feat(can): Add CAN ID definitions

This commit introduces the CAN ID definitions for the irrigation system.
It defines the structure of the CAN IDs and macros for priority and function.
Signed-off-by: Eduard Iten <eduard@iten.pro>

.gitignore

@@ -1 +1,65 @@
 **/build
+
+# Zephyr build directories
+build/
+build-*/
+*/build/
+**/build/
+
+# Zephyr out-of-tree build directories
+out-of-tree-build/
+
+# Files generated by the build system
+zephyr.elf
+zephyr.bin
+zephyr.hex
+zephyr.map
+zephyr.strip
+zephyr.lst
+zephyr.asm
+zephyr.stat
+zephyr.a
+zephyr.o
+*.o
+*.a
+*.so
+*.so.*
+*.dll
+*.exe
+
+# Cmake
+CMakeCache.txt
+CMakeFiles/
+cmake_install.cmake
+CTestTestfile.cmake
+compile_commands.json
+
+# Kconfig generated files
+.config
+.config.old
+autoconf.h
+
+# Doxygen
+doxygen/
+
+# west
+.west/
+west.yml.bak
+
+# Editor-specific files
+.vscode/
+.idea/
+*.swp
+*~
+*.bak
+*.orig
+
+# Python
+__pycache__/
+*.pyc
+
+# Mac OS X
+.DS_Store
+
+# Windows
+Thumbs.db

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "software/modules/zephyr_vnd7050aj_driver"]
+	path = software/modules/zephyr_vnd7050aj_driver
+	url = https://gitea.iten.pro/edi/zephyr_vnd7050aj_driver.git

.vscode/tasks.json

@@ -0,0 +1,14 @@
+{
+	"version": "2.0.0",
+	"tasks": [
+		{
+			"type": "shell",
+			"label": "Build Zephyr app",
+			"command": "west build -b weact_stm32g431_core .",
+			"group": "build",
+			"problemMatcher": [
+				"$gcc"
+			]
+		}
+	]
+}

docs/concept.de.md

@@ -39,7 +39,7 @@ Die Slave-Nodes sind die Arbeitseinheiten im Feld. Um bei der Fertigung kleiner
 
 * **Mikrocontroller:** Ein `STM32G431PB`. Dieser ist zwar leistungsstark, bietet aber alle nötigen Peripherien (mehrere UARTs, ADCs, CAN) und ermöglicht ein einheitliches Hardware- und Software-Design.
 * **Peripherie pro Node:**
-    * **Zwei High-Side Ausgänge (+12V):** Realisiert über einen `VND7050AJ`. Perfekt zur Ansteuerung der 12V-Motorventile (`Öffnen`/`Schliessen`). Die `Sense`-Leitung des Treibers wird über einen AD-Wandler ausgelesen, um durch Messung des Motorstroms eine Endlagen-Erkennung ohne physische Endschalter zu realisieren (Motorstrom im Stillstand ≈ 0).
+    * **Zwei High-Side Ausgänge (+12V):** Realisiert über einen `VND7050AJ`. Perfekt zur Ansteuerung der 12V-Motorventile (`Öffnen`/`Schliessen`). Die `Sense`-Leitung des Treibers wird über einen AD-Wandler ausgelesen, um durch Messung des Motorstroms eine Endlagen-Erkennung ohne physische Endschalter zu realisieren (Motorstrom im Stillstand ≈ 0). Zusätzlich können die Temperatur und die Versorgungsspannung des Treibers ausgelesen werden.
     * **Zwei Low-Side Ausgänge (0V):** Über N-Kanal-MOSFETs geschaltete Ausgänge. Nutzbar zur Ansteuerung von 12V-LEDs in Tastern oder zum Schalten des Halbleiter-Relais für die Pumpe.
     * **Zwei digitale Eingänge:** Direkte, geschützte Eingänge am Controller zum Anschluss von Tastern oder den kapazitiven NPN-Sensoren.
 

docs/modbus-registers.de.md

@@ -29,33 +29,38 @@ Alle Register sind in einer einzigen, durchgehenden Liste pro Register-Typ (`Inp
 
 | Adresse (hex) | Name                           | Zugehörigkeit     | Beschreibung                                                                                                                              |
 | :------------ | :----------------------------- | :---------------- | :---------------------------------------------------------------------------------------------------------------------------------------- |
-| **0x0000** | `VENTIL_ZUSTAND_BEWEGUNG`        | Ventil            | Kombiniertes Status-Register. **High-Byte**: Bewegung (`0`=Idle, `1`=Öffnet, `2`=Schliesst, `3`=Fehler). **Low-Byte**: Zustand (`0`=Geschlossen, `1`=Geöffnet). |
+| **0x0000** | `VALVE_STATE_MOVEMENT`        | Ventil            | Kombiniertes Status-Register. **High-Byte**: Bewegung (`0`=Idle, `1`=Öffnet, `2`=Schliesst, `3`=Fehler). **Low-Byte**: Zustand (`0`=Geschlossen, `1`=Geöffnet). |
-| **0x0001** | `MOTORSTROM_MA`                | Ventil            | Aktueller Motorstrom in Milliampere (mA).                                                                                                 |
+| **0x0001** | `REG_INPUT_MOTOR_OPEN_CURRENT_MA`           | Ventil            | Motorstrom beim Öffnen in Milliampere (mA).                                                                                               |
-| **0x0020** | `DIGITAL_EINGAENGE_ZUSTAND`    | Eingänge          | Bitmaske der digitalen Eingänge. Bit 0: Eingang 1, Bit 1: Eingang 2. `1`=Aktiv.                                                          |
+| **0x0002** | `REG_INPUT_MOTOR_CLOSE_CURRENT_MA`          | Ventil            | Motorstrom beim Schließen in Milliampere (mA).                                                                                            |
-| **0x0021** | `TASTER_EVENTS`                | Eingänge          | Event-Flags für Taster (Clear-on-Read). Bit 0: Taster 1 gedrückt. Bit 1: Taster 2 gedrückt.                                                 |
+| **0x0020** | `REG_INPUT_DIGITAL_INPUTS_STATE`    | Eingänge          | Bitmaske der digitalen Eingänge. Bit 0: Eingang 1, Bit 1: Eingang 2. `1`=Aktiv.                                                          |
-| **0x00F0** | `FIRMWARE_VERSION_MAJOR_MINOR` | System            | z.B. `0x0102` für v1.2.                                                                                                                   |
+| **0x0021** | `REG_INPUT_BUTTON_EVENTS`                | Eingänge          | Event-Flags für Taster (Clear-on-Read). Bit 0: Taster 1 gedrückt. Bit 1: Taster 2 gedrückt.                                                 |
-| **0x00F1** | `FIRMWARE_VERSION_PATCH`       | System            | z.B. `3` für v1.2.3.                                                                                                                      |
+| **0x00F0** | `REG_INPUT_FIRMWARE_VERSION_MAJOR_MINOR` | System            | z.B. `0x0102` für v1.2.                                                                                                                   |
-| **0x00F2** | `DEVICE_STATUS`                | System            | `0`=OK, `1`=Allgemeiner Fehler.                                                                                                           |
+| **0x00F1** | `REG_INPUT_FIRMWARE_VERSION_PATCH`       | System            | z.B. `3` für v1.2.3.                                                                                                                      |
-| **0x00F3** | `UPTIME_SECONDS_LOW`           | System            | Untere 16 Bit der Uptime in Sekunden.                                                                                                     |
+| **0x00F2** | `REG_INPUT_DEVICE_STATUS`                | System            | `0`=OK, `1`=Allgemeiner Fehler.                                                                                                           |
-| **0x00F4** | `UPTIME_SECONDS_HIGH`          | System            | Obere 16 Bit der Uptime.                                                                                                                  |
+| **0x00F3** | `REG_INPUT_UPTIME_SECONDS_LOW`           | System            | Untere 16 Bit der Uptime in Sekunden.                                                                                                     |
-| **0x00F5** | `SUPPLY_VOLTAGE_MV`            | System            | Aktuelle Versorgungsspannung in Millivolt (mV).                                                                                           |
+| **0x00F4** | `REG_INPUT_UPTIME_SECONDS_HIGH`          | System            | Obere 16 Bit der Uptime.                                                                                                                  |
-| **0x0100** | `FWU_LAST_CHUNK_CRC`           | Firmware-Update   | Enthält den CRC16 des zuletzt im Puffer empfangenen Daten-Chunks.                                                                         |
+| **0x00F5** | `REG_INPUT_SUPPLY_VOLTAGE_MV`            | System            | Aktuelle Versorgungsspannung in Millivolt (mV).                                                                                           |
+| **0x0100** | `REG_INPUT_FWU_LAST_CHUNK_CRC`           | Firmware-Update   | Enthält den CRC16 des zuletzt im Puffer empfangenen Daten-Chunks.                                                                         |
 
 ## 3. Holding Registers (4xxxx, Read/Write)
 
 | Adresse (hex) | Name                          | Zugehörigkeit     | Beschreibung                                                                                                                              |
 | :------------ | :---------------------------- | :---------------- | :---------------------------------------------------------------------------------------------------------------------------------------- |
-| **0x0000** | `VENTIL_BEFEHL`               | Ventil            | `1`=Öffnen, `2`=Schliessen, `0`=Bewegung stoppen.                                                                                           |
+| **0x0000** | `REG_HOLDING_VALVE_COMMAND`               | Ventil            | `1`=Öffnen, `2`=Schliessen, `0`=Bewegung stoppen.                                                                                           |
-| **0x0001** | `MAX_OEFFNUNGSZEIT_S`         | Ventil            | Sicherheits-Timeout in Sekunden für den Öffnen-Vorgang.                                                                                    |
+| **0x0001** | `REG_HOLDING_MAX_OPENING_TIME_S`         | Ventil            | Sicherheits-Timeout in Sekunden für den Öffnen-Vorgang.                                                                                    |
-| **0x0002** | `MAX_SCHLIESSZEIT_S`          | Ventil            | Sicherheits-Timeout in Sekunden für den Schliessen-Vorgang.                                                                                |
+| **0x0002** | `REG_HOLDING_MAX_CLOSING_TIME_S`          | Ventil            | Sicherheits-Timeout in Sekunden für den Schliessen-Vorgang.                                                                                |
-| **0x0010** | `DIGITAL_AUSGAENGE_ZUSTAND`   | Ausgänge          | Bitmaske zum Lesen und Schreiben der Ausgänge. Bit 0: Ausgang 1, Bit 1: Ausgang 2. `1`=AN, `0`=AUS.                                         |
+| **0x0003** | `REG_HOLDING_END_CURRENT_THRESHOLD_OPEN_MA` | Ventil            | Minimaler Stromschwellenwert in mA zur Endlagenerkennung beim Öffnen.                                                                     |
-| **0x00F0** | `WATCHDOG_TIMEOUT_S`          | System            | Timeout des Fail-Safe-Watchdogs in Sekunden. `0`=Deaktiviert.                                                                             |
+| **0x0004** | `REG_HOLDING_END_CURRENT_THRESHOLD_CLOSE_MA` | Ventil            | Minimaler Stromschwellenwert in mA zur Endlagenerkennung beim Schliessen.                                                                |
-| **0x00F1** | `DEVICE_RESET`                | System            | Schreibt `1` um das Gerät neu zu starten.                                                                                                 |
+| **0x0005** | `REG_HOLDING_OBSTACLE_THRESHOLD_OPEN_MA` | Ventil            | Stromschwellenwert in mA für die Hinderniserkennung beim Öffnen.                                                                    |
-| **0x0100** | `FWU_COMMAND`                 | Firmware-Update   | `1`: **Verify Chunk**: Der zuletzt übertragene Chunk wurde vom Client als gültig befunden. Der Slave soll ihn nun ins Flash schreiben. `2`: **Finalize Update**: Alle Chunks sind übertragen. Installation abschliessen und neu starten. |
+| **0x0006** | `REG_HOLDING_OBSTACLE_THRESHOLD_CLOSE_MA` | Ventil            | Stromschwellenwert in mA für die Hinderniserkennung beim Schließen.                                                                    |
-| **0x0101** | `FWU_CHUNK_OFFSET_LOW`        | Firmware-Update   | Untere 16 Bit des 32-Bit-Offsets, an den der nächste Chunk geschrieben werden soll.                                                         |
+| **0x0010** | `REG_HOLDING_DIGITAL_OUTPUTS_STATE`   | Ausgänge          | Bitmaske zum Lesen und Schreiben der Ausgänge. Bit 0: Ausgang 1, Bit 1: Ausgang 2. `1`=AN, `0`=AUS.                                         |
-| **0x0102** | `FWU_CHUNK_OFFSET_HIGH`       | Firmware-Update   | Obere 16 Bit des 32-Bit-Offsets.                                                                                                          |
+| **0x00F0** | `REG_HOLDING_WATCHDOG_TIMEOUT_S`          | System            | Timeout des Fail-Safe-Watchdogs in Sekunden. `0`=Deaktiviert.                                                                             |
-| **0x0103** | `FWU_CHUNK_SIZE`              | Firmware-Update   | Grösse des nächsten Chunks in Bytes (max. 256).                                                                                           |
+| **0x00F1** | `REG_HOLDING_DEVICE_RESET`                | System            | Schreibt `1` um das Gerät neu zu starten.                                                                                                 |
-| **0x0180** | `FWU_DATA_BUFFER`             | Firmware-Update   | **Startadresse** eines 128x16-bit Puffers (256 Bytes). Entspricht den Registern `40384` bis `40511`.                                       |
+| **0x0100** | `REG_HOLDING_FWU_COMMAND`                 | Firmware-Update   | `1`: **Verify Chunk**: Der zuletzt übertragene Chunk wurde vom Client als gültig befunden. Der Slave soll ihn nun ins Flash schreiben. `2`: **Finalize Update**: Alle Chunks sind übertragen. Installation abschliessen und neu starten. |
+| **0x0101** | `REG_HOLDING_FWU_CHUNK_OFFSET_LOW`        | Firmware-Update   | Untere 16 Bit des 32-Bit-Offsets, an den der nächste Chunk geschrieben werden soll.                                                         |
+| **0x0102** | `REG_HOLDING_FWU_CHUNK_OFFSET_HIGH`       | Firmware-Update   | Obere 16 Bit des 32-Bit-Offsets.                                                                                                          |
+| **0x0103** | `REG_HOLDING_FWU_CHUNK_SIZE`              | Firmware-Update   | Grösse des nächsten Chunks in Bytes (max. 256).                                                                                           |
+| **0x0180** | `REG_HOLDING_FWU_DATA_BUFFER`             | Firmware-Update   | **Startadresse** eines 128x16-bit Puffers (256 Bytes). Entspricht den Registern `40384` bis `40511`.                                       |
 
