {
+            app_settings.play_norepeat = (val > 0);
+        }
+        return rc;
+    }
+    return -ENOENT;
+}
+
+static int sys_settings_set(const char *name, size_t len, settings_read_cb read_cb, void *cb_arg)
+{
+    if (settings_name_steq(name, "storage_interval", NULL)) {
+        return read_cb(cb_arg, &app_settings.storage_interval_s, sizeof(app_settings.storage_interval_s));
+    }
+    return -ENOENT;
+}
+
+/* Registrierung der Namespaces für das automatische Laden */
+SETTINGS_STATIC_HANDLER_DEFINE(audio, "audio", NULL, audio_settings_set, NULL, NULL);
+SETTINGS_STATIC_HANDLER_DEFINE(play, "play", NULL, play_settings_set, NULL, NULL);
+SETTINGS_STATIC_HANDLER_DEFINE(sys, "settings", NULL, sys_settings_set, NULL, NULL);
+
+/* -------------------------------------------------------------------------- */
+/* Schreib-Logik (Asynchron über System Workqueue)                            */
+/* -------------------------------------------------------------------------- */
+
+static void save_work_handler(struct k_work *work)
+{
+    if (dirty_audio_vol) {
+        settings_save_one("audio/vol", &app_settings.audio_vol, sizeof(app_settings.audio_vol));
+        dirty_audio_vol = false;
+        LOG_DBG("NVS Write: audio/vol = %d", app_settings.audio_vol);
+    }
+    if (dirty_play_norepeat) {
+        uint8_t val = app_settings.play_norepeat ? 1 : 0;
+        settings_save_one("play/norepeat", &val, sizeof(val));
+        dirty_play_norepeat = false;
+        LOG_DBG("NVS Write: play/norepeat = %d", val);
+    }
+    if (dirty_storage_interval) {
+        settings_save_one("settings/storage_interval", &app_settings.storage_interval_s, sizeof(app_settings.storage_interval_s));
+        dirty_storage_interval = false;
+        LOG_DBG("NVS Write: settings/storage_interval = %d", app_settings.storage_interval_s);
+    }
+}
+
+static void schedule_save(void)
+{
+    if (app_settings.storage_interval_s == 0) {
+        /* Direkter Schreibvorgang, Work sofort einreihen */
+        k_work_cancel_delayable(&save_work);
+        k_work_submit(&save_work.work);
+    } else {
+        /* Timer neustarten (überschreibt laufenden Countdown) */
+        k_work_reschedule(&save_work, K_SECONDS(app_settings.storage_interval_s));
+    }
+}
+
+void app_settings_save_pending_now(void)
+{
+    struct k_work_sync sync;
+    k_work_cancel_delayable_sync(&save_work, &sync);
+    save_work_handler(&save_work.work);
+}
+
+/* -------------------------------------------------------------------------- */
+/* Setter (API für das Protokoll)                                             */
+/* -------------------------------------------------------------------------- */
+
+void app_settings_set_audio_vol(uint8_t vol)
+{
+    if (vol > 100) vol = 100;
+    
+    if (app_settings.audio_vol != vol) {
+        app_settings.audio_vol = vol;
+        dirty_audio_vol = true;
+        schedule_save();
+    }
+}
+
+void app_settings_set_play_norepeat(bool norepeat)
+{
+    if (app_settings.play_norepeat != norepeat) {
+        app_settings.play_norepeat = norepeat;
+        dirty_play_norepeat = true;
+        schedule_save();
+    }
+}
+
+void app_settings_set_storage_interval(uint32_t interval_s)
+{
+    if (interval_s > 7200) interval_s = 7200;
+    
+    if (app_settings.storage_interval_s != interval_s) {
+        app_settings.storage_interval_s = interval_s;
+        dirty_storage_interval = true;
+        schedule_save();
+    }
+}
+
+/* -------------------------------------------------------------------------- */
+/* Initialisierung                                                            */
+/* -------------------------------------------------------------------------- */
+
+int app_settings_init(void)
+{
+    int err;
+
+    k_work_init_delayable(&save_work, save_work_handler);
+
+    err = settings_subsys_init();
+    if (err) {
+        LOG_ERR("settings_subsys_init failed (err %d)", err);
+        return err;
+    }
+
+    /* Lädt alle Werte aus dem NVS in den RAM */
+    err = settings_load();
+    if (err) {
+        LOG_ERR("settings_load failed (err %d)", err);
+        return err;
+    }
+
+    LOG_INF("Settings init ok. Vol=%d, NoRepeat=%d, Interval=%d", 
+            app_settings.audio_vol, app_settings.play_norepeat, app_settings.storage_interval_s);
+    
+    return 0;
+}

firmware/src/uart.c

@@ -0,0 +1,135 @@
+// uart.c
+#include <zephyr/kernel.h>
+#include <zephyr/logging/log.h>
+#include <zephyr/drivers/uart.h>
+#include <zephyr/sys/ring_buffer.h>
+
+LOG_MODULE_REGISTER(uart, LOG_LEVEL_INF);
+
+#define RX_RING_BUF_SIZE 1024
+#define TX_RING_BUF_SIZE 1024
+
+const struct device *const uart_dev = DEVICE_DT_GET_ONE(zephyr_cdc_acm_uart);
+
+RING_BUF_ITEM_DECLARE(rx_ringbuf, RX_RING_BUF_SIZE);
+RING_BUF_ITEM_DECLARE(tx_ringbuf, TX_RING_BUF_SIZE);
+K_SEM_DEFINE(tx_done_sem, 0, 1);
+K_SEM_DEFINE(rx_ready_sem, 0, 1);
+
+static void uart_isr(const struct device *dev, void *user_data)
+{
+    ARG_UNUSED(user_data);
+
+    if (!uart_irq_update(dev))
+    {
+        return;
+    }
+
+    if (uart_irq_rx_ready(dev))
+    {
+        uint8_t *data_ptr;
+        uint32_t claimed_len;
+        int recv_len;
+
+        claimed_len = ring_buf_put_claim(&rx_ringbuf, &data_ptr, RX_RING_BUF_SIZE);
+
+        if (claimed_len > 0)
+        {
+            recv_len = uart_fifo_read(dev, data_ptr, claimed_len);
+            ring_buf_put_finish(&rx_ringbuf, recv_len);
+            if (recv_len > 0)
+            {
+                k_sem_give(&rx_ready_sem);
+            }
+        }
+        else
+        {
+            uart_irq_rx_disable(dev);
+        }
+    }
+    if (uart_irq_tx_ready(dev))
+    {
+        uint8_t *data_ptr;
+        uint32_t claim_len;
+        int written;
+
+        claim_len = ring_buf_get_claim(&tx_ringbuf, &data_ptr, ring_buf_size_get(&tx_ringbuf));
+
+        if (claim_len > 0)
+        {
+            written = uart_fifo_fill(dev, data_ptr, claim_len);
+            ring_buf_get_finish(&tx_ringbuf, written);
+        }
+        else
+        {
+            uart_irq_tx_disable(dev);
+        }
+        k_sem_give(&tx_done_sem);
+    }
+}
+
+int uart_init(void)
+{
+    if (!device_is_ready(uart_dev))
+    {
+        LOG_ERR("UART device not ready");
+        return -ENODEV;
+    }
+
+    uart_irq_callback_set(uart_dev, uart_isr);
+    uart_irq_rx_enable(uart_dev);
+
+    LOG_INF("UART device initialized");
+    return 0;
+}
+
+int uart_write(const uint8_t *data, size_t len, k_timeout_t timeout)
+{
+    size_t written_total = 0;
+    k_sem_reset(&tx_done_sem);
+
+    while (written_total < len)
+    {
+        uint32_t written = ring_buf_put(&tx_ringbuf, &data[written_total], len - written_total);
+        written_total += written;
+
+        if (written > 0)
+        {
+            uart_irq_tx_enable(uart_dev);
+        }
+
+        if (written_total < len)
+        {
+            int ret = k_sem_take(&tx_done_sem, timeout);
+            if (ret != 0)
+            {
+                return ret;
+            }
+        }
+    }
+    return written_total;
+}
+
+int uart_write_string(const char *str, k_timeout_t timeout)
+{
+    return uart_write((const uint8_t *)str, strlen(str), timeout);
+}
+
+int uart_read(uint8_t *data, size_t len, k_timeout_t timeout)
+{
+        uint32_t read_len = ring_buf_get(&rx_ringbuf, data, len);
+
+        if (read_len == 0 && !K_TIMEOUT_EQ(timeout, K_NO_WAIT)) {
+                k_sem_reset(&rx_ready_sem);
+                if (ring_buf_is_empty(&rx_ringbuf)) {
+                        if (k_sem_take(&rx_ready_sem, timeout) != 0) {
+                                return -ETIMEDOUT; 
+                        }
+                }
+                read_len = ring_buf_get(&rx_ringbuf, data, len);
+        }
+        if (read_len > 0) {
+                uart_irq_rx_enable(uart_dev);
+        }
+        return read_len;
+}

firmware/src/usb.c

@@ -1,202 +1,181 @@
-#include <zephyr/kernel.h>
+#include <zephyr/device.h>
-#include <zephyr/logging/log.h>
-#include <zephyr/usb/usb_device.h>
 #include <zephyr/drivers/uart.h>
-#include <zephyr/sys/ring_buffer.h> /* NEU */
+#include <errno.h>
+#include <zephyr/logging/log.h>
+#include <zephyr/usb/usbd.h>
 
-#include <io.h>
+#include "usb.h"
 
-#define RX_RING_BUF_SIZE 1024
+#define USB_MANUFACTURER_STRING "Iten Engineering"
+#define USB_PRODUCT_STRING "Edis Buzzer"
+#define USB_DEVICE_VID 0x1209
+#define USB_DEVICE_PID 0xEDED
 
 LOG_MODULE_REGISTER(usb, LOG_LEVEL_INF);
 
-K_SEM_DEFINE(usb_rx_sem, 0, 1);
+K_SEM_DEFINE(dtr_active_sem, 0, 1);
-K_SEM_DEFINE(usb_tx_sem, 0, 1);
+static uint32_t dtr_active = 0U;
 
-#define UART_NODE DT_ALIAS(usb_uart)
+USBD_DEVICE_DEFINE(cdc_acm_serial,
-const struct device *cdc_dev = DEVICE_DT_GET(UART_NODE);
+		   DEVICE_DT_GET(DT_NODELABEL(zephyr_udc0)),
-static volatile bool rx_interrupt_enabled = false;
+		   USB_DEVICE_VID, USB_DEVICE_PID);
 
-RING_BUF_DECLARE(rx_ringbuf, RX_RING_BUF_SIZE);
+USBD_DESC_LANG_DEFINE(cdc_acm_lang);
+USBD_DESC_MANUFACTURER_DEFINE(cdc_acm_mfr, USB_MANUFACTURER_STRING);
+USBD_DESC_PRODUCT_DEFINE(cdc_acm_product, USB_PRODUCT_STRING);
+IF_ENABLED(CONFIG_HWINFO, (USBD_DESC_SERIAL_NUMBER_DEFINE(cdc_acm_sn)));
 
-static void cdc_acm_irq_cb(const struct device *dev, void *user_data)
+USBD_DESC_CONFIG_DEFINE(fs_cfg_desc, "FS Configuration");
+USBD_DESC_CONFIG_DEFINE(hs_cfg_desc, "HS Configuration");
+
+USBD_CONFIGURATION_DEFINE(fs_config, 0U, 125U, &fs_cfg_desc);
+USBD_CONFIGURATION_DEFINE(hs_config, 0U, 125U, &hs_cfg_desc);
+
+static void fix_code_triple(struct usbd_context *uds_ctx, enum usbd_speed speed)
 {
-    ARG_UNUSED(user_data);
+	if (IS_ENABLED(CONFIG_USBD_CDC_ACM_CLASS) ||
-
+	    IS_ENABLED(CONFIG_USBD_CDC_ECM_CLASS) ||
-    if (!uart_irq_update(dev)) {
+	    IS_ENABLED(CONFIG_USBD_CDC_NCM_CLASS) ||
-        return;
+	    IS_ENABLED(CONFIG_USBD_MIDI2_CLASS) ||
-    }
+	    IS_ENABLED(CONFIG_USBD_AUDIO2_CLASS) ||
-
+	    IS_ENABLED(CONFIG_USBD_VIDEO_CLASS)) {
-    if (uart_irq_rx_ready(dev)) {
+		usbd_device_set_code_triple(uds_ctx, speed,
-        uint8_t buffer[64];
+					    USB_BCC_MISCELLANEOUS, 0x02, 0x01);
-        uint32_t space = ring_buf_space_get(&rx_ringbuf);
+	} else {
-        
+		usbd_device_set_code_triple(uds_ctx, speed, 0, 0, 0);
-        if (space == 0) {
+	}
-            /* Backpressure anwenden: Ringpuffer ist voll.
-               Interrupt deaktivieren, damit Daten im HW-FIFO bleiben 
-               und der USB-Stack den Host drosselt (NAK). */
-            uart_irq_rx_disable(dev);
-        } else {
-            int to_read = MIN(sizeof(buffer), space);
-            int len = uart_fifo_read(dev, buffer, to_read);
-            
-            if (len > 0) {
-                ring_buf_put(&rx_ringbuf, buffer, len);
-                k_sem_give(&usb_rx_sem);
-            }
-        }
-    }
-
-    if (uart_irq_tx_ready(dev)) {
-        uart_irq_tx_disable(dev);
-        k_sem_give(&usb_tx_sem);
-    }
 }
 
-bool usb_wait_for_data(k_timeout_t timeout)
+static void usbd_msg_cb(struct usbd_context *const ctx, const struct usbd_msg *const msg)
 {
-    if (!ring_buf_is_empty(&rx_ringbuf)) {
+	int err;
-        return true;
-    }
 
-    /* Wenn der Puffer leer ist, sicherstellen, dass der RX-Interrupt 
+	LOG_DBG("USBD message: %s", usbd_msg_type_string(msg->type));
-       aktiviert ist, da sonst keine neuen Daten empfangen werden können. */
-    if (device_is_ready(cdc_dev)) {
-        uart_irq_rx_enable(cdc_dev);
-    }
 
