Bluetooth funktioniert, programming ohne flash erase tut

.vscode/launch.json

@@ -0,0 +1,12 @@
+{
+	"version": "0.2.0",
+	"configurations": [
+		{
+			"type": "nrf-connect",
+			"request": "launch",
+			"name": "Launch firmware/build_nrf52840dk_debug",
+			"config": "${workspaceFolder}/firmware/build_nrf52840dk_debug",
+			"runToEntryPoint": "main"
+		}
+	]
+}

.vscode/settings.json

@@ -6,5 +6,8 @@
     "nrf-connect.boardRoots": [
         "${workspaceFolder}/firmware"
     ],
-    "cmake.sourceDirectory": "C:/Projekte/buzzer_2/firmware/libs/ble_mgmt"
+    "cmake.sourceDirectory": "C:/Projekte/buzzer_2/firmware/libs/ble_mgmt",
+    "nrf-connect.debugging.bindings": {
+        "${workspaceFolder}/firmware/build_nrf52840dk_debug": "Launch firmware/build_nrf52840dk_debug"
+    }
 }

firmware/boards/buzzy_nrf52840.conf

@@ -1,11 +1,2 @@
-### Console / Logging: RTT
-CONFIG_USE_SEGGER_RTT=y
-CONFIG_CONSOLE=y
-CONFIG_RTT_CONSOLE=y
-
-CONFIG_UART_CONSOLE=n
-CONFIG_LOG_BACKEND_UART=n
-CONFIG_LOG_BACKEND_RTT=y
-
 # Keep SPI NOR page layout aligned with generated LittleFS block size (4KB).
 CONFIG_SPI_NOR_FLASH_LAYOUT_PAGE_SIZE=4096

firmware/boards/nrf52840dk_nrf52840.conf

@@ -1,4 +0,0 @@
-### Console / Logging: UART
-CONFIG_UART_CONSOLE=y
-CONFIG_LOG_BACKEND_UART=y
-CONFIG_LOG_BACKEND_RTT=n

firmware/boards/nrf52840dk_nrf52840.overlay

@@ -34,3 +34,16 @@
     pinctrl-1 = <&i2s0_sleep>;
     pinctrl-names = "default", "sleep";
 };
+
+&mx25r64 {
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ext_flash_lfs: partition@0 {
+            label = "ext-littlefs";
+            reg = <0x00000000 DT_SIZE_M(8)>;
+        };
+    };
+};

firmware/debug.conf

@@ -1,8 +1,23 @@
 ### Logging
 CONFIG_LOG=y
-CONFIG_AUDIO_LOG_LEVEL_DBG=y
+CONFIG_LOG_MODE_IMMEDIATE=y
+CONFIG_DEBUG=y
 
 CONFIG_DEBUG_OPTIMIZATIONS=y
 
 CONFIG_INIT_STACKS=y
 CONFIG_THREAD_STACK_INFO=y
+
+### Increase logging thread stack to prevent overflow when shell active
+CONFIG_LOG_PROCESS_THREAD_STACK_SIZE=2048
+CONFIG_LOG_BUFFER_SIZE=4096
+
+### Bluetooth subsystem logging (reduced noise)
+CONFIG_BT_LOG_LEVEL_WRN=y
+
+### Shell features shared by all debug variants
+CONFIG_SHELL=y
+CONFIG_SHELL_LOG_BACKEND=n
+CONFIG_FILE_SYSTEM_SHELL=y
+CONFIG_SHELL_STACK_SIZE=2048
+CONFIG_FILE_SYSTEM_SHELL_LS_SIZE=y

firmware/debug_rtt.conf

@@ -0,0 +1,15 @@
+### Debug transport: RTT
+CONFIG_CONSOLE=y
+CONFIG_USE_SEGGER_RTT=y
+CONFIG_RTT_CONSOLE=y
+CONFIG_LOG_BACKEND_RTT=y
+
+### Shell over RTT
+CONFIG_SHELL_BACKEND_RTT=y
+CONFIG_SHELL_BACKEND_RTT_BUFFER=1
+
+CONFIG_UART_CONSOLE=n
+CONFIG_LOG_BACKEND_UART=n
+
+### RTT Buffer
+CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=8192

firmware/debug_uart.conf

@@ -0,0 +1,10 @@
+### Debug transport: UART
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
+CONFIG_LOG_BACKEND_UART=y
+
+### Shell over UART
+CONFIG_SHELL_BACKEND_SERIAL=y
+
+CONFIG_RTT_CONSOLE=n
+CONFIG_LOG_BACKEND_RTT=n

firmware/fs/build_lfs_audio.py

@@ -244,8 +244,10 @@ def main() -> None:
     if staging_root.exists():
         shutil.rmtree(staging_root)
 
-    out_sys = staging_root / "lfs" / "sys"
+    # The LittleFS partition is mounted at /lfs in firmware, so image root
-    out_a = staging_root / "lfs" / "a"
+    # must contain /sys and /a directly (not /lfs/sys and /lfs/a).
+    out_sys = staging_root / "sys"
+    out_a = staging_root / "a"
     out_sys.mkdir(parents=True, exist_ok=True)
     out_a.mkdir(parents=True, exist_ok=True)
 

firmware/fs/program.bat

@@ -1 +1 @@
-nrfutil device --x-ext-mem-config-file "%~dp0buzzy.json" program --firmware "%~dp0lfs_external_flash.hex" --options verify=VERIFY_READ,reset=RESET_SYSTEM
+nrfutil device --x-ext-mem-config-file "%~dp0buzzy.json" program --firmware "%~dp0lfs_external_flash.hex" --options chip_erase_mode=ERASE_NONE,verify=VERIFY_READ,reset=RESET_SYSTEM,ext_mem_erase_mode=ERASE_RANGES_TOUCHED_BY_FIRMWARE

firmware/fs/program.sh

@@ -1,4 +1,4 @@
 #!/usr/bin/env sh
 SCRIPT_DIR="$(CDPATH= cd -- "$(dirname -- "$0")" && pwd)"
 
-nrfutil device --x-ext-mem-config-file "$SCRIPT_DIR/buzzy.json" program --firmware "$SCRIPT_DIR/lfs_external_flash.hex" --options verify=VERIFY_READ,reset=RESET_SYSTEM
+nrfutil device --x-ext-mem-config-file "$SCRIPT_DIR/buzzy.json" program --firmware "$SCRIPT_DIR/lfs_external_flash.hex" --options chip_erase_mode=ERASE_NONE,verify=VERIFY_READ,reset=RESET_SYSTEM,ext_mem_erase_mode=ERASE_RANGES_TOUCHED_BY_FIRMWARE

firmware/libs/CMakeLists.txt

@@ -1,3 +1,4 @@
+add_subdirectory(settings_mgmt)
 add_subdirectory(fw_mgmt)
 add_subdirectory(fs_mgmt)
 add_subdirectory(ble_mgmt)

firmware/libs/Kconfig

@@ -1,3 +1,4 @@
+rsource "settings_mgmt/Kconfig"
 rsource "fw_mgmt/Kconfig"
 rsource "fs_mgmt/Kconfig"
 rsource "ble_mgmt/Kconfig"

firmware/libs/ble_mgmt/Kconfig

@@ -3,88 +3,39 @@ menuconfig BLE_MGMT
     default n
     select BT
     select BT_PERIPHERAL
-    select BT_LOG_LEVEL_WARN
     select BT_DEVICE_NAME_DYNAMIC
     help
-      Library for initializing and managing Bluetooth functionality.
+      Minimal BLE transport for the buzzer firmware.
 