 ## 4. Detaillierter Firmware-Update-Prozess
 
@@ -80,10 +85,10 @@ Diese Register gehören zum externen Füllstandsensor und können auf dem Bus eb
 
 | Adresse (hex) | Name                       | R/W | Beschreibung                                                                                                                              |
 | :------------ | :------------------------- | :-- | :---------------------------------------------------------------------------------------------------------------------------------------- |
-| **0x0000** | `NODE_ADRESSE`             | R/W | Geräteadresse des Sensors (1-255).                                                                                                        |
+| **0x0000** | `NODE_ADDRESS`             | R/W | Geräteadresse des Sensors (1-255).                                                                                                        |
 | **0x0001** | `BAUDRATE`                 | R/W | `0`=1200, `1`=2400, `2`=4800, `3`=9600, `4`=19200, `5`=38400, `6`=57600, `7`=115200.                                                       |
-| **0x0002** | `EINHEIT`                  | R/W | `0`=Keine, `1`=cm, `2`=mm, `3`=MPa, `4`=Pa, `5`=kPa.                                                                                        |
+| **0x0002** | `UNIT`                  | R/W | `0`=Keine, `1`=cm, `2`=mm, `3`=MPa, `4`=Pa, `5`=kPa.                                                                                        |
-| **0x0003** | `NACHKOMMASTELLEN`         | R/W | Anzahl der Dezimalstellen für den Messwert (0-3).                                                                                         |
+| **0x0003** | `DECIMAL_PLACES`         | R/W | Anzahl der Dezimalstellen für den Messwert (0-3).                                                                                         |
-| **0x0004** | `MESSWERT_AKTUELL`         | R   | Der skalierte Messwert als vorzeichenbehafteter 16-Bit-Integer.                                                                           |
+| **0x0004** | `CURRENT_MEASUREMENT`         | R   | Der skalierte Messwert als vorzeichenbehafteter 16-Bit-Integer.                                                                           |
-| **0x0005** | `MESSBEREICH_NULLPUNKT`    | R/W | Rohwert für den Nullpunkt der Skala.                                                                                                      |
+| **0x0005** | `MEASUREMENT_RANGE_ZERO_POINT`    | R/W | Rohwert für den Nullpunkt der Skala.                                                                                                      |
-| **0x0006** | `MESSBEREICH_ENDPUNKT`     | R/W | Rohwert für den Endpunkt der Skala.                                                                                                       |
+| **0x0006** | `MEASUREMENT_RANGE_END_POINT`     | R/W | Rohwert für den Endpunkt der Skala.                                                                                                       |

docs/planning.de.md

@@ -9,11 +9,13 @@
 | ✅ | **Phase 0: Planung & Definition** | | |
 | ✅ | Konzept erstellen und finalisieren | 30.06.2025 | Architektur, Komponenten und grundlegende Architektur sind festgelegt. |
 | ✅ | MODBUS Register Map definieren | 30.06.2025 | Die "API" der Slaves ist definiert und bildet die Grundlage für die Software-Entwicklung. |
+| ✅ | Header- und deutsche Dokumentation aktualisiert | 10.07.2025 | Doxygen-Kommentare in Headern und deutsche .md-Dateien auf den neuesten Stand gebracht und übersetzt. |
 | ☐ | **Phase 1: Slave-Node Prototyp (STM32 Eval-Board)** | | **Ziel:** Ein einzelner Slave wird auf dem Eval-Board zum Leben erweckt. |
 | ✅ | 1.1 Entwicklungsumgebung für STM32/Zephyr einrichten | 30.06.2025 | Toolchain, VS Code, Zephyr-SDK, MCUBoot etc. installieren und ein "Hello World" zum Laufen bringen. |
-| ☐ | 1.2 Basis-Firmware für Slave-Node erstellen | | Hardware-Abstraktion (GPIOs, ADC, UART für RS485) implementieren. |
+| ✅ | 1.2 Hardware-Abstraktion (VND7050AJ, RS485) | 10.07.2025 | Implementierung der Treiber für den VND7050AJ und die RS485-Kommunikation. |
-| ☐ | 1.3 MODBUS-RTU Stack auf dem Slave implementieren | | Basierend auf der definierten Register-Map. Zuerst nur lesende Funktionen (Status, Version). |
+| ✅ | 1.3 Basis-Firmware für Slave-Node erstellen | 10.07.2025 | Hardware-Abstraktion (GPIOs) implementiert. |
-| ☐ | 1.4 Kernlogik implementieren (z.B. Ventilsteuerung) | | Umsetzung der `VENTIL_ZUSTAND_BEWEGUNG` Logik, Strommessung für Endlagen etc. |
+| ✅ | 1.3 MODBUS-RTU Stack auf dem Slave implementieren | 10.07.2025 | Basierend auf der definierten Register-Map. Zuerst nur lesende Funktionen (Status, Version). |
+| ✅ | 1.4 Kernlogik implementieren (z.B. Ventilsteuerung) | 10.07.2025 | Umsetzung der `VALVE_STATE_MOVEMENT` Logik, Strommessung für Endlagen etc. |
 | ☐ | **Phase 2: Verifikation der Slave-Firmware** | | **Ziel:** Nachweisen, dass der Slave sich exakt an die MODBUS-Spezifikation hält. |
 | ☐ | 2.1 Slave-Node mit PC via USB-MODBUS-Adapter testen | | **Kritischer Meilenstein.** Mit Tools wie "QModMaster" oder einem Python-Skript die Register lesen & schreiben. Die Slave-Firmware wird so unabhängig vom Gateway validiert. |
 | ☐ | 2.2 Firmware-Update Mechanismus testen | | Den kompletten Update-Prozess (Chunking, CRC-Check) mit einem Skript vom PC aus testen. Der Slave schreibt die Firmware dabei vorerst nur in einen ungenutzten RAM-Bereich. |

setup-format-hook.sh

@@ -0,0 +1,56 @@
+#!/bin/sh
+
+# This script sets up a Git pre-commit hook to automatically format C/C++ files
+# in the 'software/' subdirectory using clang-format.
+
+# Define the path for the pre-commit hook
+HOOK_DIR=".git/hooks"
+HOOK_FILE="$HOOK_DIR/pre-commit"
+
+# Create the hooks directory if it doesn't exist
+mkdir -p "$HOOK_DIR"
+
+# Create the pre-commit hook script using a 'here document'
+cat > "$HOOK_FILE" << 'EOF'
+#!/bin/sh
+
+# --- Pre-commit hook for clang-format ---
+#
+# This hook formats staged C, C++, and Objective-C files in the 'software/'
+# subdirectory before a commit is made.
+# It automatically finds the .clang-format file in the software/ directory.
+#
+
+# Directory to be formatted
+TARGET_DIR="software/"
+
+# Use git diff to find staged files that are Added (A), Copied (C), or Modified (M).
+# We filter for files only within the TARGET_DIR.
+# The grep regex matches common C/C++ and Objective-C file extensions.
+FILES_TO_FORMAT=$(git diff --cached --name-only --diff-filter=ACM "$TARGET_DIR" | grep -E '\.(c|h|cpp|hpp|cxx|hxx|cc|hh|m|mm)$')
+
+if [ -z "$FILES_TO_FORMAT" ]; then
+    # No relevant files to format, exit successfully.
+    exit 0
+fi
+
+echo "› Running clang-format on staged files in '$TARGET_DIR'..."
+
+# Run clang-format in-place on the identified files.
+# clang-format will automatically find the .clang-format file in the software/ directory
+# or any of its parent directories.
+echo "$FILES_TO_FORMAT" | xargs clang-format -i
+
+# Since clang-format may have changed the files, we need to re-stage them.
+echo "$FILES_TO_FORMAT" | xargs git add
+
+echo "› Formatting complete."
+
+exit 0
+EOF
+
+# Make the hook executable
+chmod +x "$HOOK_FILE"
+
+echo "✅ Git pre-commit hook has been set up successfully."
+echo "   It will now automatically format files in the '$PWD/software' directory before each commit."

software/.clang-format

@@ -0,0 +1,142 @@
+# Zephyr Project .clang-format configuration
+# Based on Linux kernel style with Zephyr-specific adaptations
+
+# Use LLVM as the base style and customize from there
+BasedOnStyle: LLVM
+
+# Language settings
+Language: Cpp
+
+# Indentation settings
+IndentWidth: 8
+TabWidth: 8
+UseTab: ForIndentation
+
+# Line length
+ColumnLimit: 100
+
+# Brace settings
+BreakBeforeBraces: Linux
+BraceWrapping:
+  AfterClass: true
+  AfterControlStatement: false
+  AfterEnum: true
+  AfterFunction: true
+  AfterNamespace: true
+  AfterStruct: true
+  AfterUnion: true
+  BeforeCatch: true
+  BeforeElse: false
+  IndentBraces: false
+  SplitEmptyFunction: true
+  SplitEmptyRecord: true
+  SplitEmptyNamespace: true
+
+# Always add braces for control statements (Zephyr requirement)
+RemoveBracesLLVM: false
+
+# Control statement settings
+SpaceBeforeParens: ControlStatements
+SpacesInParentheses: false
+
+# Function settings
+AllowShortFunctionsOnASingleLine: None
+AllowShortBlocksOnASingleLine: Empty
+AllowShortIfStatementsOnASingleLine: Never
+AllowShortLoopsOnASingleLine: false
+AllowShortCaseLabelsOnASingleLine: false
+
+# Pointer and reference alignment
+PointerAlignment: Right
+ReferenceAlignment: Right
+
+# Spacing settings
+SpaceAfterCStyleCast: false
+SpaceAfterLogicalNot: false
+SpaceBeforeAssignmentOperators: true
+SpaceBeforeCpp11BracedList: false
+SpaceBeforeCtorInitializerColon: true
+SpaceBeforeInheritanceColon: true
+SpaceBeforeRangeBasedForLoopColon: true
+SpaceInEmptyParentheses: false
+SpacesBeforeTrailingComments: 1
+SpacesInAngles: false
+SpacesInCStyleCastParentheses: false
+SpacesInContainerLiterals: false
+SpacesInSquareBrackets: false
+
+# Alignment settings
+AlignAfterOpenBracket: DontAlign
+AlignConsecutiveAssignments: false
+AlignConsecutiveDeclarations: false
+AlignEscapedNewlines: Right
+AlignOperands: false
+AlignTrailingComments: false
+
+# Breaking settings
+AlwaysBreakAfterDefinitionReturnType: None
+AlwaysBreakAfterReturnType: None
+AlwaysBreakBeforeMultilineStrings: false
+AlwaysBreakTemplateDeclarations: false
+BinPackArguments: false
+BinPackParameters: false
+BreakBeforeBinaryOperators: None
+BreakBeforeTernaryOperators: true
+BreakConstructorInitializersBeforeComma: false
+BreakAfterJavaFieldAnnotations: false
+BreakStringLiterals: true
+
+# Penalties (used for line breaking decisions)
+PenaltyBreakAssignment: 2
+PenaltyBreakBeforeFirstCallParameter: 19
+PenaltyBreakComment: 300
+PenaltyBreakFirstLessLess: 120
+PenaltyBreakString: 1000
+PenaltyExcessCharacter: 1000000
+PenaltyReturnTypeOnItsOwnLine: 60
+
+# Comment settings
+ReflowComments: true
+CommentPragmas: '^ IWYU pragma:'
+
+# Sorting settings
+SortIncludes: true
+SortUsingDeclarations: true
+
+# Preprocessor settings
+IndentPPDirectives: None
+MacroBlockBegin: ''
+MacroBlockEnd: ''
+
+# Misc settings
+CompactNamespaces: false
+ConstructorInitializerAllOnOneLineOrOnePerLine: false
+ConstructorInitializerIndentWidth: 4
+ContinuationIndentWidth: 4
+Cpp11BracedListStyle: true
+DerivePointerAlignment: false
+DisableFormat: false
+ExperimentalAutoDetectBinPacking: false
+FixNamespaceComments: true
+ForEachMacros: ['LISTIFY', 'FOR_EACH', 'FOR_EACH_FIXED_ARG', 'FOR_EACH_IDX', 'FOR_EACH_IDX_FIXED_ARG', 'FOR_EACH_NONEMPTY_TERM', 'Z_FOR_EACH', 'Z_FOR_EACH_FIXED_ARG', 'Z_FOR_EACH_IDX', 'Z_FOR_EACH_IDX_FIXED_ARG']
+IncludeBlocks: Preserve
+IncludeCategories:
+  - Regex: '^<zephyr/.*\.h>'
+    Priority: 1
+  - Regex: '^<.*\.h>'
+    Priority: 2
+  - Regex: '^<.*'
+    Priority: 3
+  - Regex: '.*'
+    Priority: 4
+IndentCaseLabels: false
+IndentWrappedFunctionNames: false
+JavaScriptQuotes: Leave
+JavaScriptWrapImports: true
+KeepEmptyLinesAtTheStartOfBlocks: false
+MaxEmptyLinesToKeep: 1
+NamespaceIndentation: None
+ObjCBinPackProtocolList: Auto
+ObjCBlockIndentWidth: 2
+ObjCSpaceAfterProperty: false
+ObjCSpaceBeforeProtocolList: true

software/.vscode/settings.json

@@ -1,17 +1,15 @@
 {
-        // Hush CMake
+	// Hush CMake
-		"cmake.configureOnOpen": false,
+	"cmake.configureOnOpen": false,
-
+	// IntelliSense
-		// IntelliSense
+	"C_Cpp.default.compilerPath": "${userHome}/zephyr-sdk-0.17.1/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe",
-		"C_Cpp.default.compilerPath": "${userHome}/zephyr-sdk-0.17.1/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe",
+	"C_Cpp.default.compileCommands": "${workspaceFolder}/build/compile_commands.json",
-		"C_Cpp.default.compileCommands": "${workspaceFolder}/build/compile_commands.json",
+	// File Associations
-
+	"files.associations": {
-		// File Associations
+		"app_version.h": "c"
-		"files.associations": {
+	},
-			"array": "c",
+	"C_Cpp.clang_format_style": "file",
-			"string_view": "c",
+	"nrf-connect.applications": [
-			"initializer_list": "c",
+		"${workspaceFolder}/apps/slave_node"
-			"span": "c",
+	],
-			"format": "c"
-		}
 }

software/.vscode/tasks.json

@@ -2,32 +2,20 @@
 	"version": "2.0.0",
 	"tasks": [
 		{
-			"label": "West Build",
+            "label": "Format All C/C++ Files",
-			"type": "shell",
+            "type": "shell",
-			"group": {
+            "command": "find . -name \"*.c\" -o -name \"*.h\" | xargs clang-format -i",
-				"kind": "build",
+            "problemMatcher": [],
-				"isDefault": true
+            "group": {
-			},
+                "kind": "build",
-			"linux": {
+                "isDefault": true
-				"command": "${userHome}/zephyrproject/.venv/bin/west"
+            },
-			},
+            "presentation": {
-			"windows": {
+                "reveal": "silent",
-				"command": "${userHome}/zephyrproject/.venv/Scripts/west.exe"
+                "clear": true,
-			},
+                "panel": "shared"
-			"osx": {
+            }
-				"command": "${userHome}/zephyrproject/.venv/bin/west"
+        },
-			},
-			"args": [
-				"build",
-				"-p",
-				"auto",
-				"-b",
-				"valve_node"
-			],
-			"problemMatcher": [
-				"$gcc"
-			]
-		},
 		{
 			"label": "West Configurable Build",
 			"type": "shell",

software/apps/adc_dt/README.rst

@@ -1,62 +0,0 @@
-.. zephyr:code-sample:: adc_dt
-   :name: Analog-to-Digital Converter (ADC) with devicetree
-   :relevant-api: adc_interface
-
-   Read analog inputs from ADC channels.
-
-Overview
-********
-
-This sample demonstrates how to use the :ref:`ADC driver API <adc_api>`.
-
-Depending on the target board, it reads ADC samples from one or more channels
-and prints the readings on the console. If voltage of the used reference can
-be obtained, the raw readings are converted to millivolts.
-
-The pins of the ADC channels are board-specific. Please refer to the board
-or MCU datasheet for further details.
-
-Building and Running
-********************
-
-The ADC peripheral and pinmux is configured in the board's ``.dts`` file. Make
-sure that the ADC is enabled (``status = "okay";``).
-
-In addition to that, this sample requires an ADC channel specified in the
-``io-channels`` property of the ``zephyr,user`` node. This is usually done with
-a devicetree overlay. The example overlay in the ``boards`` subdirectory for
-the ``nucleo_l073rz`` board can be easily adjusted for other boards.
-
-Configuration of channels (settings like gain, reference, or acquisition time)
-also needs to be specified in devicetree, in ADC controller child nodes. Also
-the ADC resolution and oversampling setting (if used) need to be specified
-there. See :zephyr_file:`boards/nrf52840dk_nrf52840.overlay
-<samples/drivers/adc/adc_dt/boards/nrf52840dk_nrf52840.overlay>` for an example of
-such setup.
-
-Building and Running for ST Nucleo L073RZ
-=========================================
-
-The sample can be built and executed for the
-:zephyr:board:`nucleo_l073rz` as follows:
-
-.. zephyr-app-commands::
-   :zephyr-app: samples/drivers/adc/adc_dt
-   :board: nucleo_l073rz
-   :goals: build flash
-   :compact:
-
-To build for another board, change "nucleo_l073rz" above to that board's name
-and provide a corresponding devicetree overlay.
-
-Sample output
-=============
-
-You should get a similar output as below, repeated every second:
-
-.. code-block:: console
-
-   ADC reading:
-   - ADC_0, channel 7: 36 = 65mV
-
-.. note:: If the ADC is not supported, the output will be an error message.

