feat(modbus): Implement persistent and improved reconfiguration for Modbus server

This commit enhances the Modbus server's configuration handling by:

- Loading saved baudrate and unit ID settings during initialization, ensuring persistence across reboots.
- Providing improved feedback during `modbus_reconfigure`, including logging for successful changes and informing the user when a device restart is required for changes to take effect.
- Saving new configuration settings even if immediate reinitialization fails, allowing them to be applied on the next boot.

.vscode/settings.json

@@ -0,0 +1,5 @@
+{
+    "files.associations": {
+        "fwu.h": "c"
+    }
+}

docs/modbus-registers.de.md

@@ -38,6 +38,7 @@ Alle Register sind in einer einzigen, durchgehenden Liste pro Register-Typ (`Inp
 | **0x00F2** | `DEVICE_STATUS`                | System            | `0`=OK, `1`=Allgemeiner Fehler.                                                                                                           |
 | **0x00F3** | `UPTIME_SECONDS_LOW`           | System            | Untere 16 Bit der Uptime in Sekunden.                                                                                                     |
 | **0x00F4** | `UPTIME_SECONDS_HIGH`          | System            | Obere 16 Bit der Uptime.                                                                                                                  |
+| **0x00F5** | `SUPPLY_VOLTAGE_MV`            | System            | Aktuelle Versorgungsspannung in Millivolt (mV).                                                                                           |
 | **0x0100** | `FWU_LAST_CHUNK_CRC`           | Firmware-Update   | Enthält den CRC16 des zuletzt im Puffer empfangenen Daten-Chunks.                                                                         |
 
 ## 3. Holding Registers (4xxxx, Read/Write)

software/CMakeLists.txt

@@ -1,8 +0,0 @@
-cmake_minimum_required(VERSION 3.13.1)
-
-project(software)
-
-add_subdirectory(modules/modbus_server)
-add_subdirectory(modules/valve)
-add_subdirectory(modules/fwu)
-add_subdirectory(apps/stm32g431_tests)

software/Kconfig

@@ -0,0 +1 @@
+rsource "lib/Kconfig"

software/apps/hello_world/CMakeLists.txt

@@ -1,6 +0,0 @@
-cmake_minimum_required(VERSION 3.20)
-
-find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
-project(hello_world)
-
-target_sources(app PRIVATE src/main.c)

software/apps/hello_world/prj.conf

@@ -1,4 +0,0 @@
-
-CONFIG_CONSOLE=y
-CONFIG_LOG=y
-CONFIG_UART_CONSOLE=y

software/apps/hello_world/src/main.c

@@ -1,9 +0,0 @@
-#include <zephyr/kernel.h>
-#include <zephyr/sys/printk.h>
-
-int main(void)
-{
-	printk("Hello World! %s\n", CONFIG_BOARD);
-	return 0;
-}
-

software/apps/slave_node/CMakeLists.txt

@@ -1,27 +1,8 @@
 cmake_minimum_required(VERSION 3.20)
 
-# Point BOARD_ROOT and DTS_ROOT to the 'software' directory, which contains 'boards'.
-list(APPEND BOARD_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/../..)
-
 find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
-project(slave_node)
 
-list(APPEND KCONFIG_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/../../modules/modbus_server/Kconfig)
-list(APPEND KCONFIG_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/../../modules/valve/Kconfig)
-list(APPEND KCONFIG_SOURCE ${CMAKE_CURRENT_SOURCE_DIR}/../../modules/fwu/Kconfig)
-
-target_include_directories(app PRIVATE
-    ${CMAKE_CURRENT_SOURCE_DIR}/../../modules/valve/include
-    ${CMAKE_CURRENT_SOURCE_DIR}/../../modules/modbus_server/include
-    ${CMAKE_CURRENT_SOURCE_DIR}/../../modules/fwu/include
-)
-
-# Add the source files from the app and the libraries
-target_sources(app PRIVATE
-    src/main.c
-    src/shell_modbus.c
-    src/shell_system.c
-    ${CMAKE_CURRENT_SOURCE_DIR}/../../modules/valve/src/valve.c
-    ${CMAKE_CURRENT_SOURCE_DIR}/../../modules/modbus_server/src/modbus_server.c
-    ${CMAKE_CURRENT_SOURCE_DIR}/../../modules/fwu/src/fwu.c
-)
+project(slave_node LANGUAGES C)
+zephyr_include_directories(../../include)
+add_subdirectory(../../lib lib)
+target_sources(app PRIVATE src/main.c)