-    return (k_sem_take(&usb_rx_sem, timeout) == 0);
+	if (usbd_can_detect_vbus(ctx)) {
+		if (msg->type == USBD_MSG_VBUS_READY) {
+			err = usbd_enable(ctx);
+			if (err) {
+				LOG_ERR("Failed to enable USB device (%d)", err);
+			}
+		}
+
+		if (msg->type == USBD_MSG_VBUS_REMOVED) {
+			err = usbd_disable(ctx);
+			if (err) {
+				LOG_ERR("Failed to disable USB device (%d)", err);
+			}
+		}
+	}
+
+	if (msg->type == USBD_MSG_CDC_ACM_CONTROL_LINE_STATE) {
+		uint32_t rts = 0U; 
+		uint32_t dcd = 0U;
+		uint32_t dsr = 0U;
+
+		if (msg->dev != NULL) {
+			(void)uart_line_ctrl_get(msg->dev, UART_LINE_CTRL_RTS, &rts);
+			(void)uart_line_ctrl_get(msg->dev, UART_LINE_CTRL_DTR, &dtr_active);
+			(void)uart_line_ctrl_get(msg->dev, UART_LINE_CTRL_DCD, &dcd);
+			(void)uart_line_ctrl_get(msg->dev, UART_LINE_CTRL_DSR, &dsr);
+			LOG_DBG("CDC ACM RTS: %u, DTR: %u, DCD: %u, DSR: %u", rts, dtr_active, dcd, dsr);
+			if (dtr_active) {
+				k_sem_give(&dtr_active_sem);
+			}
+		}
+	}
 }
 
-bool usb_read_byte(uint8_t *c)
+int usb_init(void)
 {
-    int ret = ring_buf_get(&rx_ringbuf, c, 1);
+	int err;
-    return (ret > 0);
+
+	err = usbd_add_descriptor(&cdc_acm_serial, &cdc_acm_lang);
+	if (err) {
+		LOG_ERR("Failed to add language descriptor (%d)", err);
+		return err;
+	}
+
+	err = usbd_add_descriptor(&cdc_acm_serial, &cdc_acm_mfr);
+	if (err) {
+		LOG_ERR("Failed to add manufacturer descriptor (%d)", err);
+		return err;
+	}
+
+	err = usbd_add_descriptor(&cdc_acm_serial, &cdc_acm_product);
+	if (err) {
+		LOG_ERR("Failed to add product descriptor (%d)", err);
+		return err;
+	}
+
+	IF_ENABLED(CONFIG_HWINFO, (
+		err = usbd_add_descriptor(&cdc_acm_serial, &cdc_acm_sn);
+	))
+	if (err) {
+		LOG_ERR("Failed to add serial-number descriptor (%d)", err);
+		return err;
+	}
+
+	if (USBD_SUPPORTS_HIGH_SPEED && usbd_caps_speed(&cdc_acm_serial) == USBD_SPEED_HS) {
+		err = usbd_add_configuration(&cdc_acm_serial, USBD_SPEED_HS, &hs_config);
+		if (err) {
+			LOG_ERR("Failed to add HS configuration (%d)", err);
+			return err;
+		}
+
+		err = usbd_register_class(&cdc_acm_serial, "cdc_acm_0", USBD_SPEED_HS, 1);
+		if (err) {
+			LOG_ERR("Failed to register HS CDC ACM class (%d)", err);
+			return err;
+		}
+
+		fix_code_triple(&cdc_acm_serial, USBD_SPEED_HS);
+	}
+
+	err = usbd_add_configuration(&cdc_acm_serial, USBD_SPEED_FS, &fs_config);
+	if (err) {
+		LOG_ERR("Failed to add FS configuration (%d)", err);
+		return err;
+	}
+
+	err = usbd_register_class(&cdc_acm_serial, "cdc_acm_0", USBD_SPEED_FS, 1);
+	if (err) {
+		LOG_ERR("Failed to register FS CDC ACM class (%d)", err);
+		return err;
+	}
+
+	fix_code_triple(&cdc_acm_serial, USBD_SPEED_FS);
+
+	err = usbd_msg_register_cb(&cdc_acm_serial, usbd_msg_cb);
+	if (err) {
+		LOG_ERR("Failed to register USBD callback (%d)", err);
+		return err;
+	}
+
+	err = usbd_init(&cdc_acm_serial);
+	if (err) {
+		LOG_ERR("Failed to initialize USBD (%d)", err);
+		return err;
+	}
+
+	if (!usbd_can_detect_vbus(&cdc_acm_serial)) {
+		err = usbd_enable(&cdc_acm_serial);
+		if (err) {
+			LOG_ERR("Failed to enable USBD (%d)", err);
+			return err;
+		}
+	}
+
+	LOG_INF("USBD CDC ACM initialized");
+	return 0;
 }
 
-int usb_read_buffer(uint8_t *buf, size_t max_len)
+void usb_wait_for_dtr(void)
 {
-    int ret = ring_buf_get(&rx_ringbuf, buf, max_len);
+	k_sem_take(&dtr_active_sem, K_FOREVER);
-    return ret;
 }
 
-void usb_resume_rx(void)
+bool usb_dtr_active(void)
 {
-    if (device_is_ready(cdc_dev)) {
+	return dtr_active != 0U;
-        uart_irq_rx_enable(cdc_dev);
-    }
-}
-
-void usb_write_byte(uint8_t c)
-{
-    if (!device_is_ready(cdc_dev)) {
-        return;
-    }
-    uart_poll_out(cdc_dev, c);
-}
-
-int usb_write_buffer(const uint8_t *buf, size_t len)
-{
-    if (!device_is_ready(cdc_dev))
-    {
-        return -ENODEV;
-    }
-
-    size_t written;
-    while (len > 0)
-    {
-        written = uart_fifo_fill(cdc_dev, buf, len);
-
-        len -= written;
-        buf += written;
-
-        uart_irq_tx_enable(cdc_dev);
-        
-        if (len > 0)
-        {
-
-            if (k_sem_take(&usb_tx_sem, K_MSEC(100)) != 0)
-            {
-                LOG_WRN("USB TX timeout - consumer not reading?");
-                return -ETIMEDOUT;
-            }
-        }
-    }
-    return 0;
-}
-
-void usb_flush_rx(void)
-{
-    uint8_t dummy;
-    if (!device_is_ready(cdc_dev)) return;
-    
-    /* Hardware-FIFO leeren, falls Reste vorhanden */
-    while (uart_fifo_read(cdc_dev, &dummy, 1) > 0);
-    
-    /* Ringpuffer und Semaphore zurücksetzen */
-    ring_buf_reset(&rx_ringbuf);
-    k_sem_reset(&usb_rx_sem);
-}
-
-static void usb_status_cb(enum usb_dc_status_code cb_status, const uint8_t *param)
-{
-    switch (cb_status) {
-    case USB_DC_CONNECTED:
-        /* VBUS wurde vom Zephyr-Stack erkannt */
-        LOG_DBG("VBUS detected, USB device connected");
-        break;
-    case USB_DC_CONFIGURED:
-        LOG_DBG("USB device configured by host");
-        io_usb_status(true);
-        if (device_is_ready(cdc_dev)) {
-            (void)uart_line_ctrl_set(cdc_dev, UART_LINE_CTRL_DCD, 1);
-            (void)uart_line_ctrl_set(cdc_dev, UART_LINE_CTRL_DSR, 1);
-            
-            /* Interrupt-Handler binden und initial aktivieren */
-            uart_irq_callback_set(cdc_dev, cdc_acm_irq_cb);
-            uart_irq_rx_enable(cdc_dev);
-        }
-        break;
-    case USB_DC_DISCONNECTED:
-        /* Kabel wurde gezogen */
-        LOG_DBG("VBUS removed, USB device disconnected");
-        if (device_is_ready(cdc_dev)) {
-            uart_irq_rx_disable(cdc_dev);
-        }
-        io_usb_status(false);
-        break;
-    case USB_DC_RESET:
-        LOG_DBG("USB bus reset");
-        break;
-    default:
-        break;
-    }
-}
-
-int usb_cdc_acm_init(void)
-{
-    LOG_DBG("Initializing USB Stack...");
-
-    /* Zephyr-Treiber registrieren. Verbraucht keinen Strom ohne VBUS. */
-    int ret = usb_enable(usb_status_cb);
-    if (ret != 0) {
-        LOG_ERR("Failed to enable USB (%d)", ret);
-        return ret;
-    }
-
-#if DT_NODE_HAS_STATUS(DT_NODELABEL(cdc_acm_uart0), okay)
-    const struct device *cdc_dev = DEVICE_DT_GET(DT_NODELABEL(cdc_acm_uart0));
-
-    if (!device_is_ready(cdc_dev)) {
-        LOG_ERR("CDC ACM device not ready");
-        return -ENODEV;
-    }
-
-#else
-    LOG_ERR("CDC ACM UART device not found in devicetree");
-    return -ENODEV;
-#endif
-
-    LOG_DBG("USB Stack enabled and waiting for VBUS in hardware");
-    return 0;
 }

firmware/src/usb.h

@@ -1,55 +0,0 @@
-#ifndef USB_CDC_ACM_H
-#define USB_CDC_ACM_H
-
-/**
- * @brief Initializes the USB CDC ACM device
- * @return 0 on success, negative error code on failure
- */
-int usb_cdc_acm_init(void);
-
-/**
- * @brief Waits until data is available in the USB RX FIFO or the timeout expires
- * @param timeout Maximum time to wait for data. Use K_FOREVER for infinite wait.
- * @return true if data is available, false if timeout occurred
- */
-bool usb_wait_for_data(k_timeout_t timeout);
-
-/**
- * @brief Reads a single character from the USB RX FIFO
- * @param c Pointer to store the read character
- * @return true if a character was read, false if no data was available
- */
-bool usb_read_byte(uint8_t *c);
-
-/**
- * @brief Reads a block of data from the USB RX FIFO
- * @param buf Buffer to store the read data
- * @param max_len Maximum number of bytes to read
- * @return Number of bytes read
- */
-int usb_read_buffer(uint8_t *buf, size_t max_len);
-
-/**
- * @brief Resumes the USB RX interrupt when all data has been read
- */
-void usb_resume_rx(void);
-
-/**
- * @brief Writes a single character to the USB TX FIFO
- * @param c Character to write
- */
-void usb_write_byte(uint8_t c);
-
-/**
- * @brief Writes a block of data to the USB TX FIFO
- * @param buf Buffer containing the data to write
- * @param len Number of bytes to write
- */
-int usb_write_buffer(const uint8_t *buf, size_t len);
-
-/**
- * @brief Flushes the USB RX FIFO
- */
-void usb_flush_rx(void);
-
-#endif // USB_CDC_ACM_H

firmware/src/utils.c

@@ -4,6 +4,8 @@
 #include <zephyr/logging/log_ctrl.h>
 #include <zephyr/sys/reboot.h>
 
+#include <settings.h>
+
 #if IS_ENABLED(CONFIG_SOC_SERIES_NRF52X)
 #include <hal/nrf_power.h>
 #elif IS_ENABLED(CONFIG_SOC_SERIES_STM32G0X)
@@ -17,6 +19,7 @@ LOG_MODULE_REGISTER(utils, LOG_LEVEL_DBG);
 
 void reboot_with_status(uint8_t status)
 {
+    app_settings_save_pending_now();
 #if IS_ENABLED(CONFIG_SOC_SERIES_NRF52X)
     /* Korrigierter Aufruf mit Register-Index 0 */
     nrf_power_gpregret_set(NRF_POWER, REBOOT_STATUS_REG_IDX, (uint32_t)status);

tool/buzz.py

@@ -22,6 +22,10 @@ def main():
         # Subparser für Befehle
         subparsers = parser.add_subparsers(dest="command", help="Verfügbare Befehle")
 
+        # Befehl: crc32
+        crc32_parser = subparsers.add_parser("crc32", help="CRC32-Checksumme einer Datei oder eines Verzeichnisses berechnen")
+        crc32_parser.add_argument("path", help="Pfad der Datei auf dem Zielsystem")
+
         # Befehl: flash_info
         flash_info_parser = subparsers.add_parser("flash_info", help="Informationen über den Flash-Speicher des Controllers abfragen")
 
@@ -41,6 +45,21 @@ def main():
         # Befehl: proto
         proto_parser = subparsers.add_parser("proto", help="Protokollversion des Controllers abfragen")
 
+        # Befehl: put_file
+        put_file_parser = subparsers.add_parser("put_file", help="Datei auf das Zielsystem hochladen")
+        put_file_parser.add_argument("source_path", help="Pfad der Datei auf dem lokalen System")
+        put_file_parser.add_argument("dest_path", help="Zielpfad auf dem Zielsystem")
+        put_file_parser.add_argument("-t", "--tags", help="Optionale JSON Tags für den Upload", type=str)
+
+        # Befehl: get_tags
+        get_tags_parser = subparsers.add_parser("get_tags", help="Tags einer Datei anzeigen")
+        get_tags_parser.add_argument("path", help="Pfad der Datei auf dem Zielsystem")
+
+        # Befehl: put_tags
+        put_tags_parser = subparsers.add_parser("put_tags", help="Tags schreiben")
+        put_tags_parser.add_argument("path", help="Pfad der Datei auf dem Zielsystem")
+        put_tags_parser.add_argument("json", help="JSON String (z.B. '{\"json\": {\"t\": \"Titel\"}}')")
+        put_tags_parser.add_argument("-o", "--overwrite", help="Alle bestehenden JSON-Tags vorher löschen", action="store_true")
         # Befehl: rename
         rename_parser = subparsers.add_parser("rename", help="Benennen Sie eine Datei oder einen Ordner auf dem Zielsystem um")
         rename_parser.add_argument("source_path", help="Aktueller Pfad der Datei/des Ordners auf dem Zielsystem")
@@ -54,6 +73,32 @@ def main():
         stat_parser = subparsers.add_parser("stat", help="Informationen zu einer Datei/Ordner")
         stat_parser.add_argument("path", help="Pfad auf dem Zielsystem")
 