software/apps/adc_dt/boards/weact_stm32g431_core.overlay

@@ -1,38 +0,0 @@
-/ {
-	vdd_sense: voltage-divider {
-		compatible = "voltage-divider";
-		/*
-		 * This reference must provide one argument (the channel number)
-		 * because of the "#io-channel-cells = <1>" in the &adc1 node.
-		 */
-		io-channels = <&adc1 1>;
-		output-ohms = <2200>;
-		full-ohms = <3200>;
-	};
-};
-
-&adc1 {
-	status = "okay";
-
-	pinctrl-0 = <&adc1_in1_pa0>;
-	pinctrl-names = "default";
-
-	st,adc-clock-source = "SYNC";
-	st,adc-prescaler = <4>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	/*
-	 * This line is required by the st,stm32-adc driver binding.
-	 * It declares that references to its channels need one extra argument.
-	 */
-	#io-channel-cells = <1>;
-
-	adc_channel_1: channel@1 {
-		reg = <1>;
-		zephyr,gain = "ADC_GAIN_1";
-		zephyr,reference = "ADC_REF_INTERNAL";
-		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
-		zephyr,resolution = <12>;
-	};
-};

software/apps/adc_dt/prj.conf

@@ -1,4 +0,0 @@
-CONFIG_ADC=y
-CONFIG_SENSOR=y
-CONFIG_VOLTAGE_DIVIDER=y
-CONFIG_LOG=y

software/apps/adc_dt/sample.yaml

@@ -1,53 +0,0 @@
-sample:
-  name: ADC devicetree driver sample
-tests:
-  sample.drivers.adc.adc_dt:
-    tags:
-      - adc
-    depends_on: adc
-    platform_allow:
-      - nucleo_l073rz
-      - disco_l475_iot1
-      - cc3220sf_launchxl
-      - cc3235sf_launchxl
-      - cy8cproto_063_ble
-      - stm32l496g_disco
-      - stm32h735g_disco
-      - nrf51dk/nrf51822
-      - nrf52840dk/nrf52840
-      - nrf54l15dk/nrf54l15/cpuapp
-      - nrf54h20dk/nrf54h20/cpuapp
-      - ophelia4ev/nrf54l15/cpuapp
-      - mec172xevb_assy6906
-      - gd32f350r_eval
-      - gd32f450i_eval
-      - gd32vf103v_eval
-      - gd32f403z_eval
-      - esp32_devkitc/esp32/procpu
-      - esp32s2_saola
-      - esp32c3_devkitm
-      - gd32l233r_eval
-      - lpcxpresso55s36
-      - mr_canhubk3
-      - longan_nano
-      - longan_nano/gd32vf103/lite
-      - rd_rw612_bga
-      - frdm_mcxn947/mcxn947/cpu0
-      - mcx_n9xx_evk/mcxn947/cpu0
-      - frdm_mcxc242
-      - ucans32k1sic
-      - xg24_rb4187c
-      - xg29_rb4412a
-      - raytac_an54l15q_db/nrf54l15/cpuapp
-      - frdm_mcxa166
-      - frdm_mcxa276
-    integration_platforms:
-      - nucleo_l073rz
-      - nrf52840dk/nrf52840
-    harness: console
-    timeout: 10
-    harness_config:
-      type: multi_line
-      regex:
-        - "ADC reading\\[\\d+\\]:"
-        - "- .+, channel \\d+: -?\\d+"

software/apps/adc_dt/socs/esp32_procpu.overlay

@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2022 Wolter HV <wolterhv@gmx.de>
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/ {
-	zephyr,user {
-		io-channels = <&adc0 0>;
-	};
-};
-
-&adc0 {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	channel@0 {
-		reg = <0>;
-		zephyr,gain = "ADC_GAIN_1_4";
-		zephyr,reference = "ADC_REF_INTERNAL";
-		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
-		zephyr,resolution = <12>;
-	};
-};

software/apps/adc_dt/socs/esp32c3.overlay

@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2022 Wolter HV <wolterhv@gmx.de>
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/ {
-	zephyr,user {
-		io-channels = <&adc0 0>;
-	};
-};
-
-&adc0 {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	channel@0 {
-		reg = <0>;
-		zephyr,gain = "ADC_GAIN_1_4";
-		zephyr,reference = "ADC_REF_INTERNAL";
-		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
-		zephyr,resolution = <12>;
-	};
-};

software/apps/adc_dt/socs/esp32s2.overlay

@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2022 Wolter HV <wolterhv@gmx.de>
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/ {
-	zephyr,user {
-		io-channels = <&adc0 0>;
-	};
-};
-
-&adc0 {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	channel@0 {
-		reg = <0>;
-		zephyr,gain = "ADC_GAIN_1_4";
-		zephyr,reference = "ADC_REF_INTERNAL";
-		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
-		zephyr,resolution = <12>;
-	};
-};

software/apps/adc_dt/socs/esp32s3_procpu.overlay

@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2022 Wolter HV <wolterhv@gmx.de>
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-/ {
-	zephyr,user {
-		io-channels = <&adc0 0>;
-	};
-};
-
-&adc0 {
-	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	channel@0 {
-		reg = <0>;
-		zephyr,gain = "ADC_GAIN_1_4";
-		zephyr,reference = "ADC_REF_INTERNAL";
-		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
-		zephyr,resolution = <12>;
-	};
-};

software/apps/adc_dt/src/main.c

@@ -1,45 +0,0 @@
-#include <zephyr/kernel.h>
-#include <zephyr/device.h>
-#include <zephyr/devicetree.h>
-#include <zephyr/drivers/sensor.h>
-#include <zephyr/logging/log.h>
-
-LOG_MODULE_REGISTER(adc_dt_example, LOG_LEVEL_DBG);
-
-/* Get the voltage divider device */
-#define VOLTAGE_DIVIDER_NODE DT_NODELABEL(vdd_sense)
-
-int main(void)
-{
-	const struct device *vdd_dev = DEVICE_DT_GET(VOLTAGE_DIVIDER_NODE);
-	struct sensor_value val;
-	int err;
-
-	if (!device_is_ready(vdd_dev)) {
-		LOG_ERR("Voltage divider device not ready");
-		return 0;
-	}
-
-	LOG_INF("Voltage divider device ready!");
-
-	while (1) {
-		err = sensor_sample_fetch(vdd_dev);
-		if (err < 0) {
-			LOG_ERR("Could not fetch sample (%d)", err);
-			k_sleep(K_MSEC(1000));
-			continue;
-		}
-
-		err = sensor_channel_get(vdd_dev, SENSOR_CHAN_VOLTAGE, &val);
-		if (err < 0) {
-			LOG_ERR("Could not get channel (%d)", err);
-			k_sleep(K_MSEC(1000));
-			continue;
-		}
-
-		LOG_INF("Voltage reading: %d.%06d V", val.val1, val.val2);
-
-		k_sleep(K_MSEC(1000));
-	}
-	return 0;
-}

software/apps/adc_test/CMakeLists.txt

@@ -1,6 +0,0 @@
-cmake_minimum_required(VERSION 3.20)
-
-find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
-project(adc_test)
-
-target_sources(app PRIVATE src/main.c)

software/apps/adc_test/boards/weact_stm32g431_core.overlay

@@ -1,8 +0,0 @@
-&adc1 {
-    pinctrl-0 = <&adc1_in1_pa0>;
-    pinctrl-names = "default";
-    status = "okay";
-
-    st,adc-clock-source = "SYNC";
-    st,adc-prescaler = <4>;
-};

software/apps/adc_test/prj.conf

@@ -1,3 +0,0 @@
-CONFIG_ADC=y
-CONFIG_ADC_STM32=y
-CONFIG_LOG=y

software/apps/adc_test/src/main.c

@@ -1,73 +0,0 @@
-#include <zephyr/kernel.h>
-#include <zephyr/drivers/adc.h>
-#include <zephyr/device.h>
-#include <zephyr/sys/printk.h>
-
-// ADC-Knoten holen
-static const struct device *adc_dev = DEVICE_DT_GET(DT_NODELABEL(adc1));
-
-// Kanaldefinitionen
-#define MY_SIGNAL_CHANNEL   1  // PA0
-#define ADC_VREFINT_CHANNEL 18 // Intern
-
-// Puffer für ZWEI Messwerte
-static int16_t sample_buffer[2];
-
-void main(void)
-{
-    int err;
-    // Die VREFINT-Spannung in mV aus dem Datenblatt deines Controllers
-    #define VREFINT_MV 1212
-
-    printk("*** ADC Ratiometric Measurement (Single Sequence) ***\n");
-
-    if (!device_is_ready(adc_dev)) {
-        printk("ADC device not ready!\n");
-        return;
-    }
-
-    // --- Einmaliges Setup der beiden Kanäle ---
-    const struct adc_channel_cfg signal_channel_cfg = {
-        .gain             = ADC_GAIN_1,
-        .reference        = ADC_REF_INTERNAL,
-        .acquisition_time = ADC_ACQ_TIME_DEFAULT, // Kurz für niederohmige Quellen
-        .channel_id       = MY_SIGNAL_CHANNEL,
-    };
-    const struct adc_channel_cfg vrefint_channel_cfg = {
-        .gain             = ADC_GAIN_1,
-        .reference        = ADC_REF_INTERNAL,
-        .acquisition_time = ADC_ACQ_TIME_MAX, // Lang für VREFINT
-        .channel_id       = ADC_VREFINT_CHANNEL,
-    };
-
-    adc_channel_setup(adc_dev, &signal_channel_cfg);
-    adc_channel_setup(adc_dev, &vrefint_channel_cfg);
-
-    // --- EINE Sequenz, die BEIDE Kanäle enthält ---
-    const struct adc_sequence sequence = {
-        .channels    = BIT(MY_SIGNAL_CHANNEL) | BIT(ADC_VREFINT_CHANNEL),
-        .buffer      = sample_buffer,
-        .buffer_size = sizeof(sample_buffer),
-        .resolution  = 12,
-    };
-
-    while (1) {
-        err = adc_read(adc_dev, &sequence);
-        if (err != 0) {
-            printk("ADC read failed with code %d\n", err);
-        } else {
-            // Die Ergebnisse sind in der Reihenfolge der Kanalnummern im Puffer
-            // Kanal 1 (MY_SIGNAL_CHANNEL) kommt vor Kanal 18 (ADC_VREFINT_CHANNEL)
-            int16_t signal_raw = sample_buffer[0];
-            int16_t vrefint_raw = sample_buffer[1];
-
-            // Ratiometrische Berechnung
-            int32_t signal_mv = (int32_t)signal_raw * VREFINT_MV / vrefint_raw;
-
-            printk("Signal: raw=%4d  |  VREFINT: raw=%4d  |  Calculated Voltage: %d mV\n",
-                   signal_raw, vrefint_raw, signal_mv);
-        }
-
-        k_msleep(2000);
-    }
-}

software/apps/adc_test/src/main.c2

@@ -1,80 +0,0 @@
-#include <zephyr/kernel.h>
-#include <zephyr/drivers/adc.h>
-#include <zephyr/device.h>
-
-// Definiere die Kanäle
-#define ADC_VREFINT_CHANNEL 18 // Muss mit dem DTS übereinstimmen
-#define MY_SIGNAL_CHANNEL   1  // Muss mit dem pinctrl im DTS übereinstimmen
-
-// ADC Device
-static const struct device *adc_dev = DEVICE_DT_GET(DT_NODELABEL(adc1));
-
-// ADC Kanal Konfigurationen
-static const struct adc_channel_cfg vrefint_channel_cfg = {
-    .gain             = ADC_GAIN_1,
-    .reference        = ADC_REF_INTERNAL, // Bedeutet VDDA
-    .acquisition_time = ADC_ACQ_TIME_MAX,
-    .channel_id       = ADC_VREFINT_CHANNEL,
-    .differential     = 0,
-};
-
-static const struct adc_channel_cfg signal_channel_cfg = {
-    .gain             = ADC_GAIN_1,
-    .reference        = ADC_REF_INTERNAL, // Bedeutet VDDA
-    .acquisition_time = ADC_ACQ_TIME_MAX,
-    .channel_id       = MY_SIGNAL_CHANNEL,
-    .differential     = 0,
-};
-
-// Puffer für die Messwerte
-#define BUFFER_SIZE 1
-static int16_t sample_buffer[BUFFER_SIZE];
-
-// Sequenz für die Messungen
-struct adc_sequence sequence_vrefint = {
-    .channels    = BIT(ADC_VREFINT_CHANNEL),
-    .buffer      = sample_buffer,
-    .buffer_size = sizeof(sample_buffer),
-    .resolution  = 12, // STM32G4 hat 12-bit
-};
-
-struct adc_sequence sequence_signal = {
-    .channels    = BIT(MY_SIGNAL_CHANNEL),
-    .buffer      = sample_buffer,
-    .buffer_size = sizeof(sample_buffer),
-    .resolution  = 12,
-};
-
-
-void main(void) {
-    if (!device_is_ready(adc_dev)) {
-        printk("ADC device not found\n");
-        return;
-    }
-
-    // Kanäle konfigurieren
-    adc_channel_setup(adc_dev, &vrefint_channel_cfg);
-    adc_channel_setup(adc_dev, &signal_channel_cfg);
-
-    while (1) {
-        // 1. VREFINT messen zur Kalibrierung
-        adc_read(adc_dev, &sequence_vrefint);
-        int16_t vrefint_raw = sample_buffer[0];
-
-        // 2. Dein eigentliches Signal messen
-        adc_read(adc_dev, &sequence_signal);
-        int16_t signal_raw = sample_buffer[0];
-
-        // 3. Spannung berechnen
-        // VREFINT Wert für STM32G431 bei 3.0V Vdda ist typ. 1.212V (1212 mV)
-        // Überprüfe den genauen Wert im Datenblatt für deinen Controller!
-        #define VREFINT_MV 1212 
-        
-        int32_t signal_mv = (int32_t)signal_raw * VREFINT_MV / vrefint_raw;
-
-        printk("VREFINT raw: %d, Signal raw: %d, Calculated Voltage: %d mV\n", 
-               vrefint_raw, signal_raw, signal_mv);
-
-        k_msleep(1000);
-    }
-}

software/apps/adc_test/src/main.tabby

@@ -1,38 +0,0 @@
-#include <zephyr.h>
-#include <drivers/adc.h>
-
-#define PA0_PIN 0x04
-#define ADC_CHANNEL 0x03
-
-int main(void) {
-    int16_t adc_value = 0;
-
-    // Initialize the ADC
-    adc_config_t adc_config;
-    adc_config.mode = ADC_MODE_SINGLE_SHOT;
-    adc_config.channel = ADC_CHANNEL_PA0;
-    adc_config.sampling_rate = ADC_SAMP_RATE_1MS;
-
-    adc_config.data_rate = ADC_DATA_RATE_4MS;
-    adc_config.aux = ADC_AUX_ALL;
-
-    adc_config.atten = ADC_ATTEN_DB_11;
-    adc_config.ref = ADC_REF_INTERNAL;
-
-    adc_config.cal = ADC_CAL_ALL;
-
-    if (adc_config_data(&adc_config, &adc_context) < 0) {
-        zephyr_printf("Failed to configure ADC\n");
-        return -1;
-    }
-
-    // Read the analog input value
-    if (adc_read(&adc_context, &adc_value) < 0) {
-        zephyr_printf("Failed to read ADC value\n");
-        return -1;
-    }
-
-    zephyr_printf("ADC Value: %d\n", adc_value);
-
-    return 0;
-}

software/apps/bl_test/CMakeLists.txt

@@ -1,8 +1,7 @@
-# SPDX-License-Identifier: Apache-2.0
-
 cmake_minimum_required(VERSION 3.20.0)
 
 find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
-project(ADC)
+project(bl_test)
 
