- Create centralized sensor multiplexer node (vnd7050aj_mux) with shared configuration
- Consolidate ADC channel, GPIO pins, and reference voltage in single location
- Update sensor bindings to reference centralized mux via sensor-mux property
- Add channel-based sensor selection using mux-channel property (0-3)
- Refactor ADC sensor library to use centralized GPIO and channel control
- Update valve library to use new vnd7050aj_mux node reference
- Eliminate duplicate ADC/GPIO definitions between voltage and current sensors
- Ensure configuration consistency and prevent mismatched settings
Benefits:
- Single source of truth for VND7050AJ hardware configuration
- Impossible to have inconsistent GPIO/ADC settings between sensors
- Simplified maintenance and scalability for additional sensors
- Clean channel-based multiplexer selection interface
- Switch from simulated to real ADC readings in adc_sensor library
- Add GPIO control for VND7050AJ sensor selection (sen, s0, s1 pins)
- Implement proper ADC device and channel setup for voltage/current measurements
- Enable ADC driver in prj.conf (CONFIG_ADC=y)
- Disable simulation mode (CONFIG_ADC_SENSOR_SIMULATED=n)
- Add devicetree bindings for custom supply voltage and motor current sensors
- Update overlay with adc_sensors nodes using PB4, PB5, PB6 pins
- Integrate real ADC readings into Modbus server registers
- Support HSE/HSI clock source toggling in overlay configuration
Introduces device tree bindings for custom ADC voltage and current sensors,
allowing for flexible configuration of sensor inputs and associated GPIOs.
This enables proper hardware abstraction for ADC measurements.
The example overlay file
has been removed as its content is now integrated or superseded by the new
binding definitions.
Added Doxygen-style comments to all C source and header files in the
and directories. This improves
code documentation and enables VSCode tooltip help.
Additionally, short inline comments were added to all global variables
for better clarity.
Adds a new `adc_sensor` library to abstract reading analog values from ADC channels. The output of this library is currently simulated.
This library is now used by the `modbus_server` to read the motor current and the main supply voltage, replacing the previous implementation. This change improves modularity by centralizing ADC-related code into a dedicated module.
The build system has been updated to include the new library.
Eduard Iten