+        # Befehl: put_fw
+        put_fw_parser = subparsers.add_parser("put_fw", help="Firmware-Image auf den Controller hochladen")
+        put_fw_parser.add_argument("file_path", help="Pfad zur Firmware-Datei auf dem lokalen System")
+
+        # Befehl: confirm_fw
+        confirm_fw_parser = subparsers.add_parser("confirm_fw", help="Bestätigt ein als 'Testing' markiertes Firmware-Image, damit es beim permanent wird")
+
+        # Befehl: reboot
+        reboot_parser = subparsers.add_parser("reboot", help="Neustart des Controllers")
+
+        # Befehl: play
+        play_parser = subparsers.add_parser("play", help="Startet die Wiedergabe einer Datei")
+        play_parser.add_argument("path", help="Pfad der Datei auf dem Zielsystem")
+        play_parser.add_argument("-i", "--interrupt", help="Sofortige Wiedergabe (Interrupt)", action="store_true")
+
+        # Befehl: stop
+        stop_parser = subparsers.add_parser("stop", help="Stoppt die aktuelle Wiedergabe")
+
+        # Befehl: set
+        set_parser = subparsers.add_parser("set", help="System-Einstellung setzen")
+        set_parser.add_argument("key", help="Schlüssel (z.B. audio/vol)")
+        set_parser.add_argument("value", help="Wert")
+
+        # Befehl: get
+        get_parser = subparsers.add_parser("get", help="System-Einstellung auslesen")
+        get_parser.add_argument("key", help="Schlüssel (z.B. audio/vol)")
         args = parser.parse_args()
 
         if not args.command:
@@ -103,7 +148,12 @@ def main():
 
         try:
             bus.open()
-            if args.command == "get_file":
+            if args.command == "crc32":
+                from core.cmd.crc32 import crc32
+                cmd = crc32(bus)
+                result = cmd.get(args.path)
+                cmd.print(result, args.path)
+            elif args.command == "get_file":
                 from core.cmd.get_file import get_file
                 cmd = get_file(bus)
                 result = cmd.get(args.source_path, args.dest_path)
@@ -128,6 +178,11 @@ def main():
                 cmd = proto(bus)
                 result = cmd.get()
                 cmd.print(result)
+            elif args.command == "put_file":
+                from core.cmd.put_file import put_file
+                cmd = put_file(bus)
+                result = cmd.get(args.source_path, args.dest_path)
+                cmd.print(result)
             elif args.command == "rename":
                 from core.cmd.rename import rename
                 cmd = rename(bus)
@@ -143,7 +198,56 @@ def main():
                 cmd = stat(bus)
                 result = cmd.get(args.path)
                 cmd.print(result, args.path)
-
+            elif args.command == "put_file":
+                from core.cmd.put_file import put_file
+                cmd = put_file(bus)
+                result = cmd.get(args.source_path, args.dest_path, cli_tags_json=args.tags)
+                cmd.print(result)
+            elif args.command == "get_tags":
+                from core.cmd.get_tags import get_tags
+                cmd = get_tags(bus)
+                result = cmd.get(args.path)
+                cmd.print(result, args.path)
+            elif args.command == "put_tags":
+                from core.cmd.put_tags import put_tags
+                cmd = put_tags(bus)
+                result = cmd.get(args.path, args.json, overwrite=args.overwrite)
+                cmd.print(result, args.path)
+            elif args.command == "confirm_fw":
+                from core.cmd.fw_confirm import fw_confirm
+                cmd = fw_confirm(bus)
+                result = cmd.get()
+                cmd.print(result)
+            elif args.command == "put_fw":
+                from core.cmd.put_fw import put_fw
+                cmd = put_fw(bus)
+                result = cmd.get(args.file_path)
+                cmd.print(result)
+            elif args.command == "reboot":
+                from core.cmd.reboot import reboot
+                cmd = reboot(bus)
+                result = cmd.get()
+                cmd.print(result)
+            elif args.command == "play":
+                from core.cmd.play import play
+                cmd = play(bus)
+                result = cmd.get(args.path, interrupt=args.interrupt)
+                cmd.print(result, args.path, interrupt=args.interrupt)
+            elif args.command == "stop":
+                from core.cmd.stop import stop
+                cmd = stop(bus)
+                result = cmd.get()
+                cmd.print(result)
+            elif args.command == "set":
+                from core.cmd.set_setting import set_setting
+                cmd = set_setting(bus)
+                result = cmd.get(args.key, args.value)
+                cmd.print(result, args.key, args.value)
+            elif args.command == "get":
+                from core.cmd.get_setting import get_setting
+                cmd = get_setting(bus)
+                result = cmd.get(args.key)
+                cmd.print(result, args.key)
         finally:
             bus.close()
 

tool/core/cmd/crc32.py

@@ -0,0 +1,36 @@
+# tool/core/cmd/crc32.py
+import struct
+from core.utils import console, console_err
+from core.protocol import COMMANDS, ERRORS
+
+class crc32:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self, path: str):
+        path_bytes = path.encode('utf-8')
+        payload = struct.pack('B', len(path_bytes)) + path_bytes
+        self.bus.send_request(COMMANDS['crc_32'], payload)
+        
+        # 1 Byte Type + 4 Byte Size = 5
+        data = self.bus.receive_response(length=8, timeout=5)  
+        
+        if not data or data.get('type') == 'error':
+            return None
+
+        payload = data['data']
+        crc_value = struct.unpack('<I', payload[0:4])[0]
+        audio_crc_value = struct.unpack('<I', payload[4:8])[0]
+        result = {
+            'crc32': crc_value,
+            'audio_crc32': audio_crc_value
+        }
+        return result
+
+    def print(self, result, path: str):
+        if not result:
+            return
+
+        console.print(f"[info_title]CRC32[/info_title] für [info]{path}[/info]:")
+        console.print(f"  • CRC32 Datei: [info]{result['crc32']:08X}[/info]")
+        console.print(f"  • CRC32 Audio: [info]{result['audio_crc32']:08X}[/info]")

tool/core/cmd/fw_confirm.py

@@ -0,0 +1,23 @@
+from core.utils import console, console_err
+from core.protocol import COMMANDS
+
+class fw_confirm:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self):
+        # Fehler 1: Der Key in COMMANDS heißt 'confirm_fw'
+        self.bus.send_request(COMMANDS['confirm_fw'])
+        
+        # Fehler 2: Try-Except entfernt, damit der ControllerError (z.B. bei nicht-pending Image)
+        # sauber nach buzz.py durchschlägt.
+        data = self.bus.receive_ack()
+        return data is not None and data.get('type') == 'ack'
+
+    def print(self, result):
+        if result:
+            console.print("✓ Laufende Firmware wurde [info]erfolgreich bestätigt[/info] (Permanent).")
+        else:
+            # Wird im Fehlerfall eigentlich nicht mehr erreicht, da buzz.py abbricht, 
+            # bleibt aber als Fallback für leere Antworten.
+            console_err.print("❌ Fehler beim Bestätigen der Firmware.")

tool/core/cmd/get_file.py

@@ -2,6 +2,7 @@
 import struct
 import zlib
 from pathlib import Path
+from rich.progress import Progress, SpinnerColumn, TextColumn, BarColumn, DownloadColumn, TransferSpeedColumn, TimeRemainingColumn
 from core.utils import console, console_err
 from core.protocol import COMMANDS
 
@@ -21,24 +22,34 @@ class get_file:
 
         source_path_bytes = source_path.encode('utf-8')
         payload = struct.pack('B', len(source_path_bytes)) + source_path_bytes
-        device_file_crc = None
-        try:
-            self.bus.send_request(COMMANDS['crc_32'], payload)
-            crc_resp = self.bus.receive_response(length=4)
-            if crc_resp and crc_resp.get('type') == 'response':
-                device_file_crc = struct.unpack('<I', crc_resp['data'])[0]
-        except Exception:
-            device_file_crc = None
-
         self.bus.send_request(COMMANDS['get_file'], payload)
 
-        stream_res = self.bus.receive_stream()  
+        # Fortschrittsbalken Setup
+        with Progress(
+            SpinnerColumn(),
+            TextColumn("[progress.description]{task.description}"),
+            BarColumn(),
+            DownloadColumn(),
+            TransferSpeedColumn(),
+            "•",
+            TimeRemainingColumn(),
+            console=console,
+            transient=False
+        ) as progress:
+            
+            task = progress.add_task(f"Lade {source_path}...", total=None)
+
+            def update_bar(received, total):
+                progress.update(task, total=total, completed=received)
+
+            stream_res = self.bus.receive_stream(progress_callback=update_bar)  
         
         if not stream_res or stream_res.get('type') == 'error':
             return None
-
         file_data = stream_res['data']
-        remote_crc = stream_res['crc32']
+        remote_crc = stream_res.get('crc32')
+        local_crc = zlib.crc32(file_data) & 0xFFFFFFFF
+        duratuion = stream_res.get('duration')
 
         if local_crc == remote_crc:
             with open(p, 'wb') as f:
@@ -55,8 +66,8 @@ class get_file:
             'dest_path': dest_path,
             'crc32_remote': remote_crc,
             'crc32_local': local_crc,
-            'crc32_device_file': device_file_crc,
+            'size': len(file_data),
-            'size': len(file_data)
+            'duration': duratuion
         }
 
     def print(self, result):
@@ -74,3 +85,5 @@ class get_file:
         if result.get('crc32_device_file') is not None:
             console.print(f"  • Device CRC: [info]{result['crc32_device_file']:08X}[/info]")
         console.print(f"  • Zielpfad:   [info]{result['dest_path']}[/info]")
+        if result.get('duration') is not None and result.get('duration') > 0:
+            console.print(f"  • Dauer:      [info]{result['duration']:.2f} s[/info]")

tool/core/cmd/get_setting.py

@@ -0,0 +1,37 @@
+import struct
+from core.utils import console
+from core.protocol import COMMANDS
+
+class get_setting:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self, key: str):
+        key_bytes = key.encode('utf-8')
+        payload = struct.pack('B', len(key_bytes)) + key_bytes
+        
+        self.bus.send_request(COMMANDS['get_setting'], payload)
+        
+        # varlen_params=1 liest exakt 1 Byte Länge + entsprechend viele Datenbytes
+        data = self.bus.receive_response(length=0, varlen_params=1)
+        
+        if not data or data.get('type') == 'error':
+            return None
+
+        raw = data['data']
+        val_len = raw[0]
+        val_buf = raw[1:1+val_len]
+
+        # Binärdaten zurück in Python-Typen parsen
+        if key == "audio/vol" and val_len == 1:
+            return struct.unpack('<B', val_buf)[0]
+        elif key == "play/norepeat" and val_len == 1:
+            return bool(struct.unpack('<B', val_buf)[0])
+        elif key == "settings/storage_interval" and val_len == 2:
+            return struct.unpack('<H', val_buf)[0]
+        else:
+            return None
+
+    def print(self, result, key: str):
+        if result is not None:
+            console.print(f"⚙️  [info]{key}[/info] = [info]{result}[/info]")

tool/core/cmd/get_tags.py

@@ -0,0 +1,43 @@
+# tool/core/cmd/get_tags.py
+import struct
+import json
+from core.utils import console
+from core.protocol import COMMANDS
+from core.tag import TagManager
+
+class get_tags:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get_raw_tlvs(self, path: str):
+        """Holt die rohen TLVs vom Gerät."""
+        path_bytes = path.encode('utf-8')
+        payload = struct.pack('B', len(path_bytes)) + path_bytes
+        self.bus.send_request(COMMANDS['get_tags'], payload)
+        
+        stream_res = self.bus.receive_stream()
+        if not stream_res or stream_res.get('type') == 'error': return []
+        
+        return TagManager.parse_tlvs(stream_res['data'])
+
+    def get(self, path: str):
+        tlvs = self.get_raw_tlvs(path)
+        result = {"system": {}, "json": {}}
+        
+        for tlv in tlvs:
+            if tlv['type'] == 0x00:
+                if tlv['index'] == 0x00 and len(tlv['value']) == 8:
+                    codec, bit_depth, _, samplerate = struct.unpack('<BBHI', tlv['value'])
+                    result["system"]["format"] = {"codec": codec, "bit_depth": bit_depth, "samplerate": samplerate}
+                elif tlv['index'] == 0x01 and len(tlv['value']) == 4:
+                    result["system"]["crc32"] = f"0x{struct.unpack('<I', tlv['value'])[0]:08X}"
+            elif tlv['type'] == 0x10:
+                try:
+                    result["json"].update(json.loads(tlv['value'].decode('utf-8')))
+                except:
+                    pass
+        return result
+
+    def print(self, result, path: str):
+        console.print(f"[info]Metadaten[/info] für [info]{path}[/info]:")
+        console.print(json.dumps(result, indent=2, ensure_ascii=False))

tool/core/cmd/play.py

@@ -0,0 +1,23 @@
+import struct
+from core.utils import console, console_err
+from core.protocol import COMMANDS
+
+class play:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self, path: str, interrupt: bool):
+        flags = 0x01 if interrupt else 0x00
+        path_bytes = path.encode('utf-8')
+        
+        # Payload: [1 Byte Flags] + [1 Byte Path Length] + [Path String]
+        payload = struct.pack('B', flags) + struct.pack('B', len(path_bytes)) + path_bytes
+        
+        self.bus.send_request(COMMANDS['play'], payload)
+        data = self.bus.receive_ack()
+        return data is not None and data.get('type') == 'ack'
+
+    def print(self, result, path: str, interrupt: bool):
+        if result:
+            mode = "sofort (Interrupt)" if interrupt else "in die Warteschlange (Queue)"
+            console.print(f"▶ Wiedergabe von [info]{path}[/info] {mode} eingereiht.")