+# Add application source files
 target_sources(app PRIVATE src/main.c)

software/apps/bl_test/VERSION

@@ -0,0 +1,5 @@
+VERSION_MAJOR = 0
+VERSION_MINOR = 0
+PATCHLEVEL = 1
+VERSION_TWEAK = 1
+EXTRAVERSION = devel

software/apps/bl_test/prj.conf

@@ -0,0 +1,46 @@
+# Enable Console and printk for logging via UART
+CONFIG_CONSOLE=y
+CONFIG_LOG=y
+CONFIG_UART_CONSOLE=y
+
+# Enable more detailed MCUMGR logging
+CONFIG_MCUMGR_LOG_LEVEL_DBG=y
+CONFIG_IMG_MANAGER_LOG_LEVEL_DBG=y
+CONFIG_STREAM_FLASH_LOG_LEVEL_DBG=y
+
+# Enable USB for MCUMGR only
+CONFIG_USB_DEVICE_STACK=y
+CONFIG_USB_CDC_ACM=y
+CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=y
+
+# USB CDC ACM buffer configuration for better MCUMGR performance
+CONFIG_USB_CDC_ACM_RINGBUF_SIZE=1024
+
+# Set log level to info for reasonable size
+CONFIG_LOG_DEFAULT_LEVEL=3
+
+# Enable MCUMGR info logging (not debug to save space)
+CONFIG_MCUMGR_LOG_LEVEL_INF=y
+
+# Enable USB CDC info logging
+CONFIG_USB_CDC_ACM_LOG_LEVEL_INF=y
+
+# STEP 5.2 - Enable mcumgr DFU in application
+# Enable MCUMGR 
+CONFIG_MCUMGR=y  # Enable MCUMGR management for both OS and Images
+CONFIG_MCUMGR_GRP_OS=y
+CONFIG_MCUMGR_GRP_IMG=y  
+
+# Configure MCUMGR transport to UART (will use USB-CDC via chosen device)
+CONFIG_MCUMGR_TRANSPORT_UART=y
+
+# Dependencies
+# Configure dependencies for CONFIG_MCUMGR 
+CONFIG_NET_BUF=y
+CONFIG_ZCBOR=y
+CONFIG_CRC=y  # Configure dependencies for CONFIG_MCUMGR_GRP_IMG 
+CONFIG_FLASH=y
+CONFIG_IMG_MANAGER=y  # Configure dependencies for CONFIG_IMG_MANAGER 
+CONFIG_STREAM_FLASH=y
+CONFIG_FLASH_MAP=y  # Configure dependencies for CONFIG_MCUMGR_TRANSPORT_USB_CDC 
+CONFIG_BASE64=y

software/apps/bl_test/src/main.c

@@ -0,0 +1,11 @@
+#include <zephyr/kernel.h>
+#include <zephyr/logging/log.h>
+#include <app_version.h>
+
+LOG_MODULE_REGISTER(bl_test_app, LOG_LEVEL_INF);
+
+int main(void)
+{
+	LOG_INF("Hello World from bl_test! This is version %s", APP_VERSION_EXTENDED_STRING);
+	return 0;
+}

software/apps/bl_test/sysbuild.conf

@@ -0,0 +1 @@
+SB_CONFIG_BOOTLOADER_MCUBOOT=y

software/apps/bl_test/sysbuild/bl_test.overlay

@@ -0,0 +1,9 @@
+#include "common.dtsi"
+
+/* Application Configuration - Firmware wird in slot0_partition geschrieben */
+/ {
+	chosen {
+		zephyr,code-partition = &slot0_partition;
+		zephyr,uart-mcumgr = &cdc_acm_uart0;
+	};
+};

software/apps/bl_test/sysbuild/common.dtsi

@@ -0,0 +1,94 @@
+/*
+ * Common Devicetree Configuration für weact_stm32g431_core
+ * - Konfiguriert einen W25Q128 Flash-Speicher auf SPI2
+ * - Konfiguriert USB-CDC für MCUMGR
+ * - Setzt den Chip Select (CS) Pin auf PA5
+ * - Weist das Label "flash1" zu
+ */
+
+/* Partitions für internes Flash (STM32G431) */
+&flash0 {
+	/delete-node/ partitions; /* Entferne die Standard-Partitionen */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MCUboot bootloader - 48 KB */
+		boot_partition: partition@0 {
+			label = "mcuboot";
+			reg = <0x00000000 0x0000C000>;
+		};
+
+		/* Slot0 partition für primäres Application Image - 80 KB (20 sectors @ 4KB) */
+		slot0_partition: partition@C000 {
+			label = "image-0";
+			reg = <0x0000C000 0x00014000>;
+		};
+	};
+};
+
+/* USB-CDC Konfiguration für MCUMGR */
+&usb {
+	status = "okay";
+	cdc_acm_uart0: cdc_acm_uart0 {
+		compatible = "zephyr,cdc-acm-uart";
+	};
+};
+
+/ {
+	chosen {
+		zephyr,uart-mcumgr = &cdc_acm_uart0;
+	};
+};
+
+&spi2 {
+	/* Definiere die Pins für SCK, MISO, MOSI auf Port B */
+	pinctrl-0 = <&spi2_sck_pb13 &spi2_miso_pb14 &spi2_mosi_pb15>;
+	pinctrl-names = "default";
+	status = "okay";
+	
+	/* === Chip Select (CS) auf PA5 gesetzt === */
+	cs-gpios = <&gpioa 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+
+	/* Definiere den Flash-Chip als SPI NOR Gerät */
+	flash1: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		label = "flash1";
+
+		/* JEDEC ID für einen Winbond W25Q128 (16 MBytes) */
+		jedec-id = [ef 40 18];
+
+		/* Speichergröße in Bytes (16 MBytes) */
+		size = <DT_SIZE_M(16)>;
+
+		/* Maximale Taktfrequenz - angepasst an STM32G431 Limits */
+		spi-max-frequency = <1000000>;
+
+		/* Partitions für externes Flash */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* Slot1 partition für MCUboot (sekundäres Image) - 80 KB (20 sectors @ 4KB) */
+			slot1_partition: partition@0 {
+				label = "image-1";
+				reg = <0x00000000 0x00014000>;
+			};
+
+			/* Scratch partition für MCUboot - 80 KB (20 sectors @ 4KB) */
+			scratch_partition: partition@14000 {
+				label = "scratch";
+				reg = <0x00014000 0x00014000>;
+			};
+
+			/* Speicher partition für LittleFS - ~15.83 MB */
+			storage_partition: partition@28000 {
+				label = "storage";
+				reg = <0x00028000 0x00FD8000>;
+			};
+		};
+	};
+};

software/apps/bl_test/sysbuild/mcuboot.conf

@@ -0,0 +1,23 @@
+CONFIG_LOG=y
+CONFIG_MCUBOOT_LOG_LEVEL_INF=y
+
+# Enable UART console for MCUboot debug output
+CONFIG_UART_CONSOLE=y
+CONFIG_CONSOLE=y
+CONFIG_MCUBOOT_INDICATION_LED=y
+
+# Enable external SPI flash support
+CONFIG_SPI=y
+CONFIG_SPI_NOR=y
+CONFIG_SPI_NOR_SFDP_DEVICETREE=n
+CONFIG_FLASH=y
+CONFIG_FLASH_MAP=y
+CONFIG_GPIO=y
+
+# Add SPI NOR specific configurations - use 4KB page size (required by driver)
+CONFIG_SPI_NOR_FLASH_LAYOUT_PAGE_SIZE=4096
+CONFIG_SPI_NOR_INIT_PRIORITY=80
+
+# Set maximum image sectors manually since auto doesn't work with external flash
+CONFIG_BOOT_MAX_IMG_SECTORS_AUTO=n
+CONFIG_BOOT_MAX_IMG_SECTORS=80

software/apps/bl_test/sysbuild/mcuboot.overlay

@@ -0,0 +1,8 @@
+#include "common.dtsi"
+
+/* MCUboot Configuration - Bootloader wird in boot_partition geschrieben */
+/ {
+	chosen {
+		zephyr,code-partition = &boot_partition;
+	};
+};

software/apps/can_node/CMakeLists.txt

@@ -2,7 +2,9 @@ cmake_minimum_required(VERSION 3.20)
 
 find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
 
-project(firmware_node LANGUAGES C)
+project(can_node LANGUAGES C)
+
 zephyr_include_directories(../../include)
 add_subdirectory(../../lib lib)
+
 target_sources(app PRIVATE src/main.c)

software/apps/can_node/Kconfig

@@ -0,0 +1,2 @@
+rsource "../../lib/Kconfig"
+source "Kconfig.zephyr"

software/apps/can_node/VERSION

@@ -0,0 +1,5 @@
+VERSION_MAJOR = 0
+VERSION_MINOR = 0
+PATCHLEVEL = 1
+VERSION_TWEAK = 1
+EXTRAVERSION = devel

software/apps/can_node/boards/bluepill_f103rb.conf

@@ -0,0 +1,7 @@
+# Disable UART console
+CONFIG_UART_CONSOLE=n
+
+# Enable RTT console
+CONFIG_RTT_CONSOLE=y
+CONFIG_USE_SEGGER_RTT=y
+CONFIG_SHELL_BACKEND_RTT=y

software/apps/can_node/boards/bluepill_f103rb.overlay

@@ -0,0 +1,43 @@
+/ {
+    chosen {
+        zephyr,console = &rtt;
+        zephyr,shell = &rtt;
+        zephyr,settings-partition = &storage_partition;
+    };
+
+    rtt: rtt {
+        compatible = "segger,rtt-uart";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        label = "RTT";
+        status = "okay";
+    };
+};
+
+&flash0 {
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        /* Application partition starts at the beginning of flash */
+        slot0_partition: partition@0 {
+            label = "image-0";
+            reg = <0x00000000 DT_SIZE_K(120)>;
+        };
+
+        /* Use the last 8K for settings */
+        storage_partition: partition@1E000 {
+            label = "storage";
+            reg = <0x0001E000 DT_SIZE_K(8)>;
+        };
+    };
+};
+
+&usart1 {
+	modbus0 {
+		compatible = "zephyr,modbus-serial";
+		status = "okay";
+	};
+	status = "okay";
+};

software/apps/can_node/boards/native_sim.overlay

@@ -0,0 +1,47 @@
+/ {
+	aliases {
+		vnd7050aj = &vnd7050aj;
+	};
+
+	vnd7050aj: vnd7050aj {
+		compatible = "st,vnd7050aj";
+		status = "okay";
+
+		input0-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		input1-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		select0-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		select1-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		sense-enable-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		fault-reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		io-channels = <&adc0 0>;
+		r-sense-ohms = <1500>;
+		k-vcc = <4000>;
+	};
+
+	modbus_uart: uart_2 {
+		compatible = "zephyr,native-pty-uart";
+		status = "okay";
+		current-speed = <19200>;
+
+		modbus0: modbus0 {
+			compatible = "zephyr,modbus-serial";
+			status = "okay";
+		};
+	};
+
+};
+
+&adc0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ref-internal-mv = <3300>;
+	ref-external1-mv = <5000>;
+
+	channel@0 {
+		reg = <0>;
+		zephyr,gain = "ADC_GAIN_1";
+		zephyr,reference = "ADC_REF_INTERNAL";
+		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
+		zephyr,resolution = <12>;
+	};
+};

software/apps/can_node/boards/weact_stm32g431_core.overlay

@@ -0,0 +1,48 @@
+/ {
+	aliases {
+		vnd7050aj = &vnd7050aj;
+	};
+
+	vnd7050aj: vnd7050aj {
+		compatible = "st,vnd7050aj";
+		status = "okay";
+
+		input0-gpios = <&gpiob 3 GPIO_ACTIVE_HIGH>;
+		input1-gpios = <&gpiob 4 GPIO_ACTIVE_HIGH>;
+		select0-gpios = <&gpiob 0 GPIO_ACTIVE_HIGH>;
+		select1-gpios = <&gpiob 1 GPIO_ACTIVE_HIGH>;
+		sense-enable-gpios = <&gpiob 6 GPIO_ACTIVE_HIGH>;
+		fault-reset-gpios = <&gpiob 5 GPIO_ACTIVE_LOW>;
+		io-channels = <&adc1 1>;
+		r-sense-ohms = <1500>;
+		k-vcc = <4000>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&adc1_in1_pa0>;
+	pinctrl-names = "default";
+	st,adc-clock-source = "SYNC";
+	st,adc-prescaler = <4>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	channel@1 {
+		reg = <1>;
+		zephyr,gain = "ADC_GAIN_1";
+		zephyr,reference = "ADC_REF_INTERNAL";
+		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
+		zephyr,resolution = <12>;
+	};
+};
+
+&usart1 {
+	modbus0 {
+		compatible = "zephyr,modbus-serial";
+		status = "okay";
+	};
+	status = "okay";
+    pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>; // PA9=TX, PA10=RX for Modbus communication
+    pinctrl-names = "default";
+};

software/apps/can_node/cdc-acm.overlay

@@ -0,0 +1,16 @@
+#include <zephyr/dt-bindings/gpio/gpio.h>
+
+&zephyr_udc0 {
+	cdc_acm_uart0: cdc_acm_uart0 {
+		compatible = "zephyr,cdc-acm-uart";
+
+		modbus0 {
+			compatible = "zephyr,modbus-serial";
+			status = "okay";
+		};
+	};
+};
+
+&usart1 {
+	/delete-node/ modbus0;
+};