 if BLE_MGMT
-    config BLE_MGMT_TX_QUEUE_DEPTH
-        int "BLE TX queue depth"
-        default 32
-        help
-          Number of notification payloads that can be queued in the BLE transport.
-
     config BLE_MGMT_DEFAULT_DEVICE_NAME
-        string "Default Bluetooth Device Name"
+        string "Default Bluetooth device name"
         default "Edis Buzzer"
-    config BLE_MGMT_ADV_INT_MIN
-        int "Minimum Advertising Interval (in 0.625 ms units)"
-        default 160
         help
-               Minimal advertising interval. 160 equals to 100ms.
+          Device name used when ble_mgmt_init() is called with a NULL name.
-    config BLE_MGMT_ADV_INT_MAX
-        int "Maximum Advertising Interval (ms)"
-        default 160
-            help
-               Maximal advertising interval. 160 equals to 100ms.
 
-    # Airtime 
-    config BT_CTLR_SDC_MAX_CONN_EVENT_LEN_DEFAULT
-        default 4000000
-    
-    # MTU Setup
-    config BT_BUF_ACL_RX_SIZE
-        default 502
-    config BT_BUF_ACL_TX_SIZE
-        default 502
-    config BT_L2CAP_TX_MTU
-        default 498
-    config BT_CTLR_DATA_LENGTH_MAX
-        default 251
-
-    # Buffers
-    config BT_BUF_ACL_TX_COUNT
-        default 15
-    config BT_L2CAP_TX_BUF_COUNT
-        default 15
-    config BT_CONN_TX_MAX
-        default 15
-    config BT_CTLR_SDC_TX_PACKET_COUNT
-        default 15
-    config BT_CTLR_SDC_RX_PACKET_COUNT
-        default 15
-    config BT_BUF_EVT_RX_COUNT
-        default 16
-    
-    # Callbacks
-    config BT_USER_PHY_UPDATE
-        default y
-    config BT_USER_DATA_LEN_UPDATE
-        default y
-
-    # Automatic updates
-    config BT_AUTO_PHY_UPDATE
-        default y
-    config BT_AUTO_DATA_LEN_UPDATE
-        default y
-    config BT_GAP_AUTO_UPDATE_CONN_PARAMS
-        default y
-
-    # Preferred defaults
-    config BT_PERIPHERAL_PREF_MIN_INT
-        default 6
-    config BT_PERIPHERAL_PREF_MAX_INT
-        default 40
-    config BT_PERIPHERAL_PREF_LATENCY
-        default 0
-    config BT_PERIPHERAL_PREF_TIMEOUT
-        default 400
-
-    # Connections
     config BT_MAX_CONN
         default 2
 
+    # BLE control/data handling runs in BT RX workqueue. Enforce a larger
+    # stack while BLE_MGMT is enabled to avoid overflows on connect/file ops.
+    config BT_RX_STACK_SIZE
+        range 3072 8192
+        default 3072
+
+    # Use larger BLE data path buffers for file transfer use-cases.
+    config BT_L2CAP_TX_MTU
+        default 498
+
+    config BT_BUF_ACL_RX_SIZE
+        default 502
+
+    config BT_BUF_ACL_TX_SIZE
+        default 502
+
+    config BT_CTLR_DATA_LENGTH_MAX
+        default 251
+        
     module = BLE_MGMT
     module-str = ble_mgmt
     source "subsys/logging/Kconfig.template.log_config"

firmware/libs/ble_mgmt/include/ble_mgmt.h

@@ -17,7 +17,8 @@ int ble_mgmt_init(ble_mgmt_rx_cb_t rx_cb, const char *device_name);
  * Sends data to the connected central device via a GATT characteristic.
  * @param data Pointer to the data buffer to send.
  * @param len Length of the data in bytes.
- * @return 0 on success, -EACCES if notifications are not enabled, or a negative error code on failure.
+ * @return 0 on success, -EAGAIN if no ATT link is ready yet, -EACCES if notifications are not enabled,
+ *         or a negative error code on failure.
  */
 int ble_mgmt_send(const uint8_t *data, uint16_t len);
 

firmware/libs/ble_mgmt/src/ble_mgmt.c

@@ -1,14 +1,14 @@
-#include <zephyr/bluetooth/bluetooth.h>
+#include <errno.h>
-#include <zephyr/bluetooth/hci.h>
-#include <zephyr/bluetooth/conn.h>
-#include <zephyr/bluetooth/uuid.h>
-#include <zephyr/bluetooth/gatt.h>
-#include <zephyr/logging/log.h>
-#include <zephyr/bluetooth/gatt.h>
-#include <zephyr/bluetooth/conn.h>
-
 #include <string.h>
 
+#include <zephyr/kernel.h>
+#include <zephyr/bluetooth/bluetooth.h>
+#include <zephyr/bluetooth/conn.h>
+#include <zephyr/bluetooth/gatt.h>
+#include <zephyr/bluetooth/hci.h>
+#include <zephyr/bluetooth/uuid.h>
+#include <zephyr/logging/log.h>
+
 #include "ble_mgmt.h"
 
 LOG_MODULE_REGISTER(ble_mgmt, CONFIG_BLE_MGMT_LOG_LEVEL);
@@ -20,18 +20,24 @@ LOG_MODULE_REGISTER(ble_mgmt, CONFIG_BLE_MGMT_LOG_LEVEL);
 #define BUZZ_TX_UUID_VAL \
     BT_UUID_128_ENCODE(0xe517d988, 0xbab5, 0x4574, 0x8479, 0x97c6cb115ca2)
 
+#define DEFAULT_ATT_MTU 23U
+#define GATT_NOTIFY_OVERHEAD 3U
+#define MAX_ADV_NAME_LEN 29
+
+struct ble_peer {
+    struct bt_conn *conn;
+};
+
 static struct bt_uuid_128 buzz_service_uuid = BT_UUID_INIT_128(BUZZ_SERVICE_UUID_VAL);
 static struct bt_uuid_128 buzz_rx_uuid = BT_UUID_INIT_128(BUZZ_RX_UUID_VAL);
 static struct bt_uuid_128 buzz_tx_uuid = BT_UUID_INIT_128(BUZZ_TX_UUID_VAL);
 