software/apps/slave_node/Kconfig

@@ -0,0 +1,2 @@
+rsource "../../lib/Kconfig"
+source "Kconfig.zephyr"

software/apps/slave_node/boards/bluepill_f103rb.conf

@@ -4,3 +4,4 @@ CONFIG_UART_CONSOLE=n
 # Enable RTT console
 CONFIG_RTT_CONSOLE=y
 CONFIG_USE_SEGGER_RTT=y
+CONFIG_SHELL_BACKEND_RTT=y

software/apps/slave_node/boards/weact_stm32g431_core.overlay

@@ -1,9 +1,50 @@
+/ {
+    vnd7050aj: vnd7050aj {
+        compatible = "vnd7050aj-valve-controller";
+        status = "okay";
+        
+        // VND7050AJ GPIO pin definitions
+        in0-gpios = <&gpiob 7 GPIO_ACTIVE_HIGH>; // IN0 (PB7) - Input 0 control signal
+        in1-gpios = <&gpiob 9 GPIO_ACTIVE_HIGH>; // IN1 (PB9) - Input 1 control signal
+        rst-gpios = <&gpiob 3 GPIO_ACTIVE_HIGH>; // RST (PB3) - Reset pin for VND7050AJ
+        sen-gpios = <&gpiob 4 GPIO_ACTIVE_HIGH>; // SEN (PB4) - Sense Enable for current monitoring
+        s0-gpios = <&gpiob 6 GPIO_ACTIVE_HIGH>;  // S0 (PB6) - Status/Select 0 output from VND7050AJ
+        s1-gpios = <&gpiob 5 GPIO_ACTIVE_HIGH>;  // S1 (PB5) - Status/Select 1 output from VND7050AJ
+    };
+};
+
 &usart1 {
 	modbus0 {
 		compatible = "zephyr,modbus-serial";
 		status = "okay";
 	};
 	status = "okay";
-    pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>;
+    pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>; // PA9=TX, PA10=RX for Modbus communication
     pinctrl-names = "default";
 };
+
+&adc1 { // ADC1 wird für PA0 verwendet
+    status = "okay"; // ADC1 aktivieren
+    pinctrl-0 = <&adc1_in1_pa0>; // Pinmux für PA0 als ADC1_IN1
+    pinctrl-names = "default";
+    st,adc-clock-source = "SYNC";
+    st,adc-prescaler = <4>;
+    #address-cells = <1>;
+    #size-cells = <0>;
+
+    // Definition des ADC-Kanals für MULTISENSE (PA0)
+    channel@1 { // ADC1_IN1 ist Kanal 1
+        reg = <1>; // Kanalnummer
+        zephyr,gain = "ADC_GAIN_1";
+        zephyr,reference = "ADC_REF_INTERNAL";
+        zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
+        zephyr,resolution = <12>;
+    };
+};
+
+&pinctrl {
+    // Pinmux für PA0 als ADC1_IN1 (Analogmodus)
+    adc1_in1_pa0: adc1_in1_pa0 {
+        pinmux = <STM32_PINMUX('A', 0, ANALOG)>; // PA0 in den Analogmodus setzen
+    };
+};

software/apps/slave_node/cdc-acm.overlay

@@ -0,0 +1,14 @@
+&zephyr_udc0 {
+	cdc_acm_uart0: cdc_acm_uart0 {
+		compatible = "zephyr,cdc-acm-uart";
+
+		modbus0 {
+			compatible = "zephyr,modbus-serial";
+			status = "okay";
+		};
+	};
+};
+
+&usart1 {
+	/delete-node/ modbus0;
+};

software/apps/slave_node/overlay-cdc-acm.conf

@@ -0,0 +1,4 @@
+CONFIG_USB_DEVICE_STACK=y
+CONFIG_USB_DEVICE_PRODUCT="Modbus slave node"
+CONFIG_UART_LINE_CTRL=y
+CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=n