software/apps/can_node/dts/bindings/st,vnd7050aj.yaml

@@ -0,0 +1,88 @@
+# Copyright (c) 2024, Eduard Iten
+# SPDX-License-Identifier: Apache-2.0
+
+description: |
+  STMicroelectronics VND7050AJ dual-channel high-side driver.
+  This is a GPIO and ADC controlled device.
+
+compatible: "st,vnd7050aj"
+
+include: base.yaml
+
+properties:
+  input0-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO to control output channel 0.
+
+  input1-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO to control output channel 1.
+
+  select0-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO for MultiSense selection bit 0.
+
+  select1-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO for MultiSense selection bit 1.
+
+  sense-enable-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO to enable the MultiSense output.
+
+  fault-reset-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO to reset a latched fault (active-low).
+
+  io-channels:
+    type: phandle-array
+    required: true
+    description: |
+      ADC channel connected to the MultiSense pin. This should be an
+      io-channels property pointing to the ADC controller and channel number.
+
+  r-sense-ohms:
+    type: int
+    required: true
+    description: |
+      Value of the external sense resistor connected from the MultiSense
+      pin to GND, specified in Ohms. This is critical for correct
+      conversion of the analog readings.
+
+  k-factor:
+    type: int
+    default: 1500
+    description: |
+      Factor between PowerMOS and SenseMOS.
+
+  k-vcc:
+    type: int
+    default: 8000
+    description: |
+      VCC sense ratio multiplied by 1000. Used for supply voltage calculation.
+
+  t-sense-0:
+    type: int
+    default: 25
+    description: |
+      Temperature sense reference temperature in degrees Celsius.
+
+  v-sense-0:
+    type: int
+    default: 2070
+    description: |
+      Temperature sense reference voltage in millivolts.
+
+  k-tchip:
+    type: int
+    default: -5500
+    description: |
+      Temperature sense gain coefficient multiplied by 1000.
+      Used for chip temperature calculation.
+

software/apps/can_node/overlay-cdc-acm.conf

@@ -0,0 +1,4 @@
+CONFIG_USB_DEVICE_STACK=y
+CONFIG_USB_DEVICE_PRODUCT="Modbus slave node"
+CONFIG_UART_LINE_CTRL=y
+CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=n

software/apps/can_node/prj.conf

@@ -0,0 +1,31 @@
+# Enable Console and printk for logging
+CONFIG_CONSOLE=y
+CONFIG_LOG=y
+
+# Enable Shell
+CONFIG_SHELL=y
+CONFIG_REBOOT=y
+CONFIG_SHELL_MODBUS=n
+CONFIG_SHELL_VALVE=y
+CONFIG_SHELL_SYSTEM=y
+
+# Enable Settings Subsystem
+CONFIG_SETTINGS=y
+CONFIG_SETTINGS_NVS=y
+CONFIG_NVS=y
+CONFIG_FLASH=y
+CONFIG_FLASH_MAP=y
+CONFIG_FLASH_PAGE_LAYOUT=y
+
+# Config modbus
+CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_MODBUS=y
+CONFIG_MODBUS_ROLE_SERVER=y
+CONFIG_MODBUS_LOG_LEVEL_DBG=y
+
+# enable Valve Driver
+CONFIG_LIB_VALVE=y
+CONFIG_LOG_VALVE_LEVEL=4
+
+# Enable VND7050AJ
+CONFIG_VND7050AJ=y

software/apps/can_node/src/main.c

@@ -0,0 +1,40 @@
+#include <zephyr/kernel.h>
+#include <zephyr/logging/log.h>
+#include <zephyr/settings/settings.h>
+#include <app_version.h>
+#include <lib/valve.h>
+#include <lib/vnd7050aj.h>
+
+LOG_MODULE_REGISTER(main, LOG_LEVEL_INF);
+
+int main(void)
+{
+	int rc;
+	LOG_INF("Starting Irrigation System CAN Node, Version %s", APP_VERSION_EXTENDED_STRING);
+
+	/* Initialize settings subsystem */
+	rc = settings_subsys_init();
+	if (rc != 0) {
+		LOG_ERR("Failed to initialize settings subsystem (%d)", rc);
+		return rc;
+	}
+	LOG_INF("Settings subsystem initialized");
+
+	/* Load settings from storage */
+	rc = settings_load();
+	if (rc == 0) {
+		LOG_INF("Settings loaded successfully");
+	} else {
+		LOG_WRN("Failed to load settings (%d)", rc);
+	}
+
+	/* Initialize valve system */
+	rc = valve_init();
+	if (rc != 0) {
+		LOG_ERR("Failed to initialize valve system (%d)", rc);
+		return rc;
+	}
+	LOG_INF("Valve system initialized");
+
+	return 0;
+}

software/apps/can_node/sysbuild.conf

@@ -0,0 +1,5 @@
+SB_CONFIG_BOOTLOADER_MCUBOOT=y
+SB_CONFIG_MCUBOOT_MODE_SINGLE_APP=y
+
+CONFIG_LOG=y
+CONFIG_MCUBOOT_LOG_LEVEL_INF=y

software/apps/firmware_node/README.md

@@ -1,34 +0,0 @@
-# Firmware Node Application
-
-This Zephyr application provides firmware management capabilities for the irrigation system.
-
-**Tested on Zephyr 4.1.99**
-
-## Features
-
-### Step 1: Shell with Reset Command
-- Shell interface with custom "reset" command
-- Warm reboot functionality
-
-### Planned Features
-- MCUboot support with partition manager
-- Firmware version display
-- MCUmgr support for OTA updates
-
-## Building
-
-```bash
-west build -p auto -b weact_stm32g431_core apps/firmware_node -- -DBOARD_FLASH_RUNNER=blackmagicprobe
-```
-
-## Flashing
-
-```bash
-west flash
-```
-
-## Usage
-
-Connect to the device via serial console and use the shell:
-- `reset` - Reboot the system
-- `help` - Show available commands

software/apps/firmware_node/boards/flash_partitions_128kb.dtsi

@@ -1,29 +0,0 @@
-/*
- * Flash partition layout for STM32G431 (128KB total flash)
- * MCUboot + single application slot configuration
- */
-
-&flash0 {
-        partitions {
-                compatible = "fixed-partitions";
-                #address-cells = <1>;
-                #size-cells = <1>;
-
-                boot_partition: partition@0 {
-                        label = "mcuboot";
-                        reg = <0x00000000 0x0000A000>; /* 40 KB for MCUboot */
-                        read-only;
-                };
-
-                slot0_partition: partition@A000 {
-                        label = "image-0";
-                        reg = <0x0000A000 0x00016000>; /* 88 KB for application */
-                };
-        };
-};
-
-/ {
-	chosen {
-		zephyr,code-partition = &slot0_partition;
-	};
-};

software/apps/firmware_node/boards/weact_stm32g431_core.conf

@@ -1,2 +0,0 @@
-# Board specific configuration for weact_stm32g431_core
-# This file can be used for board-specific overrides if needed

software/apps/firmware_node/boards/weact_stm32g431_core.overlay

@@ -1,7 +0,0 @@
-/*
- * Copyright (c) 2021 Nordic Semiconductor ASA
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#include "flash_partitions_128kb.dtsi"

software/apps/firmware_node/boards/weact_stm32g431_core_mcuboot.overlay

@@ -1,18 +0,0 @@
-&flash0 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot_partition: partition@0 {
-			label = "mcuboot";
-			reg = <0x00000000 0x00008000>; /* 32 KB */
-			read-only;
-		};
-
-		slot0_partition: partition@8000 {
-			label = "image-0";
-			reg = <0x00008000 0x00018000>; /* 96 KB */
-		};
-	};
-};

software/apps/firmware_node/pm.yml

@@ -1,25 +0,0 @@
-# Partition manager configuration for firmware_node
-
-# Boot partition (MCUboot)
-mcuboot_primary:
-  address: 0x00000000
-  size: 0x8000
-  region: flash_primary
-
-# Application partition (primary slot)
-mcuboot_primary_app:
-  address: 0x00008000
-  size: 0x18000
-  region: flash_primary
-
-# Secondary slot for updates
-mcuboot_secondary:
-  address: 0x00020000
-  size: 0x18000
-  region: flash_primary
-
-# Settings partition
-settings_partition:
-  address: 0x00038000
-  size: 0x8000
-  region: flash_primary

software/apps/firmware_node/prj.conf

@@ -1,21 +0,0 @@
-# Enable Console and printk for logging
-CONFIG_CONSOLE=y
-CONFIG_LOG=y
-CONFIG_LOG_PROCESS_THREAD=y
-
-# Enable Shell
-CONFIG_SHELL=y
-CONFIG_REBOOT=y
-
-# Enable the reset command
-CONFIG_KERNEL_SHELL=y
-
-# Enable settings for persistent storage
-CONFIG_SETTINGS=y
-CONFIG_SETTINGS_NVS=y
-CONFIG_NVS=y
-
-# Enable Flash and Flash Map for image trailer manipulation
-CONFIG_FLASH=y
-CONFIG_FLASH_MAP=y
-CONFIG_FLASH_PAGE_LAYOUT=y

software/apps/firmware_node/src/main.c

@@ -1,167 +0,0 @@
-#include <zephyr/kernel.h>
-#include <zephyr/logging/log.h>
-#include <zephyr/shell/shell.h>
-#include <zephyr/sys/reboot.h>
-#include <zephyr/drivers/flash.h>
-#include <zephyr/storage/flash_map.h>
-#include <zephyr/devicetree.h>
-
-LOG_MODULE_REGISTER(firmware_node, LOG_LEVEL_INF);
-
-// Image header magic number (from MCUboot)
-#define IMAGE_MAGIC 0x96f3b83d
-#define IMAGE_HEADER_SIZE 32
-
-// Function to invalidate current image and trigger serial recovery
-static int invalidate_current_image(void)
-{
-    const struct flash_area *fa;
-    int rc;
-
-    // Get the flash area for the current image slot (slot0_partition)
-    rc = flash_area_open(FIXED_PARTITION_ID(slot0_partition), &fa);
-    if (rc != 0) {
-        LOG_ERR("Failed to open flash area: %d", rc);
-        return rc;
-    }
-
-    // Ensure the flash area is valid
-    if (fa->fa_id != FIXED_PARTITION_ID(slot0_partition)) {
-        LOG_ERR("Invalid flash area ID: %d", fa->fa_id);
-        flash_area_close(fa);
-        return -EINVAL;
-    }
-
-    // Get the flash device associated with this area
-    // This is necessary to perform erase operations
-
-    const struct device *flash_dev = flash_area_get_device(fa);
-    if (flash_dev == NULL) {
-        LOG_ERR("Failed to get flash device for area");
-        flash_area_close(fa);
-        return -ENODEV;
-    }
-
-    struct flash_pages_info page_info;
-    off_t last_block_offset;
-
-    // Find the last block of the flash area
-    rc = flash_get_page_info_by_offs(flash_dev, fa->fa_off + fa->fa_size - 1, &page_info);
-    if (rc != 0) {
-        LOG_ERR("Failed to get page info: %d", rc);
-        flash_area_close(fa);
-        return rc;
-    }
-
-    // Calculate the last block offset
-    rc = flash_get_page_info_by_offs(flash_dev, fa->fa_off + fa->fa_size - 1, &page_info);
-    if (rc != 0) {
-        LOG_ERR("Failed to get page info: %d", rc);
-        flash_area_close(fa);
-        return rc;
-    }
-    last_block_offset = page_info.start_offset;
-
-   // Convert absolute flash offset to relative offset within the flash area
-   off_t relative_offset = last_block_offset - fa->fa_off;
-   
-   // Erase the image trailer/metadata at the end of the partition
-   LOG_INF("Erasing image trailer at absolute offset: %ld, relative offset: %ld, size: %d bytes", 
-           last_block_offset, relative_offset, page_info.size);
-   rc = flash_area_erase(fa, relative_offset, page_info.size);
-   if (rc != 0) {
-       LOG_ERR("Failed to erase image trailer: %d", rc);
-  
-   } else {
-       LOG_INF("Image trailer erased successfully");
-   }
-   
-   flash_area_close(fa);
-   return rc;
-}
-// Custom reset command handler
-static int cmd_reset(const struct shell *shell, size_t argc, char **argv)
-{
-    ARG_UNUSED(argc);
-    ARG_UNUSED(argv);
-    
-    shell_print(shell, "Resetting system...");
-    k_msleep(100); // Give time for the message to be sent
-    sys_reboot(SYS_REBOOT_COLD);
-    
-    return 0;
-}
-
-// MCUboot serial recovery command handler
-static int cmd_recovery(const struct shell *shell, size_t argc, char **argv)
-{
-    ARG_UNUSED(argc);
-    ARG_UNUSED(argv);
-    
-    shell_print(shell, "Entering MCUboot serial recovery mode...");
-    shell_print(shell, "Corrupting current image magic to trigger recovery...");
-    
-    // Invalidate the current image by corrupting its header
-    int rc = invalidate_current_image();
-    if (rc != 0) {
-        shell_error(shell, "Failed to invalidate image: %d", rc);
-        return rc;
-    }
-    
-    shell_print(shell, "Image magic corrupted. System will reset and MCUboot will detect bad image.");
-    shell_print(shell, "MCUboot should show error and wait for recovery.");
-    k_msleep(100); // Give time for the message to be sent
-    
-    // Reset the system - MCUboot will detect invalid image and enter serial recovery
-    // log_process(true);
-    // sys_reboot(SYS_REBOOT_COLD);
-    
-    return 0;
-}
-
-// Command to show firmware info
-static int cmd_info(const struct shell *shell, size_t argc, char **argv)
-{
-    ARG_UNUSED(argc);
-    ARG_UNUSED(argv);
-    
-    const struct flash_area *fa;
-    int rc = flash_area_open(FIXED_PARTITION_ID(slot0_partition), &fa);
-    
-    if (rc != 0) {
-        shell_error(shell, "Failed to open flash area: %d", rc);
-        return rc;
-    }
-    
-    // Read the first few bytes to check the image header
-    uint32_t magic;
-    rc = flash_area_read(fa, 0, &magic, sizeof(magic));
-    if (rc == 0) {
-        shell_print(shell, "Image magic: 0x%08x", magic);
-        if (magic == IMAGE_MAGIC) {
-            shell_print(shell, "Image header is valid");
-            shell_print(shell, "Image starts at flash offset: 0x%lx", (unsigned long)fa->fa_off);
-            shell_print(shell, "Image partition size: %d bytes", fa->fa_size);
-        } else {
-            shell_print(shell, "Image header is INVALID (expected 0x%08x)", IMAGE_MAGIC);
-        }
-    } else {
-        shell_error(shell, "Failed to read image header: %d", rc);
-    }
-    
-    flash_area_close(fa);
-    return 0;
-}
-
-SHELL_CMD_REGISTER(reset, NULL, "Reset the system", cmd_reset);
-SHELL_CMD_REGISTER(recovery, NULL, "Enter MCUboot serial recovery mode", cmd_recovery);
-SHELL_CMD_REGISTER(info, NULL, "Show firmware info", cmd_info);
-
-int main(void)
-{
-    LOG_INF("Firmware Node starting up");
-    LOG_INF("Shell with reset command available");
-    LOG_INF("Serial recovery command available");
-
-    return 0;
-}

software/apps/firmware_node/sysbuild.cmake

@@ -1,4 +0,0 @@
-# Sysbuild configuration for firmware_node with MCUboot
-
-# Enable MCUboot as bootloader
-set(SB_CONFIG_BOOTLOADER_MCUBOOT TRUE)