-static ble_mgmt_rx_cb_t app_rx_cb = NULL;
+static ble_mgmt_rx_cb_t app_rx_cb;
-static bool notify_enabled = false;
+static bool ble_ready;
-
+static bool advertising_active;
-static uint16_t current_tx_mtu = 23;
+static uint16_t current_att_mtu = DEFAULT_ATT_MTU;
-static uint16_t current_rx_mtu = 23;
-
-#define MAX_ADV_NAME_LEN 29
 static char current_device_name[MAX_ADV_NAME_LEN + 1];
+static struct ble_peer peers[CONFIG_BT_MAX_CONN];
 
 static const struct bt_data ad[] = {
     BT_DATA_BYTES(BT_DATA_FLAGS, (BT_LE_AD_GENERAL | BT_LE_AD_NO_BREDR)),
@@ -44,38 +50,155 @@ static struct bt_data sd[] = {
 
 static struct bt_le_adv_param adv_param = {
     .id = BT_ID_DEFAULT,
-    .sid = 0,
-    .secondary_max_skip = 0,
     .options = BT_LE_ADV_OPT_CONN,
-    .interval_min = CONFIG_BLE_MGMT_ADV_INT_MIN,
+    .interval_min = BT_GAP_ADV_FAST_INT_MIN_2,
-    .interval_max = CONFIG_BLE_MGMT_ADV_INT_MAX,
+    .interval_max = BT_GAP_ADV_FAST_INT_MAX_2,
-    .peer = NULL,
 };
 
 static void att_mtu_updated(struct bt_conn *conn, uint16_t tx, uint16_t rx)
 {
-    LOG_INF("MTU exchanged: TX %u bytes, RX %u bytes", tx, rx);
+    ARG_UNUSED(conn);
-    current_tx_mtu = tx;
+
-    current_rx_mtu = rx;
+    current_att_mtu = MIN(tx, rx);
+    LOG_INF("ATT MTU updated to %u", current_att_mtu);
+}
+
+static size_t peer_count(void)
+{
+    size_t count = 0;
+
+    for (size_t index = 0; index < ARRAY_SIZE(peers); ++index) {
+        if (peers[index].conn != NULL) {
+            ++count;
+        }
+    }
+
+    return count;
+}
+
+static struct ble_peer *find_peer(struct bt_conn *conn)
+{
+    for (size_t index = 0; index < ARRAY_SIZE(peers); ++index) {
+        if (peers[index].conn == conn) {
+            return &peers[index];
+        }
+    }
+
+    return NULL;
+}
+
+static struct ble_peer *reserve_peer(struct bt_conn *conn)
+{
+    struct ble_peer *peer = find_peer(conn);
+
+    if (peer != NULL) {
+        return peer;
+    }
+
+    for (size_t index = 0; index < ARRAY_SIZE(peers); ++index) {
+        if (peers[index].conn == NULL) {
+            peers[index].conn = bt_conn_ref(conn);
+            return &peers[index];
+        }
+    }
+
+    return NULL;
+}
+
+static void release_peer(struct bt_conn *conn)
+{
+    struct ble_peer *peer = find_peer(conn);
+
+    if (peer == NULL) {
+        return;
+    }
+
+    bt_conn_unref(peer->conn);
+    peer->conn = NULL;
+}
+
+static void set_device_name(const char *name)
+{
+    const char *name_to_use = name != NULL ? name : CONFIG_BLE_MGMT_DEFAULT_DEVICE_NAME;
+
+    strncpy(current_device_name, name_to_use, MAX_ADV_NAME_LEN);
+    current_device_name[MAX_ADV_NAME_LEN] = '\0';
+    sd[0].data_len = strlen(current_device_name);
+
+#ifdef CONFIG_BT_DEVICE_NAME_DYNAMIC
+    if (ble_ready) {
+        (void)bt_set_name(current_device_name);
+    }
+#endif
+}
+
+static int start_advertising(void)
+{
+    int rc;
+
+    if (!ble_ready || peer_count() >= CONFIG_BT_MAX_CONN || advertising_active) {
+        return 0;
+    }
+
+    rc = bt_le_adv_start(&adv_param, ad, ARRAY_SIZE(ad), sd, ARRAY_SIZE(sd));
+    if (rc == -EALREADY) {
+        advertising_active = true;
+        return 0;
+    }
+
+    if (rc != 0) {
+        LOG_ERR("Failed to start advertising (err %d)", rc);
+        return rc;
+    }
+
+    advertising_active = true;
+    LOG_INF("Advertising as %s", current_device_name);
+    return 0;
+}
+
+static int restart_advertising(void)
+{
+    int rc;
+
+    if (!ble_ready) {
+        return -EAGAIN;
+    }
+
+    if (advertising_active) {
+        rc = bt_le_adv_stop();
+        if ((rc != 0) && (rc != -EALREADY)) {
+            LOG_ERR("Failed to stop advertising (err %d)", rc);
+            return rc;
+        }
+
+        advertising_active = false;
+    }
+
+    return start_advertising();
 }
 
 static ssize_t rx_cb(struct bt_conn *conn, const struct bt_gatt_attr *attr,
                      const void *buf, uint16_t len, uint16_t offset, uint8_t flags)
 {
-    LOG_DBG("Received %u bytes", len);
+    ARG_UNUSED(conn);
-    LOG_HEXDUMP_DBG(buf, len, "Data:");
+    ARG_UNUSED(attr);
+    ARG_UNUSED(flags);
 
-    if (app_rx_cb)
+    if (offset != 0U) {
-    {
+        return BT_GATT_ERR(BT_ATT_ERR_INVALID_OFFSET);
+    }
+
+    if (app_rx_cb != NULL) {
         app_rx_cb((const uint8_t *)buf, len);
     }
+
     return len;
 }
 
 static void tx_ccc_cfg_changed(const struct bt_gatt_attr *attr, uint16_t value)
 {
-    notify_enabled = (value == BT_GATT_CCC_NOTIFY);
+    ARG_UNUSED(attr);
-    LOG_INF("Notifications %s", notify_enabled ? "enabled" : "disabled");
+    LOG_INF("Notification state changed: 0x%04x", value);
 }
 
 BT_GATT_SERVICE_DEFINE(ble_mgmt_svc,
@@ -86,177 +209,163 @@ BT_GATT_SERVICE_DEFINE(ble_mgmt_svc,
                            BT_GATT_PERM_NONE, NULL, NULL, NULL),
     BT_GATT_CCC(tx_ccc_cfg_changed, BT_GATT_PERM_READ | BT_GATT_PERM_WRITE));
 
