- Switch from simulated to real ADC readings in adc_sensor library
- Add GPIO control for VND7050AJ sensor selection (sen, s0, s1 pins)
- Implement proper ADC device and channel setup for voltage/current measurements
- Enable ADC driver in prj.conf (CONFIG_ADC=y)
- Disable simulation mode (CONFIG_ADC_SENSOR_SIMULATED=n)
- Add devicetree bindings for custom supply voltage and motor current sensors
- Update overlay with adc_sensors nodes using PB4, PB5, PB6 pins
- Integrate real ADC readings into Modbus server registers
- Support HSE/HSI clock source toggling in overlay configuration
Introduces device tree bindings for custom ADC voltage and current sensors,
allowing for flexible configuration of sensor inputs and associated GPIOs.
This enables proper hardware abstraction for ADC measurements.
The example overlay file
has been removed as its content is now integrated or superseded by the new
binding definitions.
Added Doxygen-style comments to all C source and header files in the
and directories. This improves
code documentation and enables VSCode tooltip help.
Additionally, short inline comments were added to all global variables
for better clarity.
Adds a new `adc_sensor` library to abstract reading analog values from ADC channels. The output of this library is currently simulated.
This library is now used by the `modbus_server` to read the motor current and the main supply voltage, replacing the previous implementation. This change improves modularity by centralizing ADC-related code into a dedicated module.
The build system has been updated to include the new library.
This commit introduces application versioning, exposing version information through the Modbus server and logging it at startup.
- Add to provide version information
- Update to log the application version at startup
- Update to expose firmware version via Modbus
- Add file association for in
- Initialize RST pin as active to keep VND7050AJ out of reset state
- Clarify S0/S1 pins as output select pins with descriptive comments
- Add initialization logging to show configured max open/close times
- Ensure proper valve controller startup sequence
This commit enhances the Modbus server's configuration handling by:
- Loading saved baudrate and unit ID settings during initialization, ensuring persistence across reboots.
- Providing improved feedback during `modbus_reconfigure`, including logging for successful changes and informing the user when a device restart is required for changes to take effect.
- Saving new configuration settings even if immediate reinitialization fails, allowing them to be applied on the next boot.
This commit introduces a new Modbus input register for the system's supply voltage.
- The `modbus-registers.de.md` documentation is updated to include the `SUPPLY_VOLTAGE_MV` register at address `0x00F5` within the system block.
- The `modbus_server.h` header defines the new register.
- The `modbus_server.c` implementation provides a fixed value (12300 mV) for this register.
- The `modbus_tool.py` script is updated to read and display this new supply voltage value in the UI.
This lays the groundwork for integrating actual voltage measurements in the future.
This commit implements the real valve control using the GPIOs connected to the VND7050AJ driver.
- The `weact_stm32g431_core.overlay` is updated with a specific compatible string and a device tree label for the valve controller.
- `valve.h` is extended to include GPIO device specifications.
- `valve.c` now initializes and controls the GPIOs for opening and closing the valve, including the reset logic. The IN0 and IN1 pins are interlocked to prevent simultaneous activation. The RST pin is activated before each movement and deactivated afterward.
This replaces the previous virtual/simulated valve logic with actual hardware control.
This commit introduces a major refactoring of the project structure to align
with Zephyr's recommended multi-application and library organization.
Key changes include:
- Relocation of custom modules from 'software/modules/' to 'software/lib/'.
- Introduction of a central 'software/CMakeLists.txt' to manage application
and library subdirectories.
- Creation of new Kconfig files for 'software/' and 'software/apps/slave_node/'
to define project-wide and application-specific configurations.
- Removal of the 'gateway' and 'stm32g431_tests' applications.
- Removal of 'shell_modbus.c' and 'shell_system.c' from 'slave_node' application's
direct source files, indicating a shift towards library-based shell commands.
- Updates to 'software/apps/slave_node/CMakeLists.txt', 'prj.conf', and
'boards/bluepill_f103rb.conf' to reflect the new structure and dependencies.
- Reorganize the software directory to support multiple Zephyr applications (gateway, slave_node).
- Create a clear separation between applications and shared libraries.
- Add placeholder files for gateway and slave_node applications.
Eduard Iten