software/apps/firmware_node/sysbuild.conf

@@ -1,5 +0,0 @@
-# Sysbuild configuration for firmware_node with MCUboot
-
-# Enable MCUboot as bootloader
-SB_CONFIG_BOOTLOADER_MCUBOOT=y
-SB_CONFIG_MCUBOOT_MODE_SINGLE_APP=y

software/apps/firmware_node/sysbuild/firmware_node.overlay

@@ -1,13 +0,0 @@
-/*
- * Copyright (c) 2021 Nordic Semiconductor ASA
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#include "../boards/flash_partitions_128kb.dtsi"
-
-/ {
-	chosen {
-		zephyr,code-partition = &slot0_partition;
-	};
-};

software/apps/firmware_node/sysbuild/mcuboot.conf

@@ -1,31 +0,0 @@
-# MCUboot configuration for firmware_node
-# Enable basic console and logging for debugging
-CONFIG_LOG=y
-CONFIG_BOOT_BANNER=y
-CONFIG_CONSOLE=y
-CONFIG_UART_CONSOLE=y
-CONFIG_PRINTK=y
-
-# Single slot configuration (no upgrades)
-CONFIG_SINGLE_APPLICATION_SLOT=y
-
-# Enable serial recovery mode (temporarily commented out for debugging)
-# CONFIG_MCUBOOT_SERIAL=y
-# CONFIG_BOOT_SERIAL_UART=y
-# CONFIG_BOOT_SERIAL_DETECT_PORT=y
-
-# Disable signature validation for testing to save space
-CONFIG_BOOT_SIGNATURE_TYPE_NONE=y
-
-# Size optimizations to fit in 40KB flash
-CONFIG_SIZE_OPTIMIZATIONS=y
-CONFIG_CBPRINTF_NANO=y
-CONFIG_MINIMAL_LIBC=y
-CONFIG_ASSERT=n
-
-# Disable debug features for size
-CONFIG_DEBUG_INFO=n
-CONFIG_DEBUG_OPTIMIZATIONS=n
-
-# Minimal heap for size optimization
-CONFIG_HEAP_MEM_POOL_SIZE=0

software/apps/firmware_node/sysbuild/mcuboot.overlay

@@ -1,12 +0,0 @@
-/*
- * MCUboot device tree overlay for firmware_node
- * Uses shared flash partition layout
- */
-
-#include "../boards/flash_partitions_128kb.dtsi"
-
-/ {
-	chosen {
-		zephyr,code-partition = &boot_partition;
-	};
-};

software/apps/firmware_node/sysbuild/mcuboot/boards/weact_stm32g431_core.overlay

@@ -1,33 +0,0 @@
-/*
- * MCUboot specific overlay for weact_stm32g431_core
- * This overlay defines flash partitions for MCUboot
- */
-
-&flash0 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot_partition: partition@0 {
-			label = "mcuboot";
-			reg = <0x00000000 0x00008000>;
-		};
-		slot0_partition: partition@8000 {
-			label = "image-0";
-			reg = <0x00008000 0x0000E000>;
-		};
-		slot1_partition: partition@16000 {
-			label = "image-1";
-			reg = <0x00016000 0x0000E000>;
-		};
-		storage_partition: partition@24000 {
-			label = "storage";
-			reg = <0x00024000 0x00004000>;
-		};
-	};
-};
-
-&chosen {
-	zephyr,boot-partition = &boot_partition;
-};

software/apps/gateway/CMakeLists.txt

@@ -1,9 +1,8 @@
-cmake_minimum_required(VERSION 3.20)
+cmake_minimum_required(VERSION 3.20.5)
-
-# Include the main 'software' directory as a module to find boards, libs, etc.
-list(APPEND ZEPHYR_EXTRA_MODULES ${CMAKE_CURRENT_SOURCE_DIR}/../..)
 
 find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
-project(gateway)
 
+project(gateway)
 target_sources(app PRIVATE src/main.c)
+
+target_include_directories(app PRIVATE include)

software/apps/gateway/README.md

@@ -0,0 +1,44 @@
+# README for the Hello World Zephyr Application
+
+## Overview
+
+This is a minimal Hello World application built using the Zephyr RTOS. The application demonstrates basic logging functionality by printing a message every 5 seconds, including the version number of the application.
+
+## Project Structure
+
+The project consists of the following files:
+
+- `src/main.c`: The entry point of the application that initializes logging and sets up a timer.
+- `include/app_version.h`: Header file that defines the application version.
+- `VERSION`: A text file containing the version number of the application.
+- `prj.conf`: Configuration file for the Zephyr project, specifying necessary options.
+- `CMakeLists.txt`: Build configuration file for CMake.
+- `README.md`: Documentation for the project.
+
+## Building the Application
+
+To build the application, follow these steps:
+
+1. Ensure you have the Zephyr development environment set up.
+2. Navigate to the `apps/gateway` directory.
+3. Run the following command to build the application:
+
+   ```
+   west build -b <your_board> .
+   ```
+
+   Replace `<your_board>` with the appropriate board name.
+
+## Running the Application
+
+After building the application, you can flash it to your board using:
+
+```
+west flash
+```
+
+Once the application is running, you will see log messages printed every 5 seconds, including the version number.
+
+## Version
+
+The version of this application can be found in the `VERSION` file and is also included in the log messages.

software/apps/gateway/VERSION

@@ -2,4 +2,4 @@ VERSION_MAJOR = 0
 VERSION_MINOR = 0
 PATCHLEVEL = 1
 VERSION_TWEAK = 0
-EXTRAVERSION = testing
+EXTRAVERSION = devel

software/apps/gateway/boards/common_4MB.dtsi

@@ -0,0 +1,16 @@
+&flash0 {
+    reg = <0x0 0x400000>; /* 4MB flash */
+};
+
+#include "espressif/partitions_0x0_default_4M.dtsi"
+
+/ {
+    chosen {
+        zephyr,shell-uart = &uart0;
+        zephyr,uart-mcumgr = &usb_serial;
+    };
+};
+
+&usb_serial {
+    status = "okay";
+};

software/apps/gateway/boards/esp32c6_devkitc_hpcore.overlay

@@ -0,0 +1 @@
+#include "common_4MB.dtsi"

software/apps/gateway/prj.conf

@@ -1,2 +1,47 @@
-# Gateway Configuration
+# -------------------
-CONFIG_NETWORKING=y
+# Logging and Console
+# -------------------
+CONFIG_LOG=y
+CONFIG_UART_CONSOLE=y
+
+# -------------
+# Zephyr Shell
+# -------------
+CONFIG_SHELL=y
+CONFIG_KERNEL_SHELL=y
+CONFIG_REBOOT=y
+
+# -------------------
+# MCUmgr OS Management
+# -------------------
+CONFIG_MCUMGR=y
+CONFIG_MCUMGR_GRP_OS=y
+CONFIG_MCUMGR_TRANSPORT_UART=y
+
+# -------------------
+# MCUmgr Filesystem Group
+# -------------------
+CONFIG_MCUMGR_GRP_FS=y
+
+# -------------------
+# LittleFS and Flash
+# -------------------
+CONFIG_FILE_SYSTEM=y
+CONFIG_FILE_SYSTEM_LITTLEFS=y
+CONFIG_FLASH=y
+CONFIG_FLASH_MAP=y
+
+# -------------------
+# Settings Subsystem
+# -------------------
+CONFIG_SETTINGS=y
+CONFIG_SETTINGS_FILE=y
+CONFIG_SETTINGS_FILE_PATH="/lfs/settings.bin"
+
+# -------------------
+# Dependencies
+# -------------------
+CONFIG_NET_BUF=y
+CONFIG_ZCBOR=y
+CONFIG_CRC=y
+CONFIG_BASE64=y

software/apps/gateway/src/main.c

@@ -1,13 +1,136 @@
-/*
+#include <zephyr/fs/fs.h>
- * Copyright (c) 2025 Eduard Iten
+#include <zephyr/fs/littlefs.h>
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
 #include <zephyr/kernel.h>
+#include <zephyr/logging/log.h>
+#include <zephyr/settings/settings.h>
+#include <zephyr/shell/shell.h>
+#include <app_version.h>
+#include <string.h>
+
+LOG_MODULE_REGISTER(hello_world);
+
+/* LittleFS mount configuration for 'storage_partition' partition */
+FS_LITTLEFS_DECLARE_DEFAULT_CONFIG(storage_partition);
+static struct fs_mount_t littlefs_mnt = {
+    .type = FS_LITTLEFS,
+    .mnt_point = "/lfs",
+    .fs_data = &storage_partition, // default config macro
+    .storage_dev = (void *)FIXED_PARTITION_ID(storage_partition),
+};
+
+static char my_setting[32] = "default";
+
+static int my_settings_set(const char *name, size_t len, settings_read_cb read_cb, void *cb_arg)
+{
+	if (strcmp(name, "value") == 0) {
+		if (len > sizeof(my_setting) - 1) {
+			len = sizeof(my_setting) - 1;
+		}
+		if (read_cb(cb_arg, my_setting, len) == len) {
+			my_setting[len] = '\0';
+			return 0;
+		}
+		return -EINVAL;
+	}
+	return -ENOENT;
+}
+
+static int my_settings_export(int (*export_func)(const char *, const void *, size_t))
+{
+	return export_func("my/setting/value", my_setting, strlen(my_setting));
+}
+
+SETTINGS_STATIC_HANDLER_DEFINE(my, "my/setting", NULL, my_settings_set, NULL, my_settings_export);
+
+static int cmd_my_get(const struct shell *shell, size_t argc, char **argv)
+{
+	shell_print(shell, "my_setting = '%s'", my_setting);
+	return 0;
+}
+
+static int cmd_my_reset(const struct shell *shell, size_t argc, char **argv)
+{
+	strcpy(my_setting, "default");
+	settings_save();
+	shell_print(shell, "my_setting reset to default");
+	return 0;
+}
+
+// Improved set command: join all arguments for whitespace support
+static int cmd_my_set(const struct shell *shell, size_t argc, char **argv)
+{
+	if (argc < 2) {
+		shell_error(shell, "Usage: my set <value>");
+		return -EINVAL;
+	}
+	// Join all argv[1..] with spaces
+	size_t i, pos = 0;
+	my_setting[0] = '\0';
+	for (i = 1; i < argc; ++i) {
+		size_t left = sizeof(my_setting) - 1 - pos;
+		if (left == 0)
+			break;
+		strncat(my_setting, argv[i], left);
+		pos = strlen(my_setting);
+		if (i < argc - 1 && left > 1) {
+			strncat(my_setting, " ", left - 1);
+			pos = strlen(my_setting);
+		}
+	}
+	my_setting[sizeof(my_setting) - 1] = '\0';
+	settings_save();
+	shell_print(shell, "my_setting set to '%s'", my_setting);
+	return 0;
+}
+
+SHELL_STATIC_SUBCMD_SET_CREATE(my_subcmds,
+    SHELL_CMD(get, NULL, "Get my_setting", cmd_my_get),
+    SHELL_CMD(set, NULL, "Set my_setting (supports spaces)", cmd_my_set),
+    SHELL_CMD(reset, NULL, "Reset my_setting to default and compact settings file", cmd_my_reset),
+    SHELL_SUBCMD_SET_END);
+
+SHELL_CMD_REGISTER(my, &my_subcmds, "My settings commands", NULL);
+
+static void compact_settings_file(void)
+{
+	struct fs_file_t file;
+	fs_file_t_init(&file);
+	int rc = fs_open(&file, "/lfs/settings.bin", FS_O_WRITE | FS_O_CREATE | FS_O_TRUNC);
+	if (rc == 0) {
+		fs_close(&file);
+		LOG_INF("Settings file compacted (truncated and recreated)");
+	} else if (rc == -ENOENT) {
+		LOG_INF("Settings file did not exist, created new");
+	} else {
+		LOG_ERR("Failed to compact settings file (%d)", rc);
+	}
+	settings_save();
+}
 
 int main(void)
 {
-	printk("Hello from Gateway!\n");
+	int rc = fs_mount(&littlefs_mnt);
+	if (rc < 0) {
+		LOG_ERR("Error mounting LittleFS [%d]", rc);
+	} else {
+		LOG_INF("LittleFS mounted at /lfs");
+	}
+
+	/* Initialize settings subsystem */
+	settings_subsys_init();
+	LOG_INF("Settings subsystem initialized");
+
+	/* Load settings from storage */
+	rc = settings_load();
+	if (rc == 0) {
+		LOG_INF("Settings loaded: my_setting='%s'", my_setting);
+	} else {
+		LOG_ERR("Failed to load settings (%d)", rc);
+	}
+
+	/* Compact settings file on each start */
+	compact_settings_file();
+
+	LOG_INF("Hello World! Version: %s", APP_VERSION_EXTENDED_STRING);
 	return 0;
-}
+}

software/apps/gateway/sysbuild.conf

@@ -0,0 +1,2 @@
+SB_CONFIG_BOOTLOADER_MCUBOOT=y
+SB_CONFIG_MCUBOOT_MODE_SINGLE_APP=y

software/apps/gateway/sysbuild/gateway.overlay

@@ -0,0 +1,8 @@
+#include "../boards/common_4MB.dtsi"
+
+/* Application Configuration - Firmware goes to slot0_partition (0x20000) */
+/ {
+    chosen {
+        zephyr,code-partition = &slot0_partition;
+    };
+};

software/apps/gateway/sysbuild/mcuboot.conf

@@ -0,0 +1,3 @@
+CONFIG_LOG=y
+CONFIG_MCUBOOT_LOG_LEVEL_INF=y
+CONFIG_UART_CONSOLE=n

software/apps/gateway/sysbuild/mcuboot.overlay

@@ -0,0 +1,12 @@
+#include "../boards/common_4MB.dtsi"
+
+/* MCUboot Configuration - Bootloader goes to boot_partition (0x0) */
+/ {
+    chosen {
+        zephyr,code-partition = &boot_partition;
+    };
+    aliases {
+        mcuboot-button0 = &user_button1;
+    };
+    
+};

software/apps/mqtt_gateway

@@ -0,0 +1 @@
+Subproject commit 6e669cfc4e400c3ef6e55c16401788ce0d804577

software/apps/slave_node/.vscode/c_cpp_properties.json

@@ -0,0 +1,12 @@
+{
+    "configurations": [
+        {
+            "name": "Linux",
+            "compileCommands": "${workspaceFolder}/build/compile_commands.json",
+            "cStandard": "c99",
+            "cppStandard": "gnu++17",
+            "intelliSenseMode": "linux-gcc-arm"
+        }
+    ],
+    "version": 4
+}

software/apps/slave_node/CMakeLists.txt

@@ -3,6 +3,8 @@ cmake_minimum_required(VERSION 3.20)
 find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
 
 project(slave_node LANGUAGES C)
+
 zephyr_include_directories(../../include)
 add_subdirectory(../../lib lib)
-target_sources(app PRIVATE src/main.c)
+
+target_sources(app PRIVATE src/main.c)