-uint16_t ble_mgmt_get_max_payload(void)
-{
-    /* Kappe die verhandelte MTU auf die hart konfigurierte Zephyr-Puffergrenze */
-    uint16_t effective_mtu = MIN(current_tx_mtu, current_rx_mtu);
-
-#ifdef CONFIG_BT_L2CAP_TX_MTU
-    if (effective_mtu > CONFIG_BT_L2CAP_TX_MTU)
-    {
-        effective_mtu = CONFIG_BT_L2CAP_TX_MTU;
-    }
-#endif
-
-    /* 3 Bytes abziehen für den GATT Notification Overhead */
-    return (effective_mtu > 3) ? (effective_mtu - 3) : 20;
-}
-
-int ble_mgmt_send(const uint8_t *data, uint16_t len)
-{
-    if (!notify_enabled)
-    {
-        return -EACCES;
-    }
-    int rc;
-
-    do
-    {
-        rc = bt_gatt_notify(NULL, &ble_mgmt_svc.attrs[4], data, len);
-        if (rc == -ENOMEM)
-        {
-            k_sleep(K_MSEC(5)); // Thread pausieren, bis TX-Buffer frei wird
-        }
-    } while (rc == -ENOMEM);
-
-    if (rc)
-    {
-        LOG_ERR("Failed to send notification (err %d)", rc);
-        return rc;
-    }
-    return rc;
-}
-
-/* Interne Hilfsfunktion zur Zuweisung des Namens */
-static void set_device_name(const char *name)
-{
-    if (!name)
-    {
-        return;
-    }
-
-    strncpy(current_device_name, name, MAX_ADV_NAME_LEN);
-    current_device_name[MAX_ADV_NAME_LEN] = '\0';
-
-    /* Längen-Update im Scan-Response Array */
-    sd[0].data_len = strlen(current_device_name);
-
-#ifdef CONFIG_BT_DEVICE_NAME_DYNAMIC
-    /* Setzt den Namen parallel im Zephyr GAP-Service (wichtig für macOS) */
-    bt_set_name(current_device_name);
-#endif
-}
-
-int ble_mgmt_update_adv_name(const char *new_name)
-{
-    int rc;
-
-    bt_le_adv_stop();
-    set_device_name(new_name);
-
-    rc = bt_le_adv_start(&adv_param, ad, ARRAY_SIZE(ad), sd, ARRAY_SIZE(sd));
-    if (rc)
-    {
-        LOG_ERR("Advertising failed to restart after name update (err %d)", rc);
-        return rc;
-    }
-
-    LOG_INF("Advertising updated. New Name: %s", current_device_name);
-    return 0;
-}
-
 static void connected(struct bt_conn *conn, uint8_t err)
 {
-    if (err)
+    char addr_str[BT_ADDR_LE_STR_LEN];
-    {
+    struct bt_conn_info info;
+    int rc;
+
+    if (err != 0U) {
         LOG_ERR("Connection failed (err 0x%02x)", err);
         return;
     }
 
-    char addr_str[BT_ADDR_LE_STR_LEN];
+    advertising_active = false;
-    struct bt_conn_info info;
 
-    int rc = bt_conn_get_info(conn, &info);
+    if (reserve_peer(conn) == NULL) {
-    if (rc == 0)
+        LOG_ERR("No free BLE peer slot available");
-    {
+        return;
-        bt_addr_le_to_str(info.le.dst, addr_str, sizeof(addr_str));
-        LOG_INF("Connected to %s", addr_str);
-        LOG_INF("Role: %s", info.role == BT_CONN_ROLE_CENTRAL ? "Central" : "Peripheral");
     }
-    else
+
-    {
+    rc = bt_conn_get_info(conn, &info);
-        LOG_INF("Connected (info retrieval failed)");
+    if ((rc == 0) && (info.type == BT_CONN_TYPE_LE)) {
+        bt_addr_le_to_str(info.le.dst, addr_str, sizeof(addr_str));
+        LOG_INF("Connected to %s (%u/%u)", addr_str, (unsigned int)peer_count(),
+                CONFIG_BT_MAX_CONN);
+    } else {
+        LOG_INF("Connected (%u/%u)", (unsigned int)peer_count(), CONFIG_BT_MAX_CONN);
+    }
+
+    if (peer_count() < CONFIG_BT_MAX_CONN) {
+        (void)start_advertising();
     }
 }
 
 static void disconnected(struct bt_conn *conn, uint8_t reason)
 {
-    LOG_INF("Disconnected (reason 0x%02x)", reason);
+    release_peer(conn);
+    advertising_active = false;
 
-    /* Startet Advertising mit dem global definierten Setup neu */
+    LOG_INF("Disconnected (reason 0x%02x, %u/%u active)", reason,
-    int rc = bt_le_adv_start(&adv_param, ad, ARRAY_SIZE(ad), sd, ARRAY_SIZE(sd));
+            (unsigned int)peer_count(), CONFIG_BT_MAX_CONN);
-    if (rc)
-    {
-        LOG_ERR("Advertising failed to restart (err %d)", rc);
-    }
-    else
-    {
-        LOG_INF("Advertising successfully restarted");
-    }
-}
 
-static void le_phy_updated(struct bt_conn *conn, struct bt_conn_le_phy_info *param)
+    if (peer_count() < CONFIG_BT_MAX_CONN) {
-{
+        (void)start_advertising();
-    const char *tx_phy_str = (param->tx_phy == BT_GAP_LE_PHY_2M) ? "2M" : (param->tx_phy == BT_GAP_LE_PHY_1M) ? "1M" : "Coded/Unknown";
-    const char *rx_phy_str = (param->rx_phy == BT_GAP_LE_PHY_2M) ? "2M" : (param->rx_phy == BT_GAP_LE_PHY_1M) ? "1M" : "Coded/Unknown";
-
-    LOG_INF("LE PHY updated: TX PHY %s, RX PHY %s", tx_phy_str, rx_phy_str);
     }
-
-static void le_param_updated(struct bt_conn *conn, uint16_t interval,
-                             uint16_t latency, uint16_t timeout)
-{
-    LOG_INF("Connection parameters updated: Interval: %u, Latency: %u, Timeout: %u",
-            interval, latency, timeout);
 }
 
 BT_CONN_CB_DEFINE(conn_callbacks) = {
     .connected = connected,
     .disconnected = disconnected,
-    .le_param_updated = le_param_updated,
-    .le_phy_updated = le_phy_updated,
 };
 
