feat(esphome): Add CAN configuration

Signed-off-by: Eduard Iten <eduard@iten.pro>
2025-07-22 08:55:30 +02:00 · 2025-07-22 08:55:30 +02:00 · 08c47f00f8
parent 1cba00df8c
commit 08c47f00f8
1 changed files with 106 additions and 0 deletions
--- a/software/esphome/can.yaml
+++ b/software/esphome/can.yaml
@ -0,0 +1,106 @@
+# ===================================================================
+# ESPHome Configuration
+# CAN-Bus Master für ein Bewässerungssystem auf Basis des ESP32-C6
+#
+# Version 10: Finale Korrektur der Lambda-Signatur gemäß Dokumentation
+# ===================================================================
+
+esphome:
+  name: can-bridge
+  friendly_name: Irrigation can bridge
+
+esp32:
+  board: esp32-c6-devkitm-1
+  framework:
+    type: esp-idf # Erforderlich für den ESP32-C6
+
+# --- Netzwerk & Sicherheit ---
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  fast_connect: true
+
+api:
+  encryption:
+    key: !secret api_key
+
+ota:
+  platform: esphome
+  password: !secret ota_password
+
+logger:
+
+web_server:
+
+# --- Globale Variablen ---
+globals:
+  - id: ventil_2_can_state
+    type: int
+    initial_value: '0' # Startet als "geschlossen"
+
+# --- CAN-Bus Konfiguration ---
+canbus:
+  - platform: esp32_can
+    id: my_can_bus
+    tx_pin: GPIO5
+    rx_pin: GPIO4
+    bit_rate: 125kbps
+    can_id: 0x000 # Erforderlich, um Parser-Fehler zu beheben.
+    on_frame:
+      # Horcht nur auf die Statusmeldung von Knoten 2 (ID 0x422)
+      - can_id: 0x422
+        then:
+          - lambda: |-
+              if (x.size() < 1) {
+                ESP_LOGW("on_can_frame", "Received empty Frame for ID 0x422");
+                return;
+              }
+              int received_state = x[0];
+              id(ventil_2_can_state) = received_state;
+              ESP_LOGD("on_can_frame", "Received state from Valve 2: %i", received_state);
+          - valve.template.publish:
+              id: ventil_2
+              current_operation: !lambda |-
+                int state = id(ventil_2_can_state);
+                if (state == 2) {
+                  return VALVE_OPERATION_OPENING;
+                } else if (state == 3) {
+                  return VALVE_OPERATION_CLOSING;
+                } else {
+                  return VALVE_OPERATION_IDLE;
+                }
+
+# --- Home Assistant Entitäten ---
+valve:
+  - platform: template
+    name: "Ventil 2"
+    id: ventil_2
+    
+    # Diese Lambda meldet nur den binären End-Zustand (offen/geschlossen)
+    lambda: |-
+      if (id(ventil_2_can_state) == 0) {
+        return VALVE_CLOSED;
+      } else if (id(ventil_2_can_state) == 1) {
+        return VALVE_OPEN;
+      } else {
+        return NAN;
+      }
+
+    # Aktionen zum Steuern des Ventils
+    open_action:
+      - canbus.send:
+          canbus_id: my_can_bus
+          can_id: 0x210
+          data: [0x02, 0x01]
+
+    close_action:
+      - canbus.send:
+          canbus_id: my_can_bus
+          can_id: 0x210
+          data: [0x02, 0x00]
+
+    stop_action:
+      - canbus.send:
+          canbus_id: my_can_bus
+          can_id: 0x210
+          data: [0x02, 0x03]