software/apps/slave_node/VERSION

@@ -0,0 +1,5 @@
+VERSION_MAJOR = 0
+VERSION_MINOR = 0
+PATCHLEVEL = 1
+VERSION_TWEAK = 1
+EXTRAVERSION = devel

software/apps/slave_node/boards/native_sim.overlay

@@ -0,0 +1,47 @@
+/ {
+	aliases {
+		vnd7050aj = &vnd7050aj;
+	};
+
+	vnd7050aj: vnd7050aj {
+		compatible = "st,vnd7050aj";
+		status = "okay";
+
+		input0-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		input1-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		select0-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		select1-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		sense-enable-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		fault-reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		io-channels = <&adc0 0>;
+		r-sense-ohms = <1500>;
+		k-vcc = <4000>;
+	};
+
+	modbus_uart: uart_2 {
+		compatible = "zephyr,native-pty-uart";
+		status = "okay";
+		current-speed = <19200>;
+
+		modbus0: modbus0 {
+			compatible = "zephyr,modbus-serial";
+			status = "okay";
+		};
+	};
+
+};
+
+&adc0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ref-internal-mv = <3300>;
+	ref-external1-mv = <5000>;
+
+	channel@0 {
+		reg = <0>;
+		zephyr,gain = "ADC_GAIN_1";
+		zephyr,reference = "ADC_REF_INTERNAL";
+		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
+		zephyr,resolution = <12>;
+	};
+};

software/apps/slave_node/boards/weact_stm32g431_core.overlay

@@ -1,16 +1,40 @@
 / {
-    vnd7050aj: vnd7050aj {
+	aliases {
-        compatible = "vnd7050aj-valve-controller";
+		vnd7050aj = &vnd7050aj;
-        status = "okay";
+	};
-        
+
-        // VND7050AJ GPIO pin definitions
+	vnd7050aj: vnd7050aj {
-        in0-gpios = <&gpiob 7 GPIO_ACTIVE_HIGH>; // IN0 (PB7) - Input 0 control signal
+		compatible = "st,vnd7050aj";
-        in1-gpios = <&gpiob 9 GPIO_ACTIVE_HIGH>; // IN1 (PB9) - Input 1 control signal
+		status = "okay";
-        rst-gpios = <&gpiob 3 GPIO_ACTIVE_HIGH>; // RST (PB3) - Reset pin for VND7050AJ
+
-        sen-gpios = <&gpiob 4 GPIO_ACTIVE_HIGH>; // SEN (PB4) - Sense Enable for current monitoring
+		input0-gpios = <&gpiob 3 GPIO_ACTIVE_HIGH>;
-        s0-gpios = <&gpiob 6 GPIO_ACTIVE_HIGH>;  // S0 (PB6) - Status/Select 0 output from VND7050AJ
+		input1-gpios = <&gpiob 4 GPIO_ACTIVE_HIGH>;
-        s1-gpios = <&gpiob 5 GPIO_ACTIVE_HIGH>;  // S1 (PB5) - Status/Select 1 output from VND7050AJ
+		select0-gpios = <&gpiob 7 GPIO_ACTIVE_HIGH>;
-    };
+		select1-gpios = <&gpiob 9 GPIO_ACTIVE_HIGH>;
+		sense-enable-gpios = <&gpiob 6 GPIO_ACTIVE_HIGH>;
+		fault-reset-gpios = <&gpiob 5 GPIO_ACTIVE_LOW>;
+		io-channels = <&adc1 1>;
+		r-sense-ohms = <1500>;
+		k-vcc = <4000>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&adc1_in1_pa0>;
+	pinctrl-names = "default";
+	st,adc-clock-source = "SYNC";
+	st,adc-prescaler = <4>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	channel@1 {
+		reg = <1>;
+		zephyr,gain = "ADC_GAIN_1";
+		zephyr,reference = "ADC_REF_INTERNAL";
+		zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
+		zephyr,resolution = <12>;
+	};
 };
 
 &usart1 {
@@ -22,43 +46,3 @@
     pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>; // PA9=TX, PA10=RX for Modbus communication
     pinctrl-names = "default";
 };
-
-&adc1 {
-    status = "okay";
-    pinctrl-0 = <&adc1_in1_pa0 &adc1_in15_pb0>;
-    pinctrl-names = "default";
-    st,adc-clock-source = "SYNC";
-    st,adc-prescaler = <1>;
-    #address-cells = <1>;
-    #size-cells = <0>;
-
-    channel@1 {
-        reg = <1>;
-        zephyr,gain = "ADC_GAIN_1";
-        zephyr,reference = "ADC_REF_INTERNAL";
-        zephyr,acquisition-time = <ADC_ACQ_TIME_MAX>;  // Use maximum acquisition time for stability
-        zephyr,resolution = <12>;
-        zephyr,vref-mv = <2048>;  // STM32G431 VREFBUF at 2.048V
-    };
-
-    channel@15 {
-        reg = <15>;
-        zephyr,gain = "ADC_GAIN_1";
-        zephyr,reference = "ADC_REF_INTERNAL";
-        zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
-        zephyr,resolution = <12>;
-        zephyr,vref-mv = <2048>;  // STM32G431 VREFBUF at 2.048V
-    };
-};
-
-&pinctrl {
-    // Pinmux für PA0 als ADC1_IN1 (Analogmodus)
-    adc1_in1_pa0: adc1_in1_pa0 {
-        pinmux = <STM32_PINMUX('A', 0, ANALOG)>; // PA0 in den Analogmodus setzen
-    };
-
-    // Pinmux für PB0 als ADC1_IN15 (Analogmodus) - for lab supply testing
-    adc1_in15_pb0: adc1_in15_pb0 {
-        pinmux = <STM32_PINMUX('B', 0, ANALOG)>; // PB0 in den Analogmodus setzen
-    };
-};

software/apps/slave_node/cdc-acm.overlay

@@ -1,3 +1,5 @@
+#include <zephyr/dt-bindings/gpio/gpio.h>
+
 &zephyr_udc0 {
 	cdc_acm_uart0: cdc_acm_uart0 {
 		compatible = "zephyr,cdc-acm-uart";

software/apps/slave_node/dts/bindings/st,vnd7050aj.yaml

@@ -0,0 +1,88 @@
+# Copyright (c) 2024, Eduard Iten
+# SPDX-License-Identifier: Apache-2.0
+
+description: |
+  STMicroelectronics VND7050AJ dual-channel high-side driver.
+  This is a GPIO and ADC controlled device.
+
+compatible: "st,vnd7050aj"
+
+include: base.yaml
+
+properties:
+  input0-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO to control output channel 0.
+
+  input1-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO to control output channel 1.
+
+  select0-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO for MultiSense selection bit 0.
+
+  select1-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO for MultiSense selection bit 1.
+
+  sense-enable-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO to enable the MultiSense output.
+
+  fault-reset-gpios:
+    type: phandle-array
+    required: true
+    description: GPIO to reset a latched fault (active-low).
+
+  io-channels:
+    type: phandle-array
+    required: true
+    description: |
+      ADC channel connected to the MultiSense pin. This should be an
+      io-channels property pointing to the ADC controller and channel number.
+
+  r-sense-ohms:
+    type: int
+    required: true
+    description: |
+      Value of the external sense resistor connected from the MultiSense
+      pin to GND, specified in Ohms. This is critical for correct
+      conversion of the analog readings.
+
+  k-factor:
+    type: int
+    default: 1500
+    description: |
+      Factor between PowerMOS and SenseMOS.
+
+  k-vcc:
+    type: int
+    default: 8000
+    description: |
+      VCC sense ratio multiplied by 1000. Used for supply voltage calculation.
+
+  t-sense-0:
+    type: int
+    default: 25
+    description: |
+      Temperature sense reference temperature in degrees Celsius.
+
+  v-sense-0:
+    type: int
+    default: 2070
+    description: |
+      Temperature sense reference voltage in millivolts.
+
+  k-tchip:
+    type: int
+    default: -5500
+    description: |
+      Temperature sense gain coefficient multiplied by 1000.
+      Used for chip temperature calculation.
+

software/apps/slave_node/dts/bindings/vnd7050aj-valve-controller.yaml

@@ -1,35 +0,0 @@
-# VND7050AJ Valve Controller binding
-description: VND7050AJ valve controller GPIO configuration
-
-compatible: "vnd7050aj-valve-controller"
-
-properties:
-  in0-gpios:
-    type: phandle-array
-    description: GPIO for IN0 control signal
-    required: true
-
-  in1-gpios:
-    type: phandle-array
-    description: GPIO for IN1 control signal
-    required: true
-
-  rst-gpios:
-    type: phandle-array
-    description: GPIO for reset pin
-    required: true
-
-  sen-gpios:
-    type: phandle-array
-    description: GPIO for sense enable pin
-    required: true
-
-  s0-gpios:
-    type: phandle-array
-    description: GPIO for select 0 pin
-    required: true
-
-  s1-gpios:
-    type: phandle-array
-    description: GPIO for select 1 pin
-    required: true

software/apps/slave_node/prj.conf

@@ -5,6 +5,9 @@ CONFIG_LOG=y
 # Enable Shell
 CONFIG_SHELL=y
 CONFIG_REBOOT=y
+CONFIG_SHELL_MODBUS=y
+CONFIG_SHELL_VALVE=y
+CONFIG_SHELL_SYSTEM=y
 
 # Enable Settings Subsystem
 CONFIG_SETTINGS=y
@@ -19,9 +22,7 @@ CONFIG_SETTINGS_LOG_LEVEL_DBG=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_MODBUS=y
 CONFIG_MODBUS_ROLE_SERVER=y
-CONFIG_MODBUS_BUFFER_SIZE=256
+CONFIG_MODBUS_LOG_LEVEL_DBG=y
-
-# Enable ADC driver
-CONFIG_ADC=y
-CONFIG_ADC_STM32=y
 
+# Enable VND7050AJ
+CONFIG_VND7050AJ=y

software/apps/slave_node/src/main.c

@@ -1,14 +1,15 @@
 #include <zephyr/kernel.h>
-#include <zephyr/settings/settings.h>
 #include <zephyr/logging/log.h>
+#include <zephyr/settings/settings.h>
+#include <lib/fwu.h>
 #include <lib/modbus_server.h>
 #include <lib/valve.h>
-#include <lib/fwu.h>
 
 LOG_MODULE_REGISTER(main, LOG_LEVEL_INF);
 
 int main(void)
 {
+	int rc;
 	LOG_INF("Starting Irrigation System Slave Node");
 
 	if (settings_subsys_init() || settings_load()) {
@@ -18,18 +19,12 @@ int main(void)
 	valve_init();
 	fwu_init();
 
-	if (modbus_server_init()) {
+	rc = modbus_server_init();
-		LOG_ERR("Modbus RTU server initialization failed");
+	if (rc) {
-		return 0;
+		LOG_ERR("Modbus server initialization failed: %d", rc);
+		return rc;
 	}
-	
+
-	// Test supply voltage reading periodically
-	while (1) {
-		uint16_t supply_voltage = valve_get_supply_voltage();
-		LOG_INF("Supply voltage: %u mV", supply_voltage);
-		k_msleep(5000);  // Read every 5 seconds
-	}
-	
 	LOG_INF("Irrigation System Slave Node started successfully");
 	return 0;
 }

software/apps/slave_node/sysbuild.conf

@@ -0,0 +1,5 @@
+SB_CONFIG_BOOTLOADER_MCUBOOT=y
+SB_CONFIG_MCUBOOT_MODE_SINGLE_APP=y
+
+CONFIG_LOG=y
+CONFIG_MCUBOOT_LOG_LEVEL_INF=y

software/apps/snippets/bootloader/CMakeLists.txt

@@ -1,8 +0,0 @@
-cmake_minimum_required(VERSION 3.20)
-
-find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
-
-project(bootloader LANGUAGES C)
-zephyr_include_directories(../../../include)
-add_subdirectory(../../../lib lib)
-target_sources(app PRIVATE src/main.c)

software/apps/snippets/bootloader/README.md

@@ -1,34 +0,0 @@
-# Firmware Node Application
-
-This Zephyr application provides firmware management capabilities for the irrigation system.
-
-**Tested on Zephyr 4.1.99**
-
-## Features
-
-### Step 1: Shell with Reset Command
-- Shell interface with custom "reset" command
-- Warm reboot functionality
-
-### Planned Features
-- MCUboot support with partition manager
-- Firmware version display
-- MCUmgr support for OTA updates
-
-## Building
-
-```bash
-west build -p auto -b weact_stm32g431_core apps/firmware_node -- -DBOARD_FLASH_RUNNER=blackmagicprobe
-```
-
-## Flashing
-
-```bash
-west flash
-```
-
-## Usage
-
-Connect to the device via serial console and use the shell:
-- `reset` - Reboot the system
-- `help` - Show available commands

software/apps/snippets/bootloader/erase.sh

@@ -1,8 +0,0 @@
-#!/bin/bash
-/home/edi/zephyr-sdk-0.17.1/arm-zephyr-eabi/bin/arm-zephyr-eabi-gdb \
-	-ex 'target extended-remote /dev/ttyACM0' \
-	-ex 'monitor swdp_scan' \
-	-ex 'attach 1' \
-	-ex 'monitor erase_mass' \
-	-ex 'detach' \
-	-ex 'quit' \

software/apps/snippets/bootloader/prj.conf

@@ -1,16 +0,0 @@
-CONFIG_SHELL=y
-CONFIG_REBOOT=y
-
-# MCUboot support for recovery request function
-CONFIG_MCUBOOT_BOOTUTIL_LIB=y
-CONFIG_MCUBOOT_IMG_MANAGER=y
-CONFIG_IMG_MANAGER=y
-
-# Flash and Stream Configuration (required for IMG_MANAGER)
-CONFIG_FLASH=y
-CONFIG_STREAM_FLASH=y
-
-# Retention system
-CONFIG_RETENTION=y
-CONFIG_RETENTION_BOOT_MODE=y
-CONFIG_RETAINED_MEM=y

software/apps/snippets/bootloader/src/main.c

@@ -1,42 +0,0 @@
-#include <zephyr/kernel.h>
-#include <app_version.h>
-#include <zephyr/shell/shell.h>
-#include <zephyr/sys/reboot.h>
-#include <zephyr/dfu/mcuboot.h>
-#include <zephyr/retention/bootmode.h>
-#include <stdlib.h>
-
-/* Shell command handler for "reset" */
-static int cmd_reset(const struct shell *sh, size_t argc, char **argv)
-{
-    shell_print(sh, "Rebooting system...");
-    k_sleep(K_MSEC(100)); // Optional delay for user to see the message
-    sys_reboot(SYS_REBOOT_WARM);
-    return 0;
-}
-
-static int cmd_download(const struct shell *sh, size_t argc, char **argv)
-{
-    int rc;
-    
-    /* Set boot mode to serial recovery */
-    rc = bootmode_set(BOOT_MODE_TYPE_BOOTLOADER);
-    if (rc < 0) {
-        shell_error(sh, "Failed to set boot mode: %d", rc);
-        return rc;
-    }
-    
-    shell_print(sh, "Boot mode set to recovery. Rebooting to bootloader...");
-    k_sleep(K_MSEC(100));
-    sys_reboot(SYS_REBOOT_WARM);
-    return 0;
-}
-
-/* Register the shell command */
-SHELL_CMD_REGISTER(reset, NULL, "Reboot the system", cmd_reset);
-SHELL_CMD_REGISTER(download, NULL, "Download firmware", cmd_download);
-
-int main(void){
-    printk("Bootloader test version %s\n", APP_VERSION_EXTENDED_STRING);
-    return 0;
-}

software/apps/snippets/bootloader/sysbuild.conf

@@ -1,5 +0,0 @@
-# Sysbuild configuration for firmware_node with MCUboot
-
-# Enable MCUboot as bootloader
-SB_CONFIG_BOOTLOADER_MCUBOOT=y
-SB_CONFIG_MCUBOOT_MODE_SINGLE_APP=y