+uint16_t ble_mgmt_get_max_payload(void)
+{
+    uint16_t mtu = current_att_mtu;
+
+#ifdef CONFIG_BT_L2CAP_TX_MTU
+    if (mtu > CONFIG_BT_L2CAP_TX_MTU) {
+        mtu = CONFIG_BT_L2CAP_TX_MTU;
+    }
+#endif
+
+    return (mtu > GATT_NOTIFY_OVERHEAD) ? (mtu - GATT_NOTIFY_OVERHEAD) : 20U;
+}
+
+int ble_mgmt_send(const uint8_t *data, uint16_t len)
+{
+    bool any_subscriber = false;
+    bool any_link_present = false;
+    int last_error = 0;
+
+    ARG_UNUSED(data);
+    ARG_UNUSED(len);
+
+    for (size_t index = 0; index < ARRAY_SIZE(peers); ++index) {
+        int rc;
+
+        if (peers[index].conn == NULL) {
+            continue;
+        }
+
+        any_link_present = true;
+
+        if (!bt_gatt_is_subscribed(peers[index].conn, &ble_mgmt_svc.attrs[4],
+                                   BT_GATT_CCC_NOTIFY)) {
+            continue;
+        }
+
+        any_subscriber = true;
+
+        do {
+            rc = bt_gatt_notify(peers[index].conn, &ble_mgmt_svc.attrs[4], data, len);
+            if (rc == -ENOMEM) {
+                k_sleep(K_MSEC(5));
+            }
+        } while (rc == -ENOMEM);
+
+        if (rc != 0) {
+            LOG_ERR("Failed to send notification (err %d)", rc);
+            last_error = rc;
+        }
+    }
+
+    if (!any_link_present || current_att_mtu <= DEFAULT_ATT_MTU) {
+        LOG_DBG("TX deferred: ATT not ready (links=%u, mtu=%u)",
+                (unsigned int)peer_count(), current_att_mtu);
+        return -EAGAIN;
+    }
+
+    if (!any_subscriber) {
+        LOG_DBG("TX blocked: no peer subscribed for notifications");
+        return -EACCES;
+    }
+
+    return last_error;
+}
+
+int ble_mgmt_update_adv_name(const char *new_name)
+{
+    set_device_name(new_name);
+
+    if (peer_count() >= CONFIG_BT_MAX_CONN && !advertising_active) {
+        return 0;
+    }
+
+    return restart_advertising();
+}
+
 int ble_mgmt_init(ble_mgmt_rx_cb_t rx_cb, const char *device_name)
 {
     int rc;
-    app_rx_cb = rx_cb;
-
     static struct bt_gatt_cb gatt_callbacks = {
         .att_mtu_updated = att_mtu_updated,
     };
 
-    bt_gatt_cb_register(&gatt_callbacks);
+    LOG_INF("ble_mgmt_init: starting");
+    app_rx_cb = rx_cb;
+    current_att_mtu = DEFAULT_ATT_MTU;
 
+    LOG_INF("ble_mgmt_init: calling bt_enable");
     rc = bt_enable(NULL);
-    if (rc)
+    if (rc != 0) {
-    {
         LOG_ERR("Bluetooth init failed (err %d)", rc);
         return rc;
     }
 
-    const char *name_to_use = (device_name != NULL) ? device_name : CONFIG_BLE_MGMT_DEFAULT_DEVICE_NAME;
+    LOG_INF("ble_mgmt_init: bt_enable done, marking ready");
-    LOG_INF("BLE init: set_device_name");
+    ble_ready = true;
-    set_device_name(name_to_use);
+    bt_gatt_cb_register(&gatt_callbacks);
+    advertising_active = false;
+    set_device_name(device_name);
 
-    LOG_INF("BLE init: bt_le_adv_start");
+    LOG_INF("ble_mgmt_init: calling start_advertising");
-    rc = bt_le_adv_start(&adv_param, ad, ARRAY_SIZE(ad), sd, ARRAY_SIZE(sd));
+    rc = start_advertising();
-    if (rc)
+    if (rc != 0) {
-    {
+        LOG_ERR("start_advertising failed (err %d)", rc);
-        LOG_ERR("Advertising failed to start (err %d)", rc);
         return rc;
     }
 
-    LOG_INF("Bluetooth initialized. Adv-Name: %s", current_device_name);
+    LOG_INF("ble_mgmt_init: complete");
     return 0;
 }

firmware/libs/fs_mgmt/src/fs_mgmt.c

@@ -12,13 +12,16 @@
 
 LOG_MODULE_REGISTER(fs_mgmt, CONFIG_FS_MGMT_LOG_LEVEL);
 
-/* Prefer external LittleFS partition when present, otherwise internal storage partition. */
+/*
-#if DT_NODE_EXISTS(DT_NODELABEL(ext_flash_lfs))
+ * Under sysbuild, Partition Manager generates PM_<name>_ID symbols.
+ * Without PM, we fall back to the DTS node label.
+ */
+#if defined(PM_littlefs_storage_ID)
+#define FS_PARTITION_ID PM_littlefs_storage_ID
+#elif DT_NODE_EXISTS(DT_NODELABEL(ext_flash_lfs))
 #define FS_PARTITION_ID FIXED_PARTITION_ID(ext_flash_lfs)
-#elif DT_NODE_EXISTS(DT_NODELABEL(storage_partition))
-#define FS_PARTITION_ID FIXED_PARTITION_ID(storage_partition)
 #else
-#error "No compatible LittleFS partition node label found (expected ext_flash_lfs or storage_partition)"
+#error "No compatible LittleFS partition found (expected PM littlefs_storage or DTS ext_flash_lfs)"
 #endif
 FS_LITTLEFS_DECLARE_DEFAULT_CONFIG(fs_storage_data);
 
@@ -35,8 +38,10 @@ static struct fs_mount_t fs_storage_mnt = {
     .mnt_point = CONFIG_FS_MGMT_MOUNT_POINT,
 };
 
+#if defined(CONFIG_PM_DEVICE) && !defined(CONFIG_FILE_SYSTEM_SHELL)
 static int open_count = 0;
 static struct k_mutex flash_pm_lock;
+#endif
 
 // #define ACK_WATERMARK (CONFIG_BUZZ_PROTO_SLAB_COUNT / 4)
 #define INITIAL_CREDITS CONFIG_BUZZ_PROTO_SLAB_COUNT
@@ -76,7 +81,9 @@ static struct
  */
 static int fs_mgmt_pm_flash_suspend(void)
 {
-#if IS_ENABLED(CONFIG_PM_DEVICE)
+#if defined(CONFIG_FILE_SYSTEM_SHELL)
+    return 0;
+#elif defined(CONFIG_PM_DEVICE)
     if (!device_is_ready(flash_dev))
     {
         return -ENODEV;
@@ -102,7 +109,7 @@ static int fs_mgmt_pm_flash_suspend(void)
     }
 
     k_mutex_unlock(&flash_pm_lock);
-#endif /* CONFIG_PM_DEVICE */
+#endif /* CONFIG_FILE_SYSTEM_SHELL / CONFIG_PM_DEVICE */
     return 0;
 }
 
@@ -113,7 +120,9 @@ static int fs_mgmt_pm_flash_suspend(void)
  */
 static int fs_mgmt_pm_flash_resume(void)
 {
-#if IS_ENABLED(CONFIG_PM_DEVICE)
+#if defined(CONFIG_FILE_SYSTEM_SHELL)
+    return 0;
+#elif defined(CONFIG_PM_DEVICE)
     if (!device_is_ready(flash_dev))
         return -ENODEV;
 
@@ -131,7 +140,7 @@ static int fs_mgmt_pm_flash_resume(void)
     open_count++;
 
     k_mutex_unlock(&flash_pm_lock);
-#endif /* CONFIG_PM_DEVICE */
+#endif /* CONFIG_FILE_SYSTEM_SHELL / CONFIG_PM_DEVICE */
     return 0;
 }
 