tool/core/cmd/put_file.py

@@ -0,0 +1,100 @@
+# tool/core/cmd/put_file.py
+import struct
+import zlib
+from pathlib import Path
+from rich.progress import Progress, SpinnerColumn, TextColumn, BarColumn, DownloadColumn, TransferSpeedColumn, TimeRemainingColumn
+from core.utils import console, console_err
+from core.protocol import COMMANDS
+from core.tag import TagManager
+from core.cmd.put_tags import put_tags
+
+class put_file:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self, source_path: str, dest_path: str, cli_tags_json: str = None):
+        try:
+            p = Path(source_path)
+            if not p.exists() or not p.is_file():
+                console_err.print(f"Fehler: Quelldatei existiert nicht: {source_path}")
+                return None
+            with open(p, 'rb') as f:
+                file_data = f.read()
+        except Exception as e:
+            console_err.print(f"Fehler beim Lesen: {e}")
+            return None
+
+        # 1. Lokale Tags abtrennen
+        audio_data, local_tlvs = TagManager.split_file(file_data)
+        audio_size = len(audio_data)
+
+        # 2. Upload der REINEN Audiodaten
+        dest_path_bytes = dest_path.encode('utf-8')
+        payload = struct.pack('B', len(dest_path_bytes)) + dest_path_bytes + struct.pack('<I', audio_size)
+        
+        self.bus.send_request(COMMANDS['put_file'], payload)
+        self.bus.receive_ack(timeout=5.0)
+
+        with Progress(SpinnerColumn(), TextColumn("[progress.description]{task.description}"), BarColumn(), DownloadColumn(), TransferSpeedColumn(), "•", TimeRemainingColumn(), console=console, transient=False) as progress:
+            task = progress.add_task(f"Sende {source_path}...", total=audio_size)
+            stream_res = self.bus.send_stream(audio_data, progress_callback=lambda sent, total: progress.update(task, total=total, completed=sent))  
+        
+        if not stream_res: return None
+        
+        remote_crc = stream_res.get('crc32')
+        local_crc = zlib.crc32(audio_data) & 0xFFFFFFFF
+        
+        if local_crc != remote_crc:
+            return {'success': False, 'source_path': source_path, 'crc32_remote': remote_crc, 'crc32_local': local_crc}
+
+        # 3. Tags aktualisieren (CRC32 + evtl. CLI-Tags)
+        # Alten CRC-Tag entfernen, neuen einsetzen
+        final_tlvs = [t for t in local_tlvs if not (t['type'] == 0x00 and t['index'] == 0x01)]
+        final_tlvs.append({'type': 0x00, 'index': 0x01, 'value': struct.pack('<I', local_crc)})
+
+        # Falls CLI-Tags übergeben wurden (-t), diese priorisiert anwenden
+        if cli_tags_json:
+            try:
+                cli_tlvs = TagManager.parse_cli_json(cli_tags_json)
+                # Bestehendes JSON löschen, wenn neues im CLI-Input definiert ist
+                if any(t['type'] == 0x10 for t in cli_tlvs):
+                    final_tlvs = [t for t in final_tlvs if t['type'] != 0x10]
+                final_tlvs.extend(cli_tlvs)
+            except ValueError as e:
+                console_err.print(f"[warning]Warnung: Tags konnten nicht geparst werden ({e}). Datei wurde ohne extra Tags hochgeladen.[/warning]")
+
+        # 4. Tags via separatem Befehl anhängen
+        tag_cmd = put_tags(self.bus)
+        tag_blob = TagManager.build_blob(final_tlvs)
+        tag_cmd.send_blob(dest_path, tag_blob)
+
+        return {
+            'success': True,
+            'source_path': source_path,
+            'dest_path': dest_path,
+            'crc32_remote': remote_crc,
+            'crc32_local': local_crc,
+            'size': audio_size,
+            'duration': stream_res.get('duration')
+        }
+
+    def print(self, result):
+        if not result:
+            return
+
+        if result.get('success'):
+            console.print(f"✓ Datei [info]{result['source_path']}[/info] erfolgreich hochgeladen und Tags generiert.")
+            console.print(f"  • Größe:      [info]{result['size'] / 1024:.2f} KB[/info]")
+        else:
+            console_err.print(f"❌ CRC-FEHLER: Datei [error]{result['source_path']}[/error] wurde auf dem Gerät korrumpiert!")
+        
+        if 'crc32_remote' in result:
+            console.print(f"  • Remote CRC: [info]{result['crc32_remote']:08X}[/info]")
+        if 'crc32_local' in result:
+            console.print(f"  • Local CRC:  [info]{result['crc32_local']:08X}[/info]")
+            
+        if 'dest_path' in result:
+            console.print(f"  • Zielpfad:   [info]{result['dest_path']}[/info]")
+            
+        if result.get('duration') is not None and result.get('duration') > 0:
+            console.print(f"  • Dauer:      [info]{result['duration']:.2f} s[/info]")

tool/core/cmd/put_fw.py

@@ -0,0 +1,89 @@
+import struct
+import zlib
+from pathlib import Path
+from rich.progress import Progress, SpinnerColumn, TextColumn, BarColumn, DownloadColumn, TransferSpeedColumn, TimeRemainingColumn
+from core.utils import console, console_err
+from core.protocol import COMMANDS
+
+class put_fw:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self, file_path: str):
+        try:
+            p = Path(file_path)
+            if not p.exists() or not p.is_file():
+                console_err.print(f"Fehler: Firmware-Datei existiert nicht: {file_path}")
+                return None
+            
+            file_size = p.stat().st_size
+            with open(p, 'rb') as f:
+                file_data = f.read()
+        except Exception as e:
+            console_err.print(f"Lese-Fehler: {e}")
+            return None
+
+        # 1. Schritt: Löschvorgang mit minimalem Feedback
+        with Progress(
+            SpinnerColumn(),
+            TextColumn("[progress.description]{task.description}"),
+            BarColumn(),
+            console=console,
+            transient=True
+        ) as progress:
+            erase_task = progress.add_task("Lösche Firmware Slot...", total=None)
+            
+            payload = struct.pack('<I', file_size)
+            self.bus.send_request(COMMANDS['put_fw'], payload)
+            
+            # Warten auf ACK (Balken pulsiert ohne Byte-Anzeige)
+            self.bus.receive_ack(timeout=10.0)
+            progress.update(erase_task, description="✓ Slot gelöscht", completed=100, total=100)
+
+        # 2. Schritt: Eigentlicher Transfer mit allen Metriken (Bytes, Speed, Time)
+        with Progress(
+            SpinnerColumn(),
+            TextColumn("[progress.description]{task.description}"),
+            BarColumn(),
+            DownloadColumn(),
+            TransferSpeedColumn(),
+            "•",
+            TimeRemainingColumn(),
+            console=console,
+            transient=False
+        ) as progress:
+            transfer_task = progress.add_task("Sende Firmware...", total=file_size)
+            
+            stream_res = self.bus.send_stream(
+                file_data, 
+                progress_callback=lambda sent, total: progress.update(transfer_task, total=total, completed=sent)
+            )  
+        
+        if not stream_res: 
+            return None
+        
+        remote_crc = stream_res.get('crc32')
+        local_crc = zlib.crc32(file_data) & 0xFFFFFFFF
+
+        return {
+            'success': local_crc == remote_crc,
+            'source_path': file_path,
+            'crc32_remote': remote_crc,
+            'crc32_local': local_crc,
+            'size': file_size,
+            'duration': stream_res.get('duration')
+        }
+
+    def print(self, result):
+        if not result: 
+            return
+
+        if result['success']:
+            console.print(f"✓ Firmware [info]{result['source_path']}[/info] erfolgreich in Slot 1 geschrieben.")
+            console.print("  [warning]Achtung:[/warning] Das Image ist als 'Pending' markiert. Führe 'reboot' aus, um das Update zu installieren.")
+        else:
+            console_err.print(f"❌ CRC-FEHLER: Die Firmware wurde korrumpiert übertragen!")
+        
+        console.print(f"  • Größe:      [info]{result['size'] / 1024:.2f} KB[/info]")
+        console.print(f"  • Remote CRC: [info]{result['crc32_remote']:08X}[/info]")
+        console.print(f"  • Local CRC:  [info]{result['crc32_local']:08X}[/info]")

tool/core/cmd/put_tags.py

@@ -0,0 +1,68 @@
+# tool/core/cmd/put_tags.py
+import struct
+import json
+from core.utils import console, console_err
+from core.protocol import COMMANDS
+from core.tag import TagManager
+from core.cmd.get_tags import get_tags
+
+class put_tags:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self, path: str, json_str: str, overwrite: bool):
+        try:
+            new_tlvs = TagManager.parse_cli_json(json_str)
+        except ValueError as e:
+            console_err.print(f"[error]{e}[/error]")
+            return False
+
+        getter = get_tags(self.bus)
+        existing_tlvs = getter.get_raw_tlvs(path)
+
+        if overwrite:
+            # Bei Overwrite: Alle alten JSON-Tags löschen
+            existing_tlvs = [t for t in existing_tlvs if t['type'] != 0x10]
+        else:
+            # Ohne Overwrite: Bestehende JSON-Werte mit neuen mischen
+            existing_json = {}
+            for t in existing_tlvs:
+                if t['type'] == 0x10:
+                    try: existing_json.update(json.loads(t['value'].decode('utf-8')))
+                    except: pass
+            
+            # Neues JSON einmischen
+            for nt in new_tlvs:
+                if nt['type'] == 0x10:
+                    try: existing_json.update(json.loads(nt['value'].decode('utf-8')))
+                    except: pass
+
+            existing_tlvs = [t for t in existing_tlvs if t['type'] != 0x10]
+            if existing_json:
+                existing_tlvs.append({'type': 0x10, 'index': 0x00, 'value': json.dumps(existing_json, ensure_ascii=False).encode('utf-8')})
+            
+            # System-Tags (0x00) überschreiben alte direkt
+            new_sys_tlvs = [t for t in new_tlvs if t['type'] == 0x00]
+            for nt in new_sys_tlvs:
+                existing_tlvs = [t for t in existing_tlvs if not (t['type'] == nt['type'] and t['index'] == nt['index'])]
+                existing_tlvs.append(nt)
+
+            new_tlvs = existing_tlvs
+
+        blob = TagManager.build_blob(new_tlvs)
+        return self.send_blob(path, blob)
+
+    def send_blob(self, path: str, blob: bytes):
+        path_bytes = path.encode('utf-8')
+        req_payload = struct.pack('B', len(path_bytes)) + path_bytes + struct.pack('<I', len(blob))
+        
+        self.bus.send_request(COMMANDS['put_tags'], req_payload)
+        self.bus.receive_ack(timeout=2.0)
+        
+        if self.bus.send_stream(blob):
+            return True
+        return False
+
+    def print(self, result, path: str):
+        if result:
+            console.print(f"✓ Metadaten erfolgreich auf [info]{path}[/info] geschrieben.")

tool/core/cmd/reboot.py

@@ -0,0 +1,23 @@
+import serial
+from core.utils import console, console_err
+from core.protocol import COMMANDS
+
+class reboot:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self):
+        self.bus.send_request(COMMANDS['reboot'])
+        try:
+            data = self.bus.receive_ack()
+            return data is not None and data.get('type') == 'ack'
+        except serial.SerialException:
+            # SerialException MUSS hier ignoriert werden, da der Controller 
+            # den USB-Port beim Reboot hart schließt
+            return True
+
+    def print(self, result):
+        if result:
+            console.print("🔄 Neustart-Befehl erfolgreich gesendet. Controller [info]bootet neu...[/info]")
+        else:
+            console_err.print("❌ Fehler beim Senden des Neustart-Befehls.")

tool/core/cmd/set_setting.py

@@ -0,0 +1,38 @@
+import struct
+from core.utils import console, console_err
+from core.protocol import COMMANDS
+
+class set_setting:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self, key: str, value: str):
+        key_bytes = key.encode('utf-8')
+        val_bytes = b''
+
+        # Typen-Konvertierung basierend auf dem Key
+        try:
+            if key == "audio/vol":
+                val_bytes = struct.pack('<B', int(value))
+            elif key == "play/norepeat":
+                val_int = 1 if str(value).lower() in ['1', 'true', 'on', 'yes'] else 0
+                val_bytes = struct.pack('<B', val_int)
+            elif key == "settings/storage_interval":
+                val_bytes = struct.pack('<H', int(value))
+            else:
+                console_err.print(f"[error]Unbekannter Key: {key}[/error]")
+                return False
+        except ValueError:
+            console_err.print(f"[error]Ungültiger Wert für {key}: {value}[/error]")
+            return False
+        
+        # Payload: [Key Len] [Key] [Val Len] [Val Bytes]
+        payload = struct.pack('B', len(key_bytes)) + key_bytes + struct.pack('B', len(val_bytes)) + val_bytes
+        self.bus.send_request(COMMANDS['set_setting'], payload)
+        
+        data = self.bus.receive_ack()
+        return data is not None and data.get('type') == 'ack'
+
+    def print(self, result, key: str, value: str):
+        if result:
+            console.print(f"✓ Setting [info]{key}[/info] wurde auf [info]{value}[/info] gesetzt.")

tool/core/cmd/stop.py

@@ -0,0 +1,15 @@
+from core.utils import console, console_err
+from core.protocol import COMMANDS
+
+class stop:
+    def __init__(self, bus):
+        self.bus = bus
+
+    def get(self):
+        self.bus.send_request(COMMANDS['stop'])
+        data = self.bus.receive_ack()
+        return data is not None and data.get('type') == 'ack'
+
+    def print(self, result):
+        if result:
+            console.print("⏹ Wiedergabe gestoppt und Warteschlange geleert.")

tool/core/protocol.py

@@ -2,7 +2,7 @@
 VERSION = {
     "min_protocol_version": 1,
     "max_protocol_version": 1,
-    "current_protocol_version": None
+    "current_protocol_version": None,
 }
 
 SYNC_SEQ = b'BUZZ'
@@ -33,56 +33,45 @@ ERRORS = {
     0x40: "NOT_IMPLEMENTED",
 }
 
-FRAME_TYPE_REQUEST = 0x01
-FRAME_TYPE_ACK = 0x10
-FRAME_TYPE_RESPONSE = 0x11
-FRAME_TYPE_STREAM_START = 0x12
-FRAME_TYPE_STREAM_CHUNK = 0x13
-FRAME_TYPE_STREAM_END = 0x14
-FRAME_TYPE_LIST_START = 0x15
-FRAME_TYPE_LIST_CHUNK = 0x16
-FRAME_TYPE_LIST_END = 0x17
-FRAME_TYPE_ERROR = 0xFF
-
 FRAME_TYPES = {
-    'request': FRAME_TYPE_REQUEST,
+    'request': 0x01,
-    'ack': FRAME_TYPE_ACK,
+
-    'response': FRAME_TYPE_RESPONSE,
+    'ack': 0x10,
-    'error': FRAME_TYPE_ERROR,
+
-    'stream_start': FRAME_TYPE_STREAM_START,
+    'response': 0x11,
-    'stream_chunk': FRAME_TYPE_STREAM_CHUNK,
+    'stream_start': 0x12,
-    'stream_end': FRAME_TYPE_STREAM_END,
+    'stream_chunk': 0x13,
-    'list_start': FRAME_TYPE_LIST_START,
+    'stream_end': 0x14,
-    'list_chunk': FRAME_TYPE_LIST_CHUNK,
+    'list_start': 0x15,
-    'list_end': FRAME_TYPE_LIST_END
+    'list_chunk': 0x16,
+    'list_end': 0x17,
+
+    'error': 0xFF,
 }
 