software/apps/snippets/bootloader/sysbuild/bootloader.overlay

@@ -1,13 +0,0 @@
-/*
- * Copyright (c) 2021 Nordic Semiconductor ASA
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#include "flash_partitions_128kb.dtsi"
-
-/ {
-	chosen {
-		zephyr,code-partition = &slot0_partition;
-	};
-};

software/apps/snippets/bootloader/sysbuild/flash_partitions_128kb.dtsi

@@ -1,62 +0,0 @@
-/*
- * Devicetree Overlay for 128KB Flash
- * - MCUboot Bootloader (32KB)
- * - Application Slot (96KB)
- */
-
-&flash0 {
-        /delete-node/ partitions;
-        partitions {
-                compatible = "fixed-partitions";
-                #address-cells = <1>;
-                #size-cells = <1>;
-
-                boot_partition: partition@0 {
-                        label = "mcuboot";
-                        reg = <0x00000000 DT_SIZE_K(32)>;
-                        read-only;
-                };
-
-                slot0_partition: partition@8000 {
-                        label = "image-0";
-                        reg = <0x00008000 DT_SIZE_K(96)>;
-                };
-        };
-};
-
-/* Add retention memory to the existing SRAM node */
-&sram0 {
-        #address-cells = <1>;
-        #size-cells = <1>;
-        
-        retainedmem {
-                compatible = "zephyr,retained-ram";
-                status = "okay";
-                #address-cells = <1>;
-                #size-cells = <1>;
-                
-                boot_mode: retention@7f00 {
-                        compatible = "zephyr,retention";
-                        status = "okay";
-                        reg = <0x7f00 0x100>;
-                        prefix = [08 04];
-                        checksum = <1>;
-                };
-        };
-};
-
-/ {
-        chosen {
-                zephyr,boot-mode = &boot_mode;
-                zephyr,console = &cdc_acm_uart0;
-    };
-};
-
-&zephyr_udc0 {
-    status = "okay";
-    
-    cdc_acm_uart0: cdc_acm_uart0 {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
-};

software/apps/snippets/bootloader/sysbuild/mcuboot.conf

@@ -1,46 +0,0 @@
-#
-# MCUboot Configuration for Serial Recovery over USB-CDC
-#
-
-# Enables serial recovery mode in MCUboot.
-CONFIG_MCUBOOT_SERIAL=y
-
-# Tell MCUboot to check for a trigger to enter recovery
-CONFIG_BOOT_SERIAL_BOOT_MODE=y
-
-# --- USB Stack Configuration ---
-CONFIG_USB_DEVICE_STACK=y
-CONFIG_USB_DEVICE_PRODUCT="MCUboot Serial Recovery"
-
-# Use USB CDC ACM for MCUboot serial recovery (not UART)
-CONFIG_BOOT_SERIAL_CDC_ACM=y
-
-# --- Disable Zephyr Console to avoid conflicts ---
-# MCUboot's serial_adapter doesn't work well with the general console subsystem.
-CONFIG_UART_CONSOLE=n
-CONFIG_CONSOLE_HANDLER=n
-CONFIG_CONSOLE=n
-
-# --- Flash and Stream Configuration (required for IMG_MANAGER) ---
-CONFIG_FLASH=y
-CONFIG_STREAM_FLASH=y
-
-# --- mcumgr Configuration ---
-# MCUMGR requires NET_BUF, even for serial transport.
-CONFIG_NET_BUF=y
-CONFIG_NET_LOG=n
-
-# Enables the mcumgr library and necessary command handlers
-CONFIG_MCUMGR=y
-CONFIG_IMG_MANAGER=y
-CONFIG_MCUMGR_GRP_IMG=y
-CONFIG_MCUMGR_GRP_OS=y
-
-# --- Retention Configuration ---
-CONFIG_RETAINED_MEM=y
-CONFIG_RETENTION=y
-CONFIG_RETENTION_BOOT_MODE=y
-
-# --- Optional: Reduce memory usage ---
-CONFIG_MAIN_STACK_SIZE=2048
-CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=1024

software/apps/snippets/bootloader/sysbuild/mcuboot.overlay

@@ -1,17 +0,0 @@
-#include "flash_partitions_128kb.dtsi"
-
-/ {
-    chosen {
-        zephyr,code-partition = &boot_partition;
-        zephyr,console = &cdc_acm_uart0;
-    };
-};
-
-&zephyr_udc0 {
-    status = "okay";
-    
-    cdc_acm_uart0: cdc_acm_uart0 {
-        compatible = "zephyr,cdc-acm-uart";
-        label = "CDC_ACM_0";
-    };
-};

software/esphome/.gitignore

@@ -0,0 +1,5 @@
+# Gitignore settings for ESPHome
+# This is an example and may include too much for your use-case.
+# You can modify this file to suit your needs.
+/.esphome/
+/secrets.yaml

software/esphome/can.yaml

@@ -0,0 +1,106 @@
+# ===================================================================
+# ESPHome Configuration
+# CAN-Bus Master für ein Bewässerungssystem auf Basis des ESP32-C6
+#
+# Version 10: Finale Korrektur der Lambda-Signatur gemäß Dokumentation
+# ===================================================================
+
+esphome:
+  name: can-bridge
+  friendly_name: Irrigation can bridge
+
+esp32:
+  board: esp32-c6-devkitm-1
+  framework:
+    type: esp-idf # Erforderlich für den ESP32-C6
+
+# --- Netzwerk & Sicherheit ---
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  fast_connect: true
+
+api:
+  encryption:
+    key: !secret api_key
+
+ota:
+  platform: esphome
+  password: !secret ota_password
+
+logger:
+
+web_server:
+
+# --- Globale Variablen ---
+globals:
+  - id: ventil_2_can_state
+    type: int
+    initial_value: '0' # Startet als "geschlossen"
+
+# --- CAN-Bus Konfiguration ---
+canbus:
+  - platform: esp32_can
+    id: my_can_bus
+    tx_pin: GPIO5
+    rx_pin: GPIO4
+    bit_rate: 125kbps
+    can_id: 0x000 # Erforderlich, um Parser-Fehler zu beheben.
+    on_frame:
+      # Horcht nur auf die Statusmeldung von Knoten 2 (ID 0x422)
+      - can_id: 0x422
+        then:
+          - lambda: |-
+              if (x.size() < 1) {
+                ESP_LOGW("on_can_frame", "Received empty Frame for ID 0x422");
+                return;
+              }
+              int received_state = x[0];
+              id(ventil_2_can_state) = received_state;
+              ESP_LOGD("on_can_frame", "Received state from Valve 2: %i", received_state);
+          - valve.template.publish:
+              id: ventil_2
+              current_operation: !lambda |-
+                int state = id(ventil_2_can_state);
+                if (state == 2) {
+                  return VALVE_OPERATION_OPENING;
+                } else if (state == 3) {
+                  return VALVE_OPERATION_CLOSING;
+                } else {
+                  return VALVE_OPERATION_IDLE;
+                }
+
+# --- Home Assistant Entitäten ---
+valve:
+  - platform: template
+    name: "Ventil 2"
+    id: ventil_2
+    
+    # Diese Lambda meldet nur den binären End-Zustand (offen/geschlossen)
+    lambda: |-
+      if (id(ventil_2_can_state) == 0) {
+        return VALVE_CLOSED;
+      } else if (id(ventil_2_can_state) == 1) {
+        return VALVE_OPEN;
+      } else {
+        return NAN;
+      }
+
+    # Aktionen zum Steuern des Ventils
+    open_action:
+      - canbus.send:
+          canbus_id: my_can_bus
+          can_id: 0x210
+          data: [0x02, 0x01]
+
+    close_action:
+      - canbus.send:
+          canbus_id: my_can_bus
+          can_id: 0x210
+          data: [0x02, 0x00]
+
+    stop_action:
+      - canbus.send:
+          canbus_id: my_can_bus
+          can_id: 0x210
+          data: [0x02, 0x03]

software/esphome/create_secrets.py

@@ -0,0 +1,55 @@
+#!/usr/bin/env python3
+
+import secrets
+import string
+import os
+import base64
+from ruamel.yaml import YAML
+
+def generate_password(length=32):
+    """Generate a random password."""
+    alphabet = string.ascii_letters + string.digits
+    return ''.join(secrets.choice(alphabet) for i in range(length))
+
+def generate_api_key():
+    """Generate a random 32-byte key and base64 encode it."""
+    return base64.b64encode(secrets.token_bytes(32)).decode('utf-8')
+
+SECRETS_FILE = 'secrets.yaml'
+# In a real ESPHome project, secrets are often included from a central location
+# but for this script, we'll assume it's in the current directory.
+# You might need to adjust this path.
+secrets_path = os.path.join(os.path.dirname(os.path.abspath(__file__)), SECRETS_FILE)
+
+yaml = YAML()
+yaml.preserve_quotes = True
+# To prevent line wrapping
+yaml.width = 4096
+
+try:
+    with open(secrets_path, 'r') as f:
+        secrets_data = yaml.load(f)
+    if secrets_data is None:
+        secrets_data = {}
+except FileNotFoundError:
+    print(f"Info: '{SECRETS_FILE}' not found. A new file will be created.")
+    secrets_data = {}
+
+# Generate new random passwords
+new_api_key = generate_api_key()
+new_ota_password = generate_password()
+
+# Update the dictionary with the new passwords
+if 'api_password' in secrets_data:
+    del secrets_data['api_password']
+secrets_data['api_key'] = new_api_key
+secrets_data['ota_password'] = new_ota_password
+
+# Write the updated dictionary back to the YAML file
+with open(secrets_path, 'w') as f:
+    yaml.dump(secrets_data, f)
+
+print(f"Successfully updated '{SECRETS_FILE}'.")
+print("New values:")
+print(f"  api_key: {new_api_key}")
+print(f"  ota_password: {new_ota_password}")

software/esphome/irrigation_system.yaml

@@ -0,0 +1,166 @@
+# ===================================================================
+# ESPHome Configuration - Final Version
+#
+# This version corrects the C++ function call inside the valve actions
+# to use the correct `send` method from the ModbusDevice base class,
+# which is compatible with the esp-idf framework.
+# ===================================================================
+
+esphome:
+  name: irrigation-system
+  friendly_name: Bewässerung
+
+esp32:
+  board: esp32-c6-devkitm-1
+  framework:
+    type: esp-idf # Set to esp-idf as required by the ESP32-C6 board
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  fast_connect: true
+
+api:
+  encryption:
+    key: !secret api_key
+
+ota:
+  platform: esphome
+  password: !secret ota_password
+
+logger:
+
+web_server:
+
+# ===================================================================
+# HARDWARE SETUP - COMPLETE
+# ===================================================================
+
+# --- UART for RS485 Communication ---
+uart:
+  id: uart_bus
+  tx_pin: GPIO1
+  rx_pin: GPIO2
+  baud_rate: 9600
+  data_bits: 8
+  stop_bits: 1
+  parity: NONE
+
+# --- Base Modbus component for the bus ---
+modbus:
+  - id: modbus_hub
+    uart_id: uart_bus
+
+# --- Modbus Controller for the specific valve device ---
+modbus_controller:
+  - id: valve_controller
+    modbus_id: modbus_hub
+    address: 0 # The Modbus address of your valve. Change if not 0.
+    # update_interval: 1s
+
+# ===================================================================
+# SENSORS - COMPLETE
+# ===================================================================
+sensor:
+  # This sensor reads the raw 16-bit value from the valve's input register.
+  - platform: modbus_controller
+    modbus_controller_id: valve_controller
+    name: "Valve Raw Status"
+    id: valve_raw_status
+    internal: true # Hide from Home Assistant UI
+    register_type: read # 'read' is the valid type for input registers
+    address: 0x0000 # The address of the register to read
+    value_type: U_WORD # Read the full 16-bit unsigned word
+  - platform: modbus_controller
+    modbus_controller_id: valve_controller
+    name: "VDD"
+    id: valve_vdd
+    register_type: read # 'read' is the valid type for input registers
+    address: 0x00FC # The address of the register to read
+    value_type: U_WORD # Read the full 16-bit unsigned word
+    entity_category: diagnostic # Mark as diagnostic
+    unit_of_measurement: "V"
+    accuracy_decimals: 2 # Show two decimal places
+    # Apply filters to convert the raw value to volts and update periodically
+    filters:
+      - lambda: |-
+          // Convert the raw VDD value to volts
+          return x / 1000.0; // Assuming the value is in millivolts
+      - heartbeat: 60s # Update every 60 seconds
+      - delta: 200 # Only update if the value changes by more than 200 mV
+
+# ===================================================================
+# TEXT SENSORS FOR HUMAN-READABLE STATUS
+# ===================================================================
+text_sensor:
+  # 1. This text sensor extracts the HIGH BYTE for the operation status.
+  - platform: template
+    name: "Valve Operation"
+    id: valve_operation_status
+    icon: "mdi:state-machine"
+    lambda: |-
+      // Extract the high byte from the raw status sensor
+      // using a bitwise right shift.
+      int operation_code = (int)id(valve_raw_status).state >> 8;
+      switch (operation_code) {
+        case 0: return {"Idle"};
+        case 1: return {"Opening"};
+        case 2: return {"Closing"};
+        case 3: return {"Obstacle Detected"};
+        case 4: return {"End Position Not Reached"};
+        default: return {"Unknown Operation"};
+      }
+
+  # 2. This text sensor extracts the LOW BYTE for the current valve state.
+  - platform: template
+    name: "Valve Position"
+    id: valve_position_status
+    icon: "mdi:valve"
+    lambda: |-
+      // Extract the low byte from the raw status sensor
+      // using a bitwise AND mask.
+      int state_code = (int)id(valve_raw_status).state & 0xFF;
+      switch (state_code) {
+        case 0: return {"Closed"};
+        case 1: return {"Open"};
+        default: return {"Unknown"};
+      }
+
+# ===================================================================
+# THE MAIN VALVE COMPONENT
+# ===================================================================
+valve:
+  - platform: template
+    name: "Modbus Controlled Valve"
+    id: modbus_valve
+    optimistic: false
+    # The lambda determines the current state (open or closed) of the valve.
+    lambda: |-
+      int state_code = (int)id(valve_raw_status).state & 0xFF;
+      if (state_code == 1) {
+        return true; // Open
+      } else if (state_code == 0) {
+        return false; // Closed
+      } else {
+        return {}; // Unknown
+      }
+    # Action to execute when the "OPEN" button is pressed.
+    open_action:
+      - lambda: |-
+          // Use the send() command inherited from ModbusDevice
+          // Function 0x06: Write Single Register
+          // Payload for value 1 is {0x00, 0x01}
+          const uint8_t data[] = {0x00, 0x01};
+          id(valve_controller).send(0x06, 0x0000, 1, 2, data);
+    # Action to execute when the "CLOSE" button is pressed.
+    close_action:
+      - lambda: |-
+          // Payload for value 2 is {0x00, 0x02}
+          const uint8_t data[] = {0x00, 0x02};
+          id(valve_controller).send(0x06, 0x0000, 1, 2, data);
+    # Action to execute when the "STOP" button is pressed.
+    stop_action:
+      - lambda: |-
+          // Payload for value 3 is {0x00, 0x03}
+          const uint8_t data[] = {0x00, 0x03};
+          id(valve_controller).send(0x06, 0x0000, 1, 2, data);

software/esphome/requirements.txt

@@ -0,0 +1,2 @@
+ruamel.yaml
+esphome