@@ -179,6 +188,20 @@ int fs_mgmt_pm_unlink(const char *path)
 {
     LOG_DBG("PM Unlinking file '%s'", path);
     fs_mgmt_pm_flash_resume();
+
+    struct fs_dirent entry;
+    int stat_rc = fs_stat(path, &entry);
+    if (stat_rc == -ENOENT)
+    {
+        fs_mgmt_pm_flash_suspend();
+        return 0;
+    }
+    if (stat_rc < 0)
+    {
+        fs_mgmt_pm_flash_suspend();
+        return stat_rc;
+    }
+
     int rc = fs_unlink(path);
     fs_mgmt_pm_flash_suspend();
     return rc;
@@ -397,7 +420,9 @@ int fs_mgmt_pm_mkdir_recursive(char *path)
 
 static int fs_mgmt_init(void)
 {
+#if defined(CONFIG_PM_DEVICE) && !defined(CONFIG_FILE_SYSTEM_SHELL)
     k_mutex_init(&flash_pm_lock);
+#endif
 
     if (!device_is_ready(flash_dev))
     {

firmware/libs/settings_mgmt/CMakeLists.txt

@@ -0,0 +1,5 @@
+if(CONFIG_SETTINGS_MGMT)
+  zephyr_library()
+  zephyr_library_sources(src/settings_mgmt.c)
+  zephyr_include_directories(include)
+endif()

firmware/libs/settings_mgmt/Kconfig

@@ -0,0 +1,14 @@
+menuconfig SETTINGS_MGMT
+    bool "Settings Management"
+    default y
+    select SETTINGS
+    select ZMS
+    help
+      Library for initializing and managing the settings subsystem.
+      ZMS (Zephyr Memory Storage) backend is automatically selected when ZMS is enabled.
+
+if SETTINGS_MGMT
+    module = SETTINGS_MGMT
+    module-str = settings_mgmt
+    source "subsys/logging/Kconfig.template.log_config"
+endif # SETTINGS_MGMT

firmware/libs/settings_mgmt/include/settings_mgmt.h

@@ -0,0 +1,34 @@
+#ifndef SETTINGS_MGMT_H
+#define SETTINGS_MGMT_H
+
+#include <zephyr/types.h>
+
+struct app_settings_t {
+    /* System */
+    char dev_name[33];
+    
+    /* Audio */
+    uint8_t vol;
+    uint8_t shuffle_mode; /* 0: Rnd, 1: No-Rep */
+
+    /* BLE */
+    uint32_t ble_timeout;  /* Seconds, 0xFFFFFFFF = forever */
+    uint16_t ble_interval; /* Milliseconds */
+
+    /* Power & Calibration */
+    uint8_t chg_mode;      /* 0: 500mA, 1: 1A, 2: Auto */
+    uint16_t off_threshold;/* mV */
+    int16_t adc_gain;
+    int16_t adc_offset;
+};
+
+/* Global access to the current runtime configuration */
+extern struct app_settings_t app_cfg;
+
+/* Initializes the settings subsystem and loads values from flash */
+int settings_mgmt_init(void);
+
+/* Sets a setting via string path (for your protocol) */
+int settings_mgmt_set_by_path(const char *path, const void *value, size_t len);
+
+#endif