-CMD_GET_PROTOCOL_VERSION = 0x00
-CMD_GET_FIRMWARE_STATUS = 0x01
-CMD_GET_FLASH_INFO = 0x02
-
-CMD_LIST_DIR = 0x10
-CMD_CRC_32 = 0x11
-CMD_MKDIR = 0x12
-CMD_RM = 0x13
-CMD_STAT = 0x18
-CMD_RENAME = 0x19
-
-CMD_PUT_FILE = 0x20
-CMD_PUT_FW = 0x21
-CMD_GET_FILE = 0x22
-
 COMMANDS = {
-    'get_protocol_version': CMD_GET_PROTOCOL_VERSION,
+    'get_protocol_version': 0x00,
-    'get_firmware_status': CMD_GET_FIRMWARE_STATUS,
+    'get_firmware_status': 0x01,
-    'get_flash_info': CMD_GET_FLASH_INFO,
+    'get_flash_info': 0x02,
-    'list_dir': CMD_LIST_DIR,
+    'confirm_fw': 0x03,
-    'stat': CMD_STAT,
+    'reboot': 0x04,
-    'rm': CMD_RM,
+
-    'rename': CMD_RENAME,
+    'list_dir': 0x10,
-    'mkdir': CMD_MKDIR,
+    'crc_32': 0x11,
-    'crc_32': CMD_CRC_32,
+    'mkdir': 0x12,
-    'put_file': CMD_PUT_FILE,
+    'rm': 0x13,
-    'get_file': CMD_GET_FILE,
+    'stat': 0x18,
-    'put_fw': CMD_PUT_FW,
+    'rename': 0x19,
+
+    'put_file': 0x20,
+    'put_fw': 0x21,
+    'get_file': 0x22,
+    'put_tags': 0x24,
+    'get_tags': 0x25,
+
+    'play': 0x30,
+    'stop': 0x31,
+
+    'set_setting': 0x40,
+    'get_setting': 0x41,
 }

tool/core/serial_conn.py

@@ -120,6 +120,40 @@ class SerialBus:
             full_frame += payload
         self.send_binary(full_frame)
 
+    def send_stream(self, data: bytes, chunk_size: int = 4096, progress_callback=None):
+        """Sendet einen Datenstrom in Chunks und wartet auf die Bestätigung (CRC)."""
+        start_time = time.time()
+        size = len(data)
+        sent_size = 0
+        
+        while sent_size < size:
+            chunk = data[sent_size:sent_size+chunk_size]
+            self.connection.write(chunk)
+            sent_size += len(chunk)
+            
+            if progress_callback:
+                progress_callback(sent_size, size)
+
+        if not self.wait_for_sync(SYNC_SEQ, max_time=self.timeout + 5.0):
+            raise TimeoutError("Timeout beim Warten auf Stream-Ende (Flash ist evtl. noch beschäftigt).")
+
+        ftype = self._read_exact(1, "Frame-Typ")[0]
+
+        if ftype == FRAME_TYPES['stream_end']:
+            end_time = time.time()
+            crc32 = struct.unpack('<I', self._read_exact(4, "CRC32"))[0]
+            return {
+                'crc32': crc32,
+                'duration': end_time - start_time
+            }
+        elif ftype == FRAME_TYPES['error']:
+            err_code_raw = self.connection.read(1)
+            err_code = err_code_raw[0] if err_code_raw else 0xFF
+            err_name = ERRORS.get(err_code, "UNKNOWN")
+            raise ControllerError(err_code, err_name)
+        else:
+            raise ValueError(f"Unerwarteter Frame-Typ nach Stream-Upload: 0x{ftype:02X}")
+
     def receive_ack(self, timeout: float = None):
         wait_time = timeout if timeout is not None else self.timeout
 
@@ -212,42 +246,46 @@ class SerialBus:
                 err_name = ERRORS.get(err_code, "UNKNOWN")
                 raise ControllerError(err_code, err_name)
 
-    def receive_stream(self, chunk_size: int = 1024):
+    def receive_stream(self, chunk_size: int = 1024, progress_callback=None):
         """Liest einen Datenstrom in Chunks, bis ein Fehler oder Ende-Signal kommt."""
         is_stream = False
         data_chunks = []
+        start_time = None
         
         while True:
             if not self.wait_for_sync(SYNC_SEQ):
                 raise TimeoutError("Timeout beim Warten auf Sync im Stream-Modus.")
 
             ftype = self._read_exact(1, "Frame-Typ")[0]
-            if self.debug: console.print(f"Empfangener Frame-Typ: 0x{ftype:02X} (start: 0x{FRAME_TYPES['stream_start']:02X}, chunk: 0x{FRAME_TYPES['stream_chunk']:02X}, end: 0x{FRAME_TYPES['stream_end']:02X})")
 
             if ftype == FRAME_TYPES['stream_start']:
                 is_stream = True
                 data_chunks = []
                 size = struct.unpack('<I', self._read_exact(4, "Stream-Größe"))[0]
-                if self.debug: console.print(f"Stream gestartet, erwartete Gesamtgröße: {size} Bytes")
+                start_time = time.time()
                 
                 received_size = 0
                 while received_size < size:
                     chunk_length = min(chunk_size, size - received_size)
-                    try:
+                    chunk_data = self._read_exact(chunk_length, f"Daten-Chunk @ {received_size}/{size}")
-                        chunk_data = self._read_exact(chunk_length, f"Daten-Chunk @ {received_size}/{size}")
-                    except Exception as e:
-                        raise IOError(f"Stream-Abbruch bei {received_size}/{size} Bytes: {e}") from e
                     data_chunks.append(chunk_data)
                     received_size += len(chunk_data)
-                    if self.debug: console.print(f"Empfangen: {received_size}/{size} Bytes ({(received_size/size)*100:.2f}%)")
+                    
+                    # Callback für UI-Update (z.B. Progress Bar)
+                    if progress_callback:
+                        progress_callback(received_size, size)
+
                 if self.debug: console.print("Stream vollständig empfangen.")
 
             elif ftype == FRAME_TYPES['stream_end']:
+                end_time = time.time()
                 if not is_stream: raise ValueError("Ende ohne Start.")
                 crc32 = struct.unpack('<I', self._read_exact(4, "CRC32"))[0]
-                if self.debug: console.print(f"Stream-Ende empfangen, CRC32: 0x{crc32:08X}")
+                return {
-                
+                    'data': b''.join(data_chunks), 
-                return {'data': b''.join(data_chunks), 'crc32': crc32}
+                    'crc32': crc32, 
+                    'duration': end_time - start_time if start_time and end_time else None
+                }
 
             # elif ftype == FRAME_TYPES['list_chunk']:
             #     if not is_list: raise ValueError("Chunk ohne Start.")

tool/core/tag.py

@@ -0,0 +1,95 @@
+# tool/core/tag.py
+import struct
+import json
+
+class TagManager:
+    FOOTER_MAGIC = b'TAG!'
+    FOOTER_SIZE = 8
+    FORMAT_VERSION = 1
+
+    @classmethod
+    def split_file(cls, file_data: bytes):
+        """Trennt eine Datei in reine Audiodaten und eine Liste von TLVs auf."""
+        if len(file_data) < cls.FOOTER_SIZE:
+            return file_data, []
+
+        footer = file_data[-cls.FOOTER_SIZE:]
+        total_size, version, magic = struct.unpack('<HH4s', footer)
+
+        if magic != cls.FOOTER_MAGIC or version != cls.FORMAT_VERSION:
+            return file_data, []
+
+        if total_size > len(file_data) or total_size < cls.FOOTER_SIZE:
+            return file_data, []
+
+        audio_limit = len(file_data) - total_size
+        audio_data = file_data[:audio_limit]
+        tag_data = file_data[audio_limit:-cls.FOOTER_SIZE]
+
+        tlvs = cls.parse_tlvs(tag_data)
+        return audio_data, tlvs
+
+    @classmethod
+    def parse_tlvs(cls, tag_data: bytes):
+        """Parst einen rohen TLV-Byteblock in eine Liste von Dictionaries."""
+        tlvs = []
+        pos = 0
+        while pos + 4 <= len(tag_data):
+            t, i, length = struct.unpack('<BBH', tag_data[pos:pos+4])
+            pos += 4
+            if pos + length > len(tag_data):
+                break # Korrupt
+            val = tag_data[pos:pos+length]
+            tlvs.append({'type': t, 'index': i, 'value': val})
+            pos += length
+        return tlvs
+
+    @classmethod
+    def build_blob(cls, tlvs: list):
+        """Baut aus einer TLV-Liste den fertigen Byte-Blob inklusive Footer."""
+        # Sortierung: Type 0x00 (System) zwingend nach vorne
+        tlvs = sorted(tlvs, key=lambda x: x['type'])
+        
+        payload = b""
+        for tlv in tlvs:
+            payload += struct.pack('<BBH', tlv['type'], tlv['index'], len(tlv['value']))
+            payload += tlv['value']
+        
+        total_size = len(payload) + cls.FOOTER_SIZE
+        footer = struct.pack('<HH4s', total_size, cls.FORMAT_VERSION, cls.FOOTER_MAGIC)
+        return payload + footer
+
+    @classmethod
+    def parse_cli_json(cls, json_str: str):
+        """Konvertiert den Kommandozeilen-JSON-String in neue TLVs."""
+        try:
+            data = json.loads(json_str)
+        except json.JSONDecodeError as e:
+            raise ValueError(f"Ungültiges JSON-Format: {e}")
+
+        new_tlvs = []
+        
+        # 1. System Tags (0x00)
+        if "system" in data:
+            sys_data = data["system"]
+            if "format" in sys_data:
+                fmt = sys_data["format"]
+                if isinstance(fmt, str) and fmt.startswith("0x"):
+                    val = bytes.fromhex(fmt[2:])
+                else:
+                    val = struct.pack('<BBHI', fmt.get("codec", 0), fmt.get("bit_depth", 16), 0, fmt.get("samplerate", 16000))
+                new_tlvs.append({'type': 0x00, 'index': 0x00, 'value': val})
+            
+            if "crc32" in sys_data:
+                crc_str = sys_data["crc32"]
+                crc_val = int(crc_str, 16) if isinstance(crc_str, str) else crc_str
+                new_tlvs.append({'type': 0x00, 'index': 0x01, 'value': struct.pack('<I', crc_val)})
+
+        # 2. JSON Tags (0x10)
+        if "json" in data:
+            # Bei leerem JSON-Objekt ("{}") wird kein 0x10 TLV erstellt
+            if data["json"]:
+                json_bytes = json.dumps(data["json"], ensure_ascii=False).encode('utf-8')
+                new_tlvs.append({'type': 0x10, 'index': 0x00, 'value': json_bytes})
+
+        return new_tlvs

webpage/src/components/ConnectButton.svelte

@@ -1,50 +1,143 @@
 <script lang="ts">
   import { onMount } from 'svelte';
+  import { bus } from '../lib/bus/SerialBus';
   import { buzzer } from '../lib/buzzerStore';
-  import { connectToPort, disconnectBuzzer,initSerialListeners } from '../lib/buzzerActions';
+  import { GetProtocolCommand } from '../lib/protocol/commands/GetProtocol';
-  import { PlugsIcon, PlugsConnectedIcon } from 'phosphor-svelte';
+  import { addToast } from '../lib/toastStore';
+  import { 
+    PlugsIcon, 
+    PlugsConnectedIcon, 
+    CaretDownIcon, 
+    BluetoothIcon, 
+    TrashIcon,
+    PlusCircleIcon
+  } from 'phosphor-svelte';
+  import { slide } from 'svelte/transition';
+  import { initializeBuzzer } from '../lib/buzzerActions';
 
-  const BUZZER_FILTER = [
+  const BUZZER_FILTER = [{ usbVendorId: 0x1209, usbProductId: 0xEDED }];
-    { usbVendorId: 0x2fe3, usbProductId: 0x0001 },
-  ];
-  onMount(() => {
-    initSerialListeners();
-  });
   
-  async function handleConnectClick() {
+  let showMenu = false;
-    try {
+  let menuElement: HTMLElement;
-      if ($buzzer.connected) {
-        console.log("Trenne verbindung zum aktuellen Buzzer...");
-        await disconnectBuzzer();
-        console.log("Verbindung getrennt");
-      }
 
-      const port = await navigator.serial.requestPort({ filters: BUZZER_FILTER });
+  // Schließt das Menü bei Klick außerhalb
-      console.log("Port ausgewählt, versuche Verbindung.", port.getInfo());
+  function handleOutsideClick(event: MouseEvent) {
-      await connectToPort(port);
+    if (showMenu && menuElement && !menuElement.contains(event.target as Node)) {
-    } catch (e) {
+      showMenu = false;
-      // Verhindert das Error-Logging, wenn der User einfach nur "Abbrechen" klickt
-      if (e instanceof Error && e.name === 'NotFoundError') {
-        console.log("Keine Verbindung ausgewählt, Abbruch durch Nutzer.");
-        return;
-      }
-      console.error("Verbindung abgebrochen", e);
     }
   }
+
+  async function connectTo(port: SerialPort) {
+    try {
+      await bus.connect(port);
+      // Kurze Pause für die Hardware-Bereitschaft
+      await new Promise(r => setTimeout(r, 100));
+      
+      // Logische Initialisierung starten
+      await initializeBuzzer();
+      
+    } catch (e: any) {
+      console.error("Port-Fehler:", e);
+    }
+  }
+
+  async function handleMainAction() {
+    if ($buzzer.connected) {
+      await bus.disconnect();
+      buzzer.update(s => ({ ...s, connected: false }));
+      return;
+    }
+
+    const ports = await navigator.serial.getPorts();
+    if (ports.length > 0) {
+      await connectTo(ports[0]);
+    } else {
+      await pairNewDevice();
+    }
+  }
+
+  async function pairNewDevice() {
+    showMenu = false;
+    try {
+      const port = await navigator.serial.requestPort({ filters: BUZZER_FILTER });
+      await connectTo(port);
+    } catch (e) {
+      console.log("Pairing abgebrochen");
+    }
+  }
+
+  async function forgetDevice() {
+    showMenu = false;
+    const ports = await navigator.serial.getPorts();
+    for (const port of ports) {
+      if ('forget' in port) {
+        await (port as any).forget();
+      }
+    }
+    if ($buzzer.connected) {
+      await bus.disconnect();
+      buzzer.update(s => ({ ...s, connected: false }));
+    }
+    addToast("Geräte entkoppelt", "info");
+  }
+
+  onMount(() => {
+    window.addEventListener('click', handleOutsideClick);
+    return () => window.removeEventListener('click', handleOutsideClick);
+  });
 </script>
 