software/apps/slave_node/prj.conf

@@ -4,7 +4,6 @@ CONFIG_LOG=y
 
 # Enable Shell
 CONFIG_SHELL=y
-CONFIG_SHELL_BACKEND_RTT=y
 CONFIG_REBOOT=y
 
 # Enable Settings Subsystem

software/apps/slave_node/src/main.c

@@ -1,9 +1,9 @@
 #include <zephyr/kernel.h>
 #include <zephyr/settings/settings.h>
 #include <zephyr/logging/log.h>
-#include <modbus_server.h>
-#include <valve.h>
-#include <fwu.h>
+#include <lib/modbus_server.h>
+#include <lib/valve.h>
+#include <lib/fwu.h>
 
 LOG_MODULE_REGISTER(main, LOG_LEVEL_INF);
 

software/apps/stm32g431_tests/CMakeLists.txt

@@ -1,6 +0,0 @@
-cmake_minimum_required(VERSION 3.20)
-
-find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
-project(stm32g431_tests)
-
-target_sources(app PRIVATE src/main.c)

software/apps/stm32g431_tests/prj.conf

@@ -1,4 +0,0 @@
-
-CONFIG_CONSOLE=y
-CONFIG_LOG=y
-CONFIG_UART_CONSOLE=y

software/apps/stm32g431_tests/src/main.c

@@ -1,9 +0,0 @@
-#include <zephyr/kernel.h>
-#include <zephyr/sys/printk.h>
-
-int main(void)
-{
-	printk("Hello World! %s\n", CONFIG_BOARD);
-	return 0;
-}
-

software/include/lib/modbus_server.h

@@ -0,0 +1,54 @@
+#ifndef MODBUS_SERVER_H
+#define MODBUS_SERVER_H
+
+#include <stdint.h>
+
+/**
+ * @brief Modbus Input Register Addresses.
+ */
+enum
+{
+	/* Valve Control & Status */
+	REG_INPUT_VALVE_STATE_MOVEMENT = 0x0000,
+	REG_INPUT_MOTOR_CURRENT_MA = 0x0001,
+	/* Digital Inputs */
+	REG_INPUT_DIGITAL_INPUTS_STATE = 0x0020,
+	REG_INPUT_BUTTON_EVENTS = 0x0021,
+	/* System Config & Status */
+	REG_INPUT_FIRMWARE_VERSION_MAJOR_MINOR = 0x00F0,
+	REG_INPUT_FIRMWARE_VERSION_PATCH = 0x00F1,
+	REG_INPUT_DEVICE_STATUS = 0x00F2,
+	REG_INPUT_UPTIME_SECONDS_LOW = 0x00F3,
+	REG_INPUT_UPTIME_SECONDS_HIGH = 0x00F4,
+	REG_INPUT_SUPPLY_VOLTAGE_MV = 0x00F5,
+	REG_INPUT_FWU_LAST_CHUNK_CRC = 0x0100
+};
+
+/**
+ * @brief Modbus Holding Register Addresses.
+ */
+enum
+{
+	/* Valve Control */
+	REG_HOLDING_VALVE_COMMAND = 0x0000,
+	REG_HOLDING_MAX_OPENING_TIME_S = 0x0001,
+	REG_HOLDING_MAX_CLOSING_TIME_S = 0x0002,
+	/* Digital Outputs */
+	REG_HOLDING_DIGITAL_OUTPUTS_STATE = 0x0010,
+	/* System Config */
+	REG_HOLDING_WATCHDOG_TIMEOUT_S = 0x00F0,
+	REG_HOLDING_DEVICE_RESET = 0x00F1,
+	/* Firmware Update */
+	REG_HOLDING_FWU_COMMAND = 0x0100,
+	REG_HOLDING_FWU_CHUNK_OFFSET_LOW = 0x0101,
+	REG_HOLDING_FWU_CHUNK_OFFSET_HIGH = 0x0102,
+	REG_HOLDING_FWU_CHUNK_SIZE = 0x0103,
+	REG_HOLDING_FWU_DATA_BUFFER = 0x0180,
+};
+
+int modbus_server_init(void);
+int modbus_reconfigure(uint32_t baudrate, uint8_t unit_id);
+uint32_t modbus_get_baudrate(void);
+uