gateway: working shell on uart0 and mcumgr on usb_serial, minimal OS mgmt config\n

Signed-off-by: Eduard Iten <eduard@iten.pro>

software/apps/gateway/CMakeLists.txt

@@ -1,9 +1,8 @@
-cmake_minimum_required(VERSION 3.20)
+cmake_minimum_required(VERSION 3.20.5)
-
-# Include the main 'software' directory as a module to find boards, libs, etc.
-list(APPEND ZEPHYR_EXTRA_MODULES ${CMAKE_CURRENT_SOURCE_DIR}/../..)
 
 find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
-project(gateway)
 
+project(gateway)
 target_sources(app PRIVATE src/main.c)
+
+target_include_directories(app PRIVATE include)

software/apps/gateway/README.md

@@ -0,0 +1,44 @@
+# README for the Hello World Zephyr Application
+
+## Overview
+
+This is a minimal Hello World application built using the Zephyr RTOS. The application demonstrates basic logging functionality by printing a message every 5 seconds, including the version number of the application.
+
+## Project Structure
+
+The project consists of the following files:
+
+- `src/main.c`: The entry point of the application that initializes logging and sets up a timer.
+- `include/app_version.h`: Header file that defines the application version.
+- `VERSION`: A text file containing the version number of the application.
+- `prj.conf`: Configuration file for the Zephyr project, specifying necessary options.
+- `CMakeLists.txt`: Build configuration file for CMake.
+- `README.md`: Documentation for the project.
+
+## Building the Application
+
+To build the application, follow these steps:
+
+1. Ensure you have the Zephyr development environment set up.
+2. Navigate to the `apps/gateway` directory.
+3. Run the following command to build the application:
+
+   ```
+   west build -b <your_board> .
+   ```
+
+   Replace `<your_board>` with the appropriate board name.
+
+## Running the Application
+
+After building the application, you can flash it to your board using:
+
+```
+west flash
+```
+
+Once the application is running, you will see log messages printed every 5 seconds, including the version number.
+
+## Version
+
+The version of this application can be found in the `VERSION` file and is also included in the log messages.

software/apps/gateway/VERSION

@@ -0,0 +1,5 @@
+VERSION_MAJOR = 0
+VERSION_MINOR = 0
+PATCHLEVEL = 1
+VERSION_TWEAK = 0
+EXTRAVERSION = devel

software/apps/gateway/boards/common_4MB.dtsi

@@ -0,0 +1,16 @@
+&flash0 {
+    reg = <0x0 0x400000>; /* 4MB flash */
+};
+
+#include "espressif/partitions_0x0_default_4M.dtsi"
+
+/ {
+    chosen {
+        zephyr,shell-uart = &uart0;
+        zephyr,uart-mcumgr = &usb_serial;
+    };
+};
+
+&usb_serial {
+    status = "okay";
+};

software/apps/gateway/boards/esp32c6_devkitc_hpcore.overlay

@@ -0,0 +1 @@
+#include "common_4MB.dtsi"

software/apps/gateway/prj.conf

@@ -1,2 +1,23 @@
-# Gateway Configuration
+# Enable logging
-CONFIG_NETWORKING=y
+CONFIG_LOG=y
+CONFIG_UART_CONSOLE=y
+
+# Enable shell
+CONFIG_SHELL=y
+CONFIG_KERNEL_SHELL=y
+CONFIG_REBOOT=y
+
+# Enable MCUMGR 
+CONFIG_MCUMGR=y
+
+# Enable MCUMGR OS management group only
+CONFIG_MCUMGR_GRP_OS=y
+
+# Configure MCUMGR transport to UART
+CONFIG_MCUMGR_TRANSPORT_UART=y
+
+# Dependencies
+CONFIG_NET_BUF=y
+CONFIG_ZCBOR=y
+CONFIG_CRC=y
+CONFIG_BASE64=y

software/apps/gateway/src/main.c

@@ -1,13 +1,11 @@
-/*
- * Copyright (c) 2025 Eduard Iten
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
 #include <zephyr/kernel.h>
+#include <zephyr/logging/log.h>
+#include <app_version.h>
+
+LOG_MODULE_REGISTER(hello_world);
 
 int main(void)
 {
-	printk("Hello from Gateway!\n");
+	LOG_INF("Hello World! Version: %s", APP_VERSION_EXTENDED_STRING);
 	return 0;
-}
+}

software/apps/gateway/sysbuild.conf

@@ -0,0 +1,2 @@
+SB_CONFIG_BOOTLOADER_MCUBOOT=y
+SB_CONFIG_MCUBOOT_MODE_SINGLE_APP=y

software/apps/gateway/sysbuild/gateway.overlay

@@ -0,0 +1,12 @@
+#include "../boards/common_4MB.dtsi"
+
+/* Application Configuration - Firmware goes to slot0_partition (0x20000) */
+/ {
+    chosen {
+        zephyr,code-partition = &slot0_partition;
+    };
+};
+
+&usb_serial {
+    status = "okay";
+};

software/apps/gateway/sysbuild/mcuboot.conf

@@ -0,0 +1,3 @@
+CONFIG_LOG=y
+CONFIG_MCUBOOT_LOG_LEVEL_INF=y
+CONFIG_UART_CONSOLE=n

software/apps/gateway/sysbuild/mcuboot.overlay

@@ -0,0 +1,12 @@
+#include "../boards/common_4MB.dtsi"
+
+/* MCUboot Configuration - Bootloader goes to boot_partition (0x0) */
+/ {
+    chosen {
+        zephyr,code-partition = &boot_partition;
+    };
+    aliases {
+        mcuboot-button0 = &user_button1;
+    };
+    
+};