-<button 
+<div class="relative inline-flex shadow-lg" bind:this={menuElement}>
-  on:click={handleConnectClick}
+  <button 
-  class="flex items-center gap-2 px-4 py-2 rounded-xl transition-all
+    on:click={handleMainAction}
-  {$buzzer.connected 
+    class="flex items-center gap-3 px-5 py-2.5 rounded-l-xl transition-all border-r border-white/10
-    ? 'bg-emerald-500/20 text-emerald-400 border border-emerald-500/50' 
+    {$buzzer.connected 
-    : 'bg-slate-700 hover:bg-slate-600 text-slate-200 border border-slate-600'}"
+      ? 'bg-emerald-600 hover:bg-emerald-500 text-white' 
->
+      : 'bg-slate-700 hover:bg-slate-600 text-slate-200'}"
-  {#if $buzzer.connected}
+  >
-    <PlugsConnectedIcon size={18} weight="fill" />
+    {#if $buzzer.connected}
-    <span class="text-xs font-bold uppercase tracking-wider text-emerald-300">Verbunden</span>
+      <PlugsConnectedIcon size={20} weight="fill" />
-  {:else}
+      <span class="text-sm font-bold uppercase tracking-wide">Trennen</span>
-    <PlugsIcon size={18} weight="bold" />
+    {:else}
-    <span class="text-xs font-bold uppercase tracking-wider">Verbinden</span>
+      <PlugsIcon size={20} weight="bold" />
+      <span class="text-sm font-bold uppercase tracking-wide">Verbinden</span>
+    {/if}
+  </button>
+
+  <button 
+    on:click={() => showMenu = !showMenu}
+    class="px-3 py-2.5 rounded-r-xl transition-all
+    {$buzzer.connected 
+      ? 'bg-emerald-600 hover:bg-emerald-500 text-white' 
+      : 'bg-slate-700 hover:bg-slate-600 text-slate-200'}"
+  >
+    <CaretDownIcon size={16} weight="bold" class="transition-transform {showMenu ? 'rotate-180' : ''}" />
+  </button>
+
+  {#if showMenu}
+    <div 
+      transition:slide={{ duration: 150 }}
+      class="absolute top-full right-0 mt-2 w-56 bg-slate-800 border border-slate-700 rounded-xl overflow-hidden z-50 shadow-2xl"
+    >
+      <div class="p-2 flex flex-col gap-1">
+        <button 
+          on:click={pairNewDevice}
+          class="flex items-center gap-3 w-full px-3 py-2 text-sm text-slate-300 hover:bg-slate-700 rounded-lg transition-colors"
+        >
+          <PlusCircleIcon size={18} class="text-emerald-400" />
+          Neuen Buzzer koppeln
+        </button>
+        
+        <div class="h-px bg-slate-700 my-1"></div>
+
+        <button 
+          on:click={forgetDevice}
+          class="flex items-center gap-3 w-full px-3 py-2 text-sm text-rose-400 hover:bg-rose-500/10 rounded-lg transition-colors"
+        >
+          <TrashIcon size={18} />
+          Buzzer entkoppeln
+        </button>
+      </div>
+    </div>
   {/if}
-</button>
+</div>

webpage/src/components/DeviceInfo.svelte

@@ -1,17 +1,25 @@
 <script>
   import { buzzer } from '../lib/buzzerStore';
+  import { CpuIcon } from 'phosphor-svelte';
 </script>
-
+<div class="h-48 bg-indigo-950/20 border border-indigo-500/20 rounded-[2rem] p-6 relative overflow-hidden shrink-0">
-<div class="text-[11px] font-mono text-slate-400 space-y-1 relative z-10">
+    <div class="absolute top-6 right-6 text-indigo-500 opacity-20">
-    <p>
+	    <CpuIcon class="w-12 h-12" weight="fill" />
-        Firmware: <span class="text-indigo-300">{$buzzer.version}</span>
+	</div>
-    </p>
+	<h3 class="text-indigo-400 text-[10px] font-black uppercase tracking-[0.2em] mb-4">
-    <p>
+		Device Info
-        Protocol: <span class="text-indigo-300">{$buzzer.protocol}</span>
+	</h3>
-    </p>
+    <div class="text-[11px] font-mono text-slate-400 space-y-1 relative z-10 transition-all duration-300 {!$buzzer.connected ? 'blur-[1px] opacity-30 grayscale pointer-events-none' : ''}">
-    <p>
+        <p>
-        Status: <span class="{$buzzer.connected ? 'text-emerald-400' : 'text-red-400'}">
+            Firmware: <span class="text-indigo-300">{$buzzer.version}</span>
-            {$buzzer.connected ? 'Confirmed' : 'Disconnected'}
+        </p>
-        </span>
+        <p>
-    </p>
+            Protocol: <span class="text-indigo-300">{$buzzer.protocol}</span>
+        </p>
+        <p>
+            Status: <span class="{$buzzer.connected ? 'text-emerald-400' : 'text-red-400'}">
+                {$buzzer.connected ? 'Confirmed' : 'Disconnected'}
+            </span>
+        </p>
+    </div>
 </div> 

webpage/src/components/DiskUsage.svelte

@@ -14,7 +14,7 @@
   $: isDisconnected = !$buzzer.connected;
 </script>
 
-<div class="flex flex-col gap-1.5 w-96 transition-all duration-700 {isDisconnected ? 'blur-sm opacity-30 grayscale pointer-events-none' : ''}">
+<div class="flex flex-col gap-1.5 w-96 transition-all duration-300 {isDisconnected ? 'blur-[1px] opacity-30 grayscale pointer-events-none' : ''}">
   
   <div class="h-3.5 w-full bg-slate-800 rounded-full overflow-hidden flex border border-slate-700 shadow-inner">
       <div class="h-full bg-slate-300 transition-all duration-500" style="width: {pMeta}%"></div>

webpage/src/components/FileRow.svelte

@@ -1,10 +1,31 @@
 <script lang="ts">
   import { buzzer } from '../lib/buzzerStore';
-  import { playFile, deleteFile } from '../lib/buzzerActions';
+  import { InfoIcon, MusicNotesIcon, WrenchIcon, PlayIcon, TrashIcon, ArrowsLeftRightIcon, QuestionMarkIcon } from "phosphor-svelte";
-  import { MusicNotesIcon, WrenchIcon, PlayIcon, TrashIcon, ArrowsLeftRightIcon, QuestionMarkIcon } from "phosphor-svelte";
+  import { PlayFileCommand } from '../lib/protocol/commands/PlayFile';
 
   export let file: { name: string, size: string, isSystem: boolean, crc32?: number};
   export let selected = false;
+
+  async function handlePlay() {
+    try {
+      const cmd = new PlayFileCommand();
+      
+      // 1. WICHTIG: Der Buzzer braucht den absoluten Pfad!
+      const fullPath = `/lfs/a/${file.name}`;
+      
+      console.log("Sende Play-Befehl für:", fullPath);
+      const success = await cmd.execute(fullPath);
+
+      if (success) {
+        // Optional: Erfolg kurz im Log zeigen
+        console.log("Wiedergabe läuft...");
+      } else {
+        addToast(`Buzzer konnte ${file.name} nicht abspielen.`, "error");
+      }
+    } catch (e: any) {
+      addToast(`Fehler: ${e.message}`, "error");
+    }
+  }
 </script>
 
 <div 
@@ -47,18 +68,25 @@
   </div>
   
   <div class="flex gap-1 opacity-0 group-hover:opacity-100 transition-opacity shrink-0 ml-4">
+      <button 
+      class="p-2 hover:bg-gray-500/20 rounded-lg text-white-400 transition-colors"
+      title="Datei-Infos"
+    >
+      <InfoIcon size={16} />
+    </button>
+
     <button 
-      on:click|stopPropagation={() => playFile(file.name)}
+      on:click|stopPropagation={handlePlay}
       class="p-2 hover:bg-blue-500/20 rounded-lg text-blue-400 transition-colors"
-      title="Play Sound"
+      title="Auf dem Buzzer abspielen"
     >
       <PlayIcon size={16} weight="fill" />
     </button>
     
     <button 
-      on:click|stopPropagation={() => deleteFile(file.name)}
+      // on:click|stopPropagation={() => deleteFile(file.name)}
       class="p-2 hover:bg-red-500/20 rounded-lg text-red-400 transition-colors"
-      title="Delete File"
+      title="Datei vom Buzzer löschen"
     >
       <TrashIcon size={16} weight="fill" />
     </button>

webpage/src/components/FileStorage.svelte

@@ -1,11 +1,11 @@
 <script lang="ts">
   import { buzzer } from '../lib/buzzerStore';
-  import { refreshFileList } from '../lib/buzzerActions';
   import FileRow from './FileRow.svelte';
   import { ArrowsCounterClockwiseIcon } from 'phosphor-svelte';
+  import { refreshFileList } from '../lib/buzzerActions';
+
   async function handleRefresh() {
-    console.log("Aktualisiere Dateiliste...");
+      await refreshFileList();
-    await refreshFileList();
   }
 </script>
 

webpage/src/lib/bus/SerialBus.ts

@@ -0,0 +1,134 @@
+import { SYNC_SEQ, FrameType } from '../protocol/constants';
+import { buzzer } from '../buzzerStore';
+
+class SerialBus {
+    public port: SerialPort | null = null;
+    private reader: ReadableStreamDefaultReader<Uint8Array> | null = null;
+    private internalBuffer: Uint8Array = new Uint8Array(0);
+
+    async connect(port: SerialPort) {
+        if (this.port) await this.disconnect();
+        await port.open({ baudRate: 115200 });
+        this.port = port;
+        this.internalBuffer = new Uint8Array(0);
+        this.reader = null;
+        port.addEventListener('disconnect', () => {
+            console.warn("Hardware-Verbindung verloren!");
+            this.disconnect();
+            buzzer.update(s => ({ ...s, connected: false }));
+        });
+        (window as any).buzzerBus = this;
+    }
+
+    // Hilfsmethode: Stellt sicher, dass wir einen aktiven Reader haben ohne zu crashen
+    private async ensureReader() {
+        if (!this.port?.readable) throw new Error("Port nicht lesbar");
+        if (!this.reader) {
+            this.reader = this.port.readable.getReader();
+        }
+    }
+
+    async sendRequest(cmd: number, payload: Uint8Array = new Uint8Array(0)) {
+        if (!this.port?.writable) throw new Error("Port nicht bereit");
+        const writer = this.port.writable.getWriter();
+        const header = new Uint8Array([FrameType.REQUEST, cmd]);
+        const frame = new Uint8Array(SYNC_SEQ.length + header.length + payload.length);
+        frame.set(SYNC_SEQ, 0);
+        frame.set(header, SYNC_SEQ.length);
+        frame.set(payload, SYNC_SEQ.length + header.length);
+        await writer.write(frame);
+        writer.releaseLock();
+    }
+
+    async waitForSync(timeoutMs = 2000): Promise<boolean> {
+        await this.ensureReader();
+        const startTime = Date.now();
+
+        while (Date.now() - startTime < timeoutMs) {
+            // 1. Zuerst im Puffer schauen (verhindert Datenverlust zwischen Frames!)
+            for (let i = 0; i <= this.internalBuffer.length - SYNC_SEQ.length; i++) {
+                if (this.internalBuffer[i] === SYNC_SEQ[0] && this.internalBuffer[i+1] === SYNC_SEQ[1] &&
+                    this.internalBuffer[i+2] === SYNC_SEQ[2] && this.internalBuffer[i+3] === SYNC_SEQ[3]) {
+                    this.internalBuffer = this.internalBuffer.subarray(i + SYNC_SEQ.length);
+                    return true;
+                }
+            }
+
+            // 2. Neue Daten lesen
+            const { value, done } = await this.reader!.read();
+            if (done) break;
+            if (value) {
+                const next = new Uint8Array(this.internalBuffer.length + value.length);
+                next.set(this.internalBuffer);
+                next.set(value, this.internalBuffer.length);
+                this.internalBuffer = next;
+            }
+        }
+        return false;
+    }
+
+    async readExact(len: number): Promise<Uint8Array> {
+        await this.ensureReader();
+        while (this.internalBuffer.length < len) {
+            const { value, done } = await this.reader!.read();
+            if (done || !value) throw new Error("Stream closed");
+            const next = new Uint8Array(this.internalBuffer.length + value.length);
+            next.set(this.internalBuffer);
+            next.set(value, this.internalBuffer.length);
+            this.internalBuffer = next;
+        }
+        const res = this.internalBuffer.subarray(0, len);
+        this.internalBuffer = this.internalBuffer.subarray(len);
+        return res;
+    }
+
+    public releaseReadLock() {
+        if (this.reader) {
+            this.reader.releaseLock();
+            this.reader = null;
+        }
+    }
+
+    async disconnect() {
+        this.releaseReadLock();
+        if (this.port) {
+            try { await this.port.close(); } catch (e) {}
+            this.port = null;
+        }
+        this.internalBuffer = new Uint8Array(0);
+    }
+}
+
+const existingBus = typeof window !== 'undefined' ? (window as any).buzzerBus : null;
+
+export const bus: SerialBus = existingBus || new SerialBus();
+
+if (typeof window !== 'undefined') {
+    (window as any).buzzerBus = bus;
+
+    (window as any).initDebug = async () => {
+        console.log("🚀 Lade Debug-Kommandos...");
+        
+        // Nutze hier am besten absolute Pfade ab /src/
+        const [proto, settings, list, play, flash] = await Promise.all([
+            import('../protocol/commands/GetProtocol.ts'),
+            import('../protocol/commands/GetSettings.ts'),
+            import('../protocol/commands/ListDir.ts'),
+            import('../protocol/commands/PlayFile.ts'), // Pfad prüfen!
+            import('../protocol/commands/GetFlashInfo.ts') // Pfad prüfen!
+        ]);
+
+        (window as any).GetProtocolCommand = proto.GetProtocolCommand;
+        (window as any).GetSettingCommand = settings.GetSettingCommand;
+        (window as any).ListDirCommand = list.ListDirCommand;
+        (window as any).PlayFileCommand = play.PlayFileCommand;
+        (window as any).GetFlashInfoCommand = flash.GetFlashInfoCommand;
+
+        console.log("✅ Alle Commands geladen und an window gebunden.");
+    };
+
+    (window as any).run = async (CommandClass: any, ...args: any[]) => {
+        const cmd = new CommandClass();
+        return await cmd.execute(...args);
+    };
+}