firmware/libs/settings_mgmt/src/settings_mgmt.c

@@ -0,0 +1,239 @@
+#include <zephyr/settings/settings.h>
+#include <zephyr/logging/log.h>
+#include <errno.h>
+#include <stdio.h>
+#include <string.h>
+#include "settings_mgmt.h"
+
+LOG_MODULE_REGISTER(settings_mgmt, LOG_LEVEL_INF);
+
+/* Sanity check limits */
+#define VOL_MIN                 0
+#define VOL_MAX                 100
+#define SHUFFLE_MODE_MIN        0
+#define SHUFFLE_MODE_MAX        1
+#define BLE_TIMEOUT_MIN         1000
+#define BLE_TIMEOUT_MAX         0xFFFFFFFF
+#define BLE_INTERVAL_MIN        10
+#define BLE_INTERVAL_MAX        10000
+#define CHG_MODE_MIN            0
+#define CHG_MODE_MAX            2
+#define OFF_THRESHOLD_MIN       2900  /* mV, LiPo cut-off */
+#define OFF_THRESHOLD_MAX       3500  /* mV, LiPo nominal */
+#define ADC_GAIN_MIN            -100
+#define ADC_GAIN_MAX            100
+#define ADC_OFFSET_MIN          -1000
+#define ADC_OFFSET_MAX          1000
+
+/* The "Source of Truth" in RAM */
+struct app_settings_t app_cfg = {
+    .dev_name = "Edis Buzzer",
+    .vol = 100,               /* 0-100 % */
+    .shuffle_mode = 0,
+    .ble_timeout = 0xFFFFFFFF,
+    .ble_interval = 100,
+    .chg_mode = 2,            /* Auto */
+    .off_threshold = 3000,    /* mV */
+    .adc_gain = 0,
+    .adc_offset = 0,
+};
+
+static int read_exact(settings_read_cb read_cb, void *cb_arg,
+                      void *dst, size_t expected_len)
+{
+    int rc = read_cb(cb_arg, dst, expected_len);
+
+    if (rc < 0) {
+        return rc;
+    }
+
+    if ((size_t)rc != expected_len) {
+        return -EINVAL;
+    }
+
+    return 0;
+}
+
+/* Sanity check helpers */
+static int check_uint8_range(uint8_t val, uint8_t min, uint8_t max,
+                              const char *name)
+{
+    if (val < min || val > max) {
+        LOG_WRN("%s out of range: %u (valid: %u-%u)", name, val, min, max);
+        return -EINVAL;
+    }
+    return 0;
+}
+
+static int check_uint16_range(uint16_t val, uint16_t min, uint16_t max,
+                               const char *name)
+{
+    if (val < min || val > max) {
+        LOG_WRN("%s out of range: %u (valid: %u-%u)", name, val, min, max);
+        return -EINVAL;
+    }
+    return 0;
+}
+
+static int check_uint32_range(uint32_t val, uint32_t min, uint32_t max,
+                               const char *name)
+{
+    if (val < min || val > max) {
+        LOG_WRN("%s out of range: %u (valid: %u-%u)", name, val, min, max);
+        return -EINVAL;
+    }
+    return 0;
+}
+
+static int check_int16_range(int16_t val, int16_t min, int16_t max,
+                              const char *name)
+{
+    if (val < min || val > max) {
+        LOG_WRN("%s out of range: %d (valid: %d-%d)", name, val, min, max);
+        return -EINVAL;
+    }
+    return 0;
+}
+
+/* Callback: Called by settings_load() or settings_runtime_set() */
+static int buzzy_settings_set(const char *name, size_t len,
+                             settings_read_cb read_cb, void *cb_arg)
+{
+    const char *next;
+    int rc;
+
+    /* Path matching: "buzzy/sys/name" -> name is "sys/name" here */
+    if (settings_name_steq(name, "sys/name", &next) && !next) {
+        rc = read_cb(cb_arg, app_cfg.dev_name, sizeof(app_cfg.dev_name) - 1);
+        if (rc >= 0) app_cfg.dev_name[rc] = '\0';
+        return 0;
+    }
+
+    if (settings_name_steq(name, "audio/vol", &next) && !next) {
+        uint8_t vol;
+        rc = read_exact(read_cb, cb_arg, &vol, sizeof(vol));
+        if (rc == 0) {
+            rc = check_uint8_range(vol, VOL_MIN, VOL_MAX, "audio/vol");
+            if (rc == 0) {
+                app_cfg.vol = vol;
+            }
+        }
+        return rc;
+    }
+
+    if ((settings_name_steq(name, "audio/shuffle", &next) ||
+         settings_name_steq(name, "audio/shuffle_mode", &next)) && !next) {
+        uint8_t shuffle;
+        rc = read_exact(read_cb, cb_arg, &shuffle, sizeof(shuffle));
+        if (rc == 0) {
+            rc = check_uint8_range(shuffle, SHUFFLE_MODE_MIN, SHUFFLE_MODE_MAX, "shuffle_mode");
+            if (rc == 0) {
+                app_cfg.shuffle_mode = shuffle;
+            }
+        }
+        return rc;
+    }
+
+    if (settings_name_steq(name, "ble/to", &next) && !next) {
+        uint32_t timeout;
+        rc = read_exact(read_cb, cb_arg, &timeout, sizeof(timeout));
+        if (rc == 0) {
+            rc = check_uint32_range(timeout, BLE_TIMEOUT_MIN, BLE_TIMEOUT_MAX, "ble/to");
+            if (rc == 0) {
+                app_cfg.ble_timeout = timeout;
+            }
+        }
+        return rc;
+    }
+
+    if ((settings_name_steq(name, "ble/interval", &next) ||
+         settings_name_steq(name, "ble/int", &next)) && !next) {
+        uint16_t interval;
+        rc = read_exact(read_cb, cb_arg, &interval, sizeof(interval));
+        if (rc == 0) {
+            rc = check_uint16_range(interval, BLE_INTERVAL_MIN, BLE_INTERVAL_MAX, "ble/interval");
+            if (rc == 0) {
+                app_cfg.ble_interval = interval;
+            }
+        }
+        return rc;
+    }
+
+    if ((settings_name_steq(name, "power/chg_mode", &next) ||
+         settings_name_steq(name, "sys/chg_mode", &next)) && !next) {
+        uint8_t chg_mode;
+        rc = read_exact(read_cb, cb_arg, &chg_mode, sizeof(chg_mode));
+        if (rc == 0) {
+            rc = check_uint8_range(chg_mode, CHG_MODE_MIN, CHG_MODE_MAX, "chg_mode");
+            if (rc == 0) {
+                app_cfg.chg_mode = chg_mode;
+            }
+        }
+        return rc;
+    }
+
+    if ((settings_name_steq(name, "power/off_threshold", &next) ||
+         settings_name_steq(name, "sys/off_threshold", &next)) && !next) {
+        uint16_t threshold;
+        rc = read_exact(read_cb, cb_arg, &threshold, sizeof(threshold));
+        if (rc == 0) {
+            rc = check_uint16_range(threshold, OFF_THRESHOLD_MIN, OFF_THRESHOLD_MAX, "off_threshold [mV]");
+            if (rc == 0) {
+                app_cfg.off_threshold = threshold;
+            }
+        }
+        return rc;
+    }
+
+    if (settings_name_steq(name, "adc/gain", &next) && !next) {
+        int16_t gain;
+        rc = read_exact(read_cb, cb_arg, &gain, sizeof(gain));
+        if (rc == 0) {
+            rc = check_int16_range(gain, ADC_GAIN_MIN, ADC_GAIN_MAX, "adc/gain");
+            if (rc == 0) {
+                app_cfg.adc_gain = gain;
+            }
+        }
+        return rc;
+    }
+
+    if (settings_name_steq(name, "adc/offset", &next) && !next) {
+        int16_t offset;
+        rc = read_exact(read_cb, cb_arg, &offset, sizeof(offset));
+        if (rc == 0) {
+            rc = check_int16_range(offset, ADC_OFFSET_MIN, ADC_OFFSET_MAX, "adc/offset");
+            if (rc == 0) {
+                app_cfg.adc_offset = offset;
+            }
+        }
+        return rc;
+    }
+
+    return -ENOENT;
+}
+
+struct settings_handler buzzy_handler = {
+    .name = "buzzy",
+    .h_set = buzzy_settings_set
+};
+
+int settings_mgmt_set_by_path(const char *path, const void *value, size_t len)
+{
+    char full_path[64];
+    snprintf(full_path, sizeof(full_path), "buzzy/%s", path);
+    
+    /* Schreibt in ZMS UND triggert buzzy_settings_set zur RAM-Aktualisierung */
+    return settings_runtime_set(full_path, value, len);
+}
+
+int settings_mgmt_init(void)
+{
+    int rc = settings_subsys_init();
+    if (rc) return rc;
+
+    rc = settings_register(&buzzy_handler);
+    if (rc) return rc;
+
+    /* Lädt alle gespeicherten Werte aus dem ZMS in die app_cfg Struktur */
+    return settings_load();
+}

firmware/pm_static.yml

@@ -1,4 +1,39 @@
-# External Flash
+# Static Partition Manager layout for sysbuild builds.
+# Keep this aligned with boards/iten/buzzy/buzzy.dts internal flash partitions.
+
+mcuboot:
+  address: 0x0
+  size: 0xC000
+  region: flash_primary
+
+mcuboot_pad:
+  address: 0xC000
+  size: 0x200
+  region: flash_primary
+
+app:
+  address: 0xC200
+  size: 0x75E00
+  region: flash_primary
+
+mcuboot_primary:
+  address: 0xC000
+  size: 0x76000
+  region: flash_primary
+  span: [mcuboot_pad, app]
+
+mcuboot_secondary:
+  address: 0x82000
+  size: 0x76000
+  region: flash_primary
+
+# Internal flash tail partition (8 x 4 KiB pages) for ZMS/settings-style usage.
+storage:
+  address: 0xF8000
+  size: 0x8000
+  region: flash_primary
+
+# External flash LittleFS image area.
 littlefs_storage:
   address: 0x0
   size: 0x800000

firmware/pm_static_nrf52840dk_nrf52840.yml

@@ -1,39 +0,0 @@
-# mcuboot:
-#   address: 0x0
-#   size: 0xC000
-#   region: flash_primary
-
-# # Primary Slot: Start bleibt 0xC000, Größe 200KB (0x32000)
-# mcuboot_primary:
-#   address: 0xC000
-#   size: 0x32000
-#   region: flash_primary
-
-# mcuboot_pad:
-#   address: 0xC000
-#   size: 0x200
-#   region: flash_primary
-
-# # Die App startet nach dem Padding des Primary Slots
-# app:
-#   address: 0xC200
-#   size: 0x31E00  # (0x32000 - 0x200)
-#   region: flash_primary
-
-# # Secondary Slot: Startet jetzt bei 0xC000 + 0x32000 = 0x3E000
-# mcuboot_secondary:
-#   address: 0x3E000
-#   size: 0x32000
-#   region: flash_primary
-
-# # NVS storage am Ende des Flashs, 16KB (0x4000)
-# settings_storage:
-#   address: 0xFC000
-#   size: 0x4000
-#   region: flash_primary
-
-# External Flash
-littlefs_storage:
-  address: 0x0
-  size: 0x800000  # 8MB
-  region: external_flash

firmware/prj.conf

@@ -1,6 +1,9 @@
 ### Bluetooth
 CONFIG_BLE_MGMT=y
 
+### Audio
+CONFIG_BUZZ_AUDIO=n
+
 ### Error handling
 CONFIG_HW_STACK_PROTECTION=y
 CONFIG_RESET_ON_FATAL_ERROR=y
@@ -10,3 +13,4 @@ CONFIG_PM_DEVICE=y
 