webpage/src/lib/buzzerActions.ts

@@ -1,362 +1,46 @@
-import { buzzer } from './buzzerStore';
-import { get } from 'svelte/store';
-import { addToast } from './toastStore';
-
-let isConnecting = false;
-const delay = (ms: number) => new Promise(resolve => setTimeout(resolve, ms));
-
-type Task = {
-    command: string;
-    priority: number; // 0 = Hintergrund, 1 = User-Aktion
-    resolve: (lines: string[]) => void;
-    key?: string;
-};
-
-class SerialQueue {
-    private queue: Task[] = [];
-    private isProcessing = false;
-    private port: SerialPort | null = null;
-
-    private reader: ReadableStreamDefaultReader<Uint8Array> | null = null;
-    private writer: WritableStreamDefaultWriter<Uint8Array> | null = null;
-
-    setPort(port: SerialPort | null) { this.port = port; }
-
-    async add(command: string, priority = 1, key?: string): Promise<string[]> {
-        if (key) {
-            this.queue = this.queue.filter(t => t.key !== key);
-        }
-
-        return new Promise((resolve) => {
-            const task = { command, priority, resolve, key };
-            if (priority === 1) {
-                const lastUserTaskIndex = this.queue.findLastIndex(t => t.priority === 1);
-                this.queue.splice(lastUserTaskIndex + 1, 0, task);
-            } else {
-                this.queue.push(task);
-            }
-            this.process();
-        });
-    }
-
-    private async process() {
-        if (this.isProcessing || !this.port || this.queue.length === 0) return;
-        this.isProcessing = true;
-
-        const task = this.queue.shift()!;
-        try {
-            const encoder = new TextEncoder();
-            const decoder = new TextDecoder();
-
-            // Reader und Writer in der Instanz speichern
-            this.writer = this.port.writable.getWriter();
-            this.reader = this.port.readable.getReader();
-
-            await this.writer.write(encoder.encode(task.command + "\n"));
-
-            // Writer sofort wieder freigeben nach dem Senden
-            this.writer.releaseLock();
-            this.writer = null;
-
-            let raw = "";
-            while (true) {
-                // Hier könnte die Queue hängen bleiben, wenn das Gerät nicht antwortet
-                const { value, done } = await this.reader.read();
-                if (done) break;
-                raw += decoder.decode(value);
-                if (raw.includes("OK") || raw.includes("ERR")) break;
-            }
-
-            this.reader.releaseLock();
-            this.reader = null;
-
-            const lines = raw.split('\n').map(l => l.trim()).filter(l => l);
-            const errorLine = lines.find(l => l.startsWith("ERR"));
-            if (errorLine) addToast(`Gerätefehler: ${errorLine}`, 'error', 5000);
-
-            task.resolve(lines.filter(l => l !== "OK" && !l.startsWith("ERR") && !l.startsWith(task.command)));
-        } catch (e) {
-            // Im Fehlerfall Locks sicher aufheben
-            this.cleanupLocks();
-            if (e instanceof Error && e.name !== 'AbortError') {
-                console.error("Queue Error:", e);
-            }
-        } finally {
-            this.isProcessing = false;
-            this.process();
-        }
-    }
-
-    // Hilfsmethode zum Aufräumen der Sperren
-    private cleanupLocks() {
-        if (this.reader) {
-            try { this.reader.releaseLock(); } catch { }
-            this.reader = null;
-        }
-        if (this.writer) {
-            try { this.writer.releaseLock(); } catch { }
-            this.writer = null;
-        }
-    }
-
-    async close() {
-        this.queue = [];
-        if (this.port) {
-            try {
-                // Erst die Streams abbrechen, um laufende Reads zu beenden
-                if (this.reader) {
-                    await this.reader.cancel();
-                }
-                if (this.writer) {
-                    await this.writer.abort();
-                }
-                // Dann die Locks freigeben
-                this.cleanupLocks();
-                await this.port.close();
-                // console.log("Port erfolgreich geschlossen");
-            } catch (e) {
-                console.error("Port-Fehler beim Schließen:", e);
-                this.cleanupLocks();
-            }
-            this.port = null;
-        }
-        this.isProcessing = false;
-    }
-}
-
-const queue = new SerialQueue();
-
 /**
- * Initialisiert die globalen Serial-Listener (aufgerufen beim Start der App)
+ * Initialisiert den Buzzer nach dem physikalischen Verbindungsaufbau.
  */
-export function initSerialListeners() {
+export async function initializeBuzzer() {
-    if (typeof navigator === 'undefined' || !navigator.serial) return;
+  try {
+    const version = await new GetProtocolCommand().execute();
     
-    // 1. Wenn ein bereits gekoppeltes Gerät eingesteckt wird
+    if (version !== null) {
-    navigator.serial.addEventListener('connect', (event) => {
+      buzzer.update(s => ({ ...s, connected: true, protocol: version }));
-        // console.log('Neues Gerät erkannt, starte Auto-Connect...');
-        autoConnect();
-    });
       
-    // Beim Laden der Seite prüfen, ob wir bereits Zugriff auf Geräte haben
+      // FIX 1: Flash-Info muss auch beim Start geladen werden!
-    autoConnect();
+      await refreshFileList();
-}
+      await refreshFlashInfo(); 
       
-/**
+      addToast(`Buzzer bereit (v${version})`, 'success');
- * Versucht eine Verbindung zu bereits gekoppelten Geräten herzustellen
+      return true;
- */
-export async function autoConnect() {
-    if (typeof navigator === 'undefined' || !navigator.serial) return;
-
-    const ports = await navigator.serial.getPorts();
-    if (ports.length > 0) {
-        const port = ports[0];
-        const retryDelays = [100, 500];
-
-        // Erster Versuch + 2 Retries = max 3 Versuche
-        for (let i = 0; i <= retryDelays.length; i++) {
-            try {
-                // console.log("Auto-Connect Versuch mit Port:", port.getInfo());
-                await connectToPort(port);
-                return; // Erfolg!
-            } catch (e) {
-                if (i < retryDelays.length) {
-                    // console.log(`Reconnect Versuch ${i + 1} fehlgeschlagen, warte ${retryDelays[i]}ms...`);
-                    await delay(retryDelays[i]);
-                } else {
-                    console.error('Auto-Connect nach Retries endgültig fehlgeschlagen.');
-                }
-            }
-        }
     }
+  } catch (e: any) {
+    console.error("Initialisierung fehlgeschlagen:", e);
+    addToast(`Fehler: ${e.message}`, "error");
+    await bus.disconnect();
+    buzzer.update(s => ({ ...s, connected: false }));
+  }
+  return false;
 }
 
-/**
+export async function refreshFlashInfo() {
- * Kernfunktion für den Verbindungsaufbau
+  try {
- */
+    const flashInfo = await new GetFlashInfoCommand().execute();
-export async function connectToPort(port: SerialPort) {
+    if (flashInfo) {
-    if (isConnecting || get(buzzer).connected) return;
+      const totalSize = (flashInfo.total_size / (1024 * 1024));
-    isConnecting = true;
+      const freeSize = (flashInfo.free_size / (1024 * 1024));
+      const fwSlotSize = (flashInfo.fw_slot_size / 1024);
+      const maxPathLength = flashInfo.max_path_length;
       
-    try {
+      buzzer.update(s => ({ 
-        // console.log("Versuche Verbindung mit Port:", port.getInfo());
-        await port.open({ baudRate: 115200 });
-        await delay(100);
-        setActivePort(port);
-
-        try {
-            // Validierung: Antwortet das Teil auf "info"?
-            const success = await Promise.race([
-                updateDeviceInfo(port),
-                new Promise<boolean>((_, reject) => setTimeout(() => reject(new Error("Timeout")), 1500))
-            ]);
-
-            if (!success) throw new Error("Kein Buzzer");
-
-            port.addEventListener('disconnect', () => {
-                addToast("Buzzer-Verbindung verloren!", "warning");
-                handleDisconnect();
-            });
-
-            buzzer.update(s => ({ ...s, connected: true }));
-            addToast("Buzzer erfolgreich verbunden", "success");
-
-            await refreshFileList();
-        } catch (validationError) {
-            addToast("Buzzer-Validierung fehlgeschlagen!", "error");
-            await disconnectBuzzer();
-
-            try {
-                if ('forget' in port) { // Check für Browser-Support
-                    await (port as any).forget();
-                    console.log("Gerät wurde erfolgreich entkoppelt.");
-                }
-            } catch (forgetError) {
-                console.error("Entkoppeln fehlgeschlagen:", forgetError);
-            }
-
-            throw new Error("Device ist kein gültiger Buzzer");
-            throw validationError; // Fehler an den äußeren Block weitergeben
-        }
-    } catch (e) {
-        setActivePort(null);
-        // Hier landen wir, wenn der User den Port-Dialog abbricht oder die Validierung fehlschlägt
-        throw e;
-    } finally {
-        isConnecting = false;
-    }
-}
-
-function handleDisconnect() {
-    setActivePort(null);
-    buzzer.update(s => ({
         ...s, 
-        connected: false,
+        storage: { total: totalSize, available: freeSize }, // FIX 2: "storage" korrekt geschrieben
-        files: [] // Liste leeren, da Gerät weg
+        fw_slot_size: fwSlotSize, 
-    }));
+        max_path_length: maxPathLength 
-}
+      }));
-
-// --- EXPORTE ---
-
-export function setActivePort(port: SerialPort | null) {
-    queue.setPort(port);
-}
-
-export async function disconnectBuzzer() {
-    await queue.close();
-    handleDisconnect();
-}
-
-export async function updateDeviceInfo(port: SerialPort): Promise<boolean> {
-    const lines = await queue.add("info", 1);
-    if (lines.length > 0) {
-        const parts = lines[0].split(';');
-        if (parts.length >= 6) {
-            const pageSize = parseInt(parts[2]);
-            const totalPages = parseInt(parts[3]);
-            const availablePages = parseInt(parts[4]);
-
-            // MB Berechnung mit dem korrekten Divisor (1024 * 1024)
-            const totalMB = (totalPages * pageSize) / 1048576;
-            const availableMB = (availablePages * pageSize) / 1048576;
-
-            buzzer.update(s => ({
-                ...s,
-                version: parts[1],
-                protocol: parseInt(parts[0]),
-                storage: { ...s.storage, total: totalMB, available: availableMB }
-            }));
-            return true; // Validierung erfolgreich
-        }
     }
-    return false; // Keine gültigen Daten erhalten
+  } catch (e) { // FIX 3: try/catch Block sauber schließen
-}
+    console.error("Fehler beim Abrufen der Flash-Info:", e);
-
+  }
-export async function refreshFileList() {
+} // Funktion schließen
-    let totalSystemBytes = 0;
-    let totalAudioBytes = 0;
-
-    // 1. System-Größe abfragen (nur Summieren, keine Liste speichern)
-    const syslines = await queue.add("ls /lfs/sys", 1, 'ls');
-    syslines.forEach(line => {
-        const parts = line.split(',');
-        if (parts.length >= 2) {
-            totalSystemBytes += parseInt(parts[1]);
-        }
-    });
-
-    // 2. Audio-Files abfragen und Liste für das UI erstellen
-    const lines = await queue.add("ls /lfs/a", 1, 'ls');
-    const audioFiles = lines.map(line => {
-        const parts = line.split(',');
-        if (parts.length < 3) return null;
-        const size = parseInt(parts[1]);
-        totalAudioBytes += size;
-
-        return {
-            name: parts[2],
-            size: (size / 1024).toFixed(1) + " KB",
-            crc32: 0,
-            isSystem: false
-        };
-    }).filter(f => f !== null) as any[];
-
-    // 3. Den Store mit MB-Werten aktualisieren
-    buzzer.update(s => {
-        // Konvertierung in MB (1024 * 1024 = 1048576)
-        const audioMB = totalAudioBytes / 1048576;
-        const sysMB = totalSystemBytes / 1048576;
-        const usedTotalMB = s.storage.total - s.storage.available;
-        const unknownMB = Math.max(0, usedTotalMB - audioMB - sysMB);
-        console.log(`Storage: Total ${s.storage.total} MB, Used ${usedTotalMB.toFixed(2)} MB, Audio ${audioMB.toFixed(2)} MB, System ${sysMB.toFixed(2)} MB, Unknown ${unknownMB.toFixed(2)} MB`);
-        return {
-            ...s,
-            files: audioFiles,
-            storage: {
-                ...s.storage,
-                usedSys: sysMB,
-                usedAudio: audioMB,
-                unknown: unknownMB
-            }
-        };
-    });
-
-    startBackgroundCrcCheck();
-}
-
-async function startBackgroundCrcCheck() {
-    const currentFiles = get(buzzer).files;
-    for (const file of currentFiles) {
-        if (true) {//(!file.crc32) {
-            const tagresponse = await queue.add(`gett /lfs/a/${file.name}`, 0);
-            if (tagresponse.length > 0) {
-                console.log(`Tag für ${file.name}:`, tagresponse[0]);
-            }
-            const response = await queue.add(`check /lfs/a/${file.name}`, 0);
-            if (response.length > 0) {
-                const match = response[0].match(/0x([0-9a-fA-F]+)/);
-                if (match) {
-                    const crc = parseInt(match[1], 16);
-                    updateFileCrc(file.name, crc);
-                }
-            }
-        }
-    }
-}
-
-function updateFileCrc(name: string, crc: number) {
-    buzzer.update(s => ({
-        ...s,
-        files: s.files.map(f => f.name === name ? { ...f, crc32: crc } : f)
-    }));
-}
-
-export async function playFile(filename: string) {
-    return queue.add(`play /lfs/a/${filename}`, 1, 'play');
-}
-
-export async function deleteFile(filename: string) {
-    if (!confirm(`Datei ${filename} wirklich löschen?`)) return;
-    await queue.add(`rm /lfs/a/${filename}`, 1);
-    await refreshFileList();
-}

webpage/src/lib/buzzerStore.ts

@@ -2,15 +2,18 @@ import { writable } from 'svelte/store';
 