 ### Stack
 CONFIG_MAIN_STACK_SIZE=2048
+CONFIG_BT_RX_STACK_SIZE=4096

firmware/src/main.c

@@ -2,9 +2,8 @@
 #include <zephyr/logging/log.h>
 #include <string.h>
 
-#include "fs_mgmt.h"
 #include "buzz_proto.h"
-#include "fw_mgmt.h"
+// #include "fw_mgmt.h"
 // #include "audio.h"
 
 LOG_MODULE_REGISTER(main);

webpage/src/lib/protocol/parser.ts

@@ -287,7 +287,14 @@ export function parseIncomingFrame(view: DataView, sender: FrameSender) {
 
         case FRAME.ERROR:
             const errorCode = view.getUint16(3, true);
-            console.error(`Received error frame with code: 0x${errorCode.toString(16)}`);
+            const errorInfo = ZEPHYR_ERRORS[errorCode];
+            if (errorInfo) {
+                console.error(
+                    `Received error frame: 0x${errorCode.toString(16).padStart(2, '0')} (${errorInfo.zephyr}) - ${errorInfo.text}`
+                );
+            } else {
+                console.error(`Received error frame with code: 0x${errorCode.toString(16).padStart(2, '0')}`);
+            }
             showErrorToast(errorCode);
             if (lsReject) {
                 const currentReject = lsReject;
@@ -361,6 +368,7 @@ export function buildFWInfoRequest(): ArrayBuffer {
 export function buildLSRequest(path: string): ArrayBuffer {
     const encoder = new TextEncoder();
     const pathBytes = encoder.encode(path);
+    console.debug(`[Protocol] LS request for path: ${path}`);
     const buffer = new ArrayBuffer(4 + pathBytes.length);
     const view = new DataView(buffer);
 
@@ -442,6 +450,7 @@ export function setFileGetResolver(
 export function buildFileGetRequest(path: string): ArrayBuffer {
     const encoder = new TextEncoder();
     const pathBytes = encoder.encode(path);
+    console.debug(`[Protocol] FILE_GET request for path: ${path}`);
     const buffer = new ArrayBuffer(4 + pathBytes.length);
     const view = new DataView(buffer);
 
@@ -458,6 +467,7 @@ export function buildFileGetRequest(path: string): ArrayBuffer {
 export function buildTagsGetRequest(path: string): ArrayBuffer {
     const encoder = new TextEncoder();
     const pathBytes = encoder.encode(path);
+    console.debug(`[Protocol] TAGS_GET request for path: ${path}`);
     const buffer = new ArrayBuffer(4 + pathBytes.length);
     const view = new DataView(buffer);
 

webpage/src/lib/sync.ts

@@ -34,12 +34,18 @@ export async function refreshRemote() {
         await new Promise(r => setTimeout(r, 100));
 
         const currentFsInfo = get(fsInfo);
+        console.debug("[Sync] Remote FS info:", currentFsInfo);
 
         // Sequenzielle Abfrage via Transport-Layer
-        const sysFiles = await fetchDirectory(currentFsInfo?.sysPath || "/lfs/sys");
+        const sysPath = currentFsInfo?.sysPath || "/lfs/sys";
+        const audioPath = currentFsInfo?.audioPath || "/lfs/a";
+
+        console.debug(`[Sync] Listing system directory: ${sysPath}`);
+        const sysFiles = await fetchDirectory(sysPath);
         buzzerSysFiles.set(sysFiles.map(mapToBuzzerFile));
 
-        const audioFiles = await fetchDirectory(currentFsInfo?.audioPath || "/lfs/a");
+        console.debug(`[Sync] Listing audio directory: ${audioPath}`);
+        const audioFiles = await fetchDirectory(audioPath);
         let mappedAudio = audioFiles.map(mapToBuzzerFile);
 
         // Dateien sofort im UI anzeigen, bevor die Tags geladen sind
@@ -101,6 +107,7 @@ export async function refreshLocal() {
 export async function downloadSelectedFiles() {
     const files = get(buzzerAudioFiles).filter(f => f.selected);
     const pathPrefix = get(fsInfo)?.audioPath || "/lfs/a";
+    console.debug(`[Sync] Download prefix: ${pathPrefix}`);
 
     if (files.length === 0) {
         addToast("Keine Dateien zum Herunterladen ausgewählt.", "warning");
@@ -181,6 +188,7 @@ export async function deleteSelectedLocalFiles() {
 export async function deleteSelectedRemoteFiles() {
     const files = get(buzzerAudioFiles).filter(f => f.selected);
     const pathPrefix = get(fsInfo)?.audioPath || "/lfs/a";
+    console.debug(`[Sync] Delete prefix: ${pathPrefix}`);
 
     if (files.length === 0) return;
 
@@ -208,6 +216,7 @@ export async function deleteSelectedRemoteFiles() {
 export async function uploadSelectedFiles() {
     const files = get(localAudioFiles).filter(f => f.selected);
     const pathPrefix = get(fsInfo)?.audioPath || "/lfs/a";
+    console.debug(`[Sync] Upload prefix: ${pathPrefix}`);
 
     if (files.length === 0) {
         addToast("Keine Dateien zum Hochladen ausgewählt.", "warning");

webpage/src/lib/transport.ts

@@ -66,6 +66,8 @@ export async function fetchDirectory(path: string): Promise<any[]> {
     }
     isListing = true;
 
+    console.debug(`[Transport] fetchDirectory(${path})`);
+
     return new Promise(async (resolve, reject) => {
         // Dem Parser sagen, wen er bei Erfolg/Fehler anrufen soll
         setLsResolver(
@@ -95,6 +97,8 @@ export async function getFile(path: string): Promise<boolean> {
     }
     isFileTransferring = true;
 
+    console.debug(`[Transport] getFile(${path})`);
+
     return new Promise(async (resolve, reject) => {
         setFileGetResolver(
             (result: any) => { isFileTransferring = false; resolve(result.success); },
@@ -116,6 +120,8 @@ export async function getTags(path: string): Promise<Blob> {
     }
     isFileTransferring = true;
 
+    console.debug(`[Transport] getTags(${path})`);
+
     return new Promise(async (resolve, reject) => {
         setFileGetResolver(
             (result: any) => {