 export const buzzer = writable({
   connected: false,
-  version: 'v0.0.0',
   protocol: 0,
-  build: 'unknown',
+  version: 'v0.0.0',
+  kernel_version: 'v0.0.0',
   storage: {
-    total: 8.0,      // 8 MB Flash laut Spezifikation
+    total: 8.0,
     available: 0.0,
-    unknown: 8.0,
     usedSys: 0.0,
-    usedAudio: 0.0
+    usedAudio: 0.0,
+    unknown: 0.0
   },
-  files: [] as {name: string, size: string, crc32: number, isSystem: boolean, isSynced: boolean}[]
+  max_path_length: 15,
+  fw_slot_size: 0,
+  
+  files: [] as {name: string, size: string, crc32: number | null, isSystem: boolean}[]
 });

webpage/src/lib/protocol/commands/GetFlashInfo.ts

@@ -0,0 +1,49 @@
+import { bus } from '../../bus/SerialBus';
+import { Command, FrameType } from '../constants';
+import { BinaryUtils } from '../../utils/BinaryUtils';
+
+export interface FlashInfo {
+    total_size: number;    // in Bytes
+    free_size: number;     // in Bytes
+    fw_slot_size: number; // in Bytes
+    ext_flash_erase_size: number; // in Bytes
+    int_flash_erase_size: number; // in Bytes
+    max_path_length: number;
+}
+
+export class GetFlashInfoCommand {
+    async execute(): Promise<FlashInfo | null> {
+        try {
+            await bus.sendRequest(Command.GET_FLASH_INFO);
+            
+            if (await bus.waitForSync()) {
+                const typeArr = await bus.readExact(1);
+                if (typeArr[0] === FrameType.RESPONSE) {
+                    // Wir lesen exakt 21 Bytes für die Flash-Info
+                    const data = await bus.readExact(21);
+                    const pageSize = BinaryUtils.readUint32LE(data.subarray(0, 4));
+                    const totalSize = BinaryUtils.readUint32LE(data.subarray(4, 8)) * pageSize;
+                    const freeSize = BinaryUtils.readUint32LE(data.subarray(8, 12)) * pageSize; // Aktuell haben wir keine Info über belegten Speicher, also annehmen, dass alles frei ist
+                    const fwSlotSize = BinaryUtils.readUint32LE(data.subarray(12, 16));
+                    const extEraseSize = BinaryUtils.readUint16LE(data.subarray(16, 18));
+                    const intEraseSize = BinaryUtils.readUint16LE(data.subarray(18, 20));
+                    const maxPathLength = data[20];
+                    console.log("Flash Info:", { pageSize, totalSize, freeSize, fwSlotSize, extEraseSize, intEraseSize, maxPathLength });
+                    return {
+                        total_size: totalSize,
+                        free_size: totalSize, // Aktuell haben wir keine Info über belegten Speicher, also annehmen, dass alles frei ist
+                        fw_slot_size: fwSlotSize,
+                        ext_flash_erase_size: extEraseSize,
+                        int_flash_erase_size: intEraseSize,
+                        max_path_length: maxPathLength
+                    };
+                }
+            }
+        } catch (e) {
+            console.error("GetFlashInfoCommand failed:", e);
+        } finally {
+            bus.releaseReadLock();
+        }
+        return null;
+    }
+}

webpage/src/lib/protocol/commands/GetProtocol.ts

@@ -0,0 +1,26 @@
+import { bus } from '../../bus/SerialBus';
+import { Command, FrameType } from '../constants';
+import { BinaryUtils } from '../../utils/BinaryUtils';
+
+export class GetProtocolCommand {
+    async execute(): Promise<number | null> {
+        try {
+            await bus.sendRequest(Command.GET_PROTOCOL_VERSION);
+            
+            if (await bus.waitForSync()) {
+                const typeArr = await bus.readExact(1);
+                if (typeArr[0] === FrameType.RESPONSE) {
+                    // Wir lesen exakt 2 Bytes für die Version
+                    const data = await bus.readExact(2);
+                    // Nutze die neue Hilfsfunktion
+                    return BinaryUtils.readUint16LE(data);
+                }
+            }
+        } catch (e) {
+            console.error("GetProtocolCommand failed:", e);
+        } finally {
+            bus.releaseReadLock();
+        }
+        return null;
+    }
+}

webpage/src/lib/protocol/commands/GetSettings.ts

@@ -0,0 +1,37 @@
+import { bus } from '../../bus/SerialBus';
+import { Command, FrameType } from '../constants';
+import { BinaryUtils } from '../../utils/BinaryUtils';
+
+export class GetSettingCommand {
+    async execute(key: string): Promise<number | boolean | null> {
+        try {
+            const keyBuf = new TextEncoder().encode(key);
+            const payload = new Uint8Array(1 + keyBuf.length);
+            payload[0] = keyBuf.length;
+            payload.set(keyBuf, 1);
+
+            await bus.sendRequest(Command.GET_SETTING, payload);
+            
+            if (await bus.waitForSync()) {
+                const typeArr = await bus.readExact(1);
+                if (typeArr[0] === FrameType.RESPONSE) {
+                    const lenArr = await bus.readExact(1);
+                    const valLen = lenArr[0];
+                    const data = await bus.readExact(valLen);
+
+                    // Typ-Konvertierung analog zu C/Python
+                    if (key === "audio/vol" || key === "play/norepeat") {
+                        return data[0] === 1 ? true : (key === "audio/vol" ? data[0] : false);
+                    } else if (key === "settings/storage_interval") {
+                        return BinaryUtils.readUint16LE(data);
+                    }
+                }
+            }
+        } catch (e) {
+            console.error("GetSetting failed:", e);
+        } finally {
+            bus.releaseReadLock();
+        }
+        return null;
+    }
+}

webpage/src/lib/protocol/commands/ListDir.ts

@@ -0,0 +1,43 @@
+// src/lib/protocol/commands/ListDir.ts
+import { bus } from '../../bus/SerialBus';
+import { Command, FrameType } from '../constants';
+import { BinaryUtils } from '../../utils/BinaryUtils';
+
+export class ListDirCommand {
+    async execute(path: string) {
+        try {
+            const p = new TextEncoder().encode(path);
+            const req = new Uint8Array(p.length + 1);
+            req[0] = p.length; req.set(p, 1);
+            
+            await bus.sendRequest(Command.LIST_DIR, req);
+            const entries = [];
+            
+            while (true) {
+                // Wichtig: Wir rufen waitForSync ohne releaseReadLock zwischendurch auf!
+                if (!(await bus.waitForSync())) break;
+
+                const type = (await bus.readExact(1))[0];
+                if (type === FrameType.LIST_START) continue;
+                if (type === FrameType.LIST_END) {
+                    const expected = BinaryUtils.readUint16LE(await bus.readExact(2));
+                    console.log(`Erwartet: ${expected}, Erhalten: ${entries.length}`);
+                    return entries;
+                }
+                if (type === FrameType.LIST_CHUNK) {
+                    const len = BinaryUtils.readUint16LE(await bus.readExact(2));
+                    const data = await bus.readExact(len);
+                    entries.push({
+                        isDir: data[0] === 1,
+                        size: data[0] === 1 ? null : BinaryUtils.readUint32LE(data.subarray(1, 5)),
+                        name: new TextDecoder().decode(data.subarray(5)).replace(/\0/g, '')
+                    });
+                }
+                if (type === FrameType.ERROR) break;
+            }
+        } finally {
+            bus.releaseReadLock(); // ERST HIER LOCK LÖSEN!
+        }
+        return null;
+    }
+}

webpage/src/lib/protocol/commands/PlayFile.ts

@@ -0,0 +1,31 @@
+import { bus } from '../../bus/SerialBus';
+import { Command, FrameType } from '../constants';
+
+export class PlayFileCommand {
+    async execute(path: string): Promise<boolean | null> {
+        try {
+            const p = new TextEncoder().encode(path);
+            // Wir brauchen: 1 Byte Flags + 1 Byte Länge + Pfad
+            const req = new Uint8Array(p.length + 2);
+            
+            req[0] = 0x01;     // 1. Byte: Flags (LSB: 1 = sofort abspielen)
+            req[1] = p.length; // 2. Byte: Länge für get_path() im C-Code
+            req.set(p, 2);     // Ab 3. Byte: Der Pfad-String
+
+            await bus.sendRequest(Command.PLAY, req);
+            
+            // Warten auf das ACK vom Board
+            if (await bus.waitForSync()) {
+                const typeArr = await bus.readExact(1);
+                if (typeArr[0] === FrameType.ACK) {
+                    return true;
+                } 
+            }
+        } catch (e) {
+            console.error("PlayFileCommand failed:", e);
+        } finally {
+            bus.releaseReadLock();
+        }
+        return null;
+    }
+}

webpage/src/lib/protocol/constants.ts

@@ -0,0 +1,91 @@
+export const SYNC_SEQ = new TextEncoder().encode('BUZZ');
+
+export enum FrameType {
+    REQUEST = 0x01,
+
+    ACK = 0x10,
+    RESPONSE = 0x11,
+    STREAM_START = 0x12,
+    STREAM_CHUNK = 0x13,
+    STREAM_END = 0x14,
+    LIST_START = 0x15,
+    LIST_CHUNK = 0x16,
+    LIST_END = 0x17,
+
+    ERROR = 0xFF,
+}
+
+export enum Command {
+    GET_PROTOCOL_VERSION = 0x00,
+    GET_FIRMWARE_STATUS = 0x01,
+    GET_FLASH_INFO = 0x02,
+    CONFIRM_FIRMWARE = 0x03,
+    REBOOT = 0x04,
+
+    LIST_DIR = 0x10,
+    CRC32 = 0x11,
+    MKDIR = 0x12,
+    RM = 0x13,
+    STAT = 0x18,
+    RENAME = 0x19,
+
+    PUT_FILE = 0x20,
+    PUT_FW = 0x21,
+    GET_FILE = 0x22,
+    PUT_TAGS = 0x24,
+    GET_TAGS = 0x25,
+
+    PLAY = 0x30,
+    STOP = 0x31,
+
+    SET_SETTING = 0x40,
+    GET_SETTING = 0x41,
+}
+
+export const ERRORS: Record<number, string> = {
+    0x00: "NONE",
+    0x01: "INVALID_COMMAND",
+    0x02: "INVALID_PARAMETERS",
+    0x03: "COMMAND_TOO_LONG",
+
+    0x10: "FILE_NOT_FOUND",
+    0x11: "ALREADY_EXISTS",
+    0x12: "NOT_A_DIRECTORY",
+    0x13: "IS_A_DIRECTORY",
+    0x14: "ACCESS_DENIED",
+    0x15: "NO_SPACE",
+    0x16: "FILE_TOO_LARGE",
+
+    0x20: "IO_ERROR",
+    0x21: "TIMEOUT",
+    0x22: "CRC_MISMATCH",
+    0x23: "TRANSFER_ABORTED",
+
+    0x30: "NOT_SUPPORTED",
+    0x31: "BUSY",
+    0x32: "INTERNAL_ERROR",
+};
+
+export enum ErrorCode {
+    P_ERR_NONE = 0x00,
+    P_ERR_INVALID_COMMAND = 0x01,
+    P_ERR_INVALID_PARAMETERS = 0x02,
+    P_ERR_COMMAND_TOO_LONG = 0x03,
+
+    P_ERR_FILE_NOT_FOUND = 0x10,
+    P_ERR_ALREADY_EXISTS = 0x11,
+    P_ERR_NOT_A_DIRECTORY = 0x12,
+    P_ERR_IS_A_DIRECTORY = 0x13,
+    P_ERR_ACCESS_DENIED = 0x14,
+    P_ERR_NO_SPACE = 0x15,
+    P_ERR_FILE_TOO_LARGE = 0x16,
+    
+    P_ERR_IO = 0x20,
+    P_ERR_TIMEOUT = 0x21,
+    P_ERR_CRC_MISMATCH = 0x22,
+    P_ERR_TRANSFER_ABORTED = 0x23,
+
+    P_ERR_NOT_SUPPORTED = 0x30,
+    P_ERR_BUSY = 0x31,
+    P_ERR_INTERNAL = 0x32,
+};

webpage/src/lib/utils/BinaryUtils.ts

@@ -0,0 +1,34 @@
+export class BinaryUtils {
+    /**
+     * Konvertiert 2 Bytes (Little Endian) in eine Zahl (uint16)
+     */
+    static readUint16LE(data: Uint8Array, offset = 0): number {
+        const view = new DataView(data.buffer, data.byteOffset, data.byteLength);
+        return view.getUint16(offset, true); // true = Little Endian
+    }
+
+    /**
+     * Konvertiert 4 Bytes (Little Endian) in eine Zahl (uint32)
+     */
+    static readUint32LE(data: Uint8Array, offset = 0): number {
+        const view = new DataView(data.buffer, data.byteOffset, data.byteLength);
+        return view.getUint32(offset, true);
+    }
+
+    /**
+     * Erstellt ein Uint8Array aus einer Zahl (uint16 LE)
+     */
+    static writeUint16LE(value: number): Uint8Array {
+        const buf = new Uint8Array(2);
+        const view = new DataView(buf.buffer);
+        view.setUint16(0, value, true);
+        return buf;
+    }
+
+    static writeUint32LE(value: number): Uint8Array {
+        const buf = new Uint8Array(4);
+        const view = new DataView(buf.buffer);
+        view.setUint32(0, value, true);
+        return buf;
+    }
+}

webpage/src/pages/index.astro

@@ -67,17 +67,7 @@ import type { loadRenderers } from "astro:container";
 				</section>
 
 				<section class="flex-1 flex flex-col gap-6 min-h-0">
-					<div
+					<DeviceInfo client:load />
-						class="h-48 bg-indigo-950/20 border border-indigo-500/20 rounded-[2rem] p-6 relative overflow-hidden shrink-0">
-						<div class="absolute top-6 right-6 text-indigo-500 opacity-20">
-							<Icon name="ph:cpu-fill" class="w-12 h-12" />
-						</div>
-						<h3 class="text-indigo-400 text-[10px] font-black uppercase tracking-[0.2em] mb-4">
-							Device Info
-						</h3>
-						<DeviceInfo client:load />
-					</div>
-
 					<div class="flex-1 flex flex-col overflow-hidden">
 						<FileStorage client:load />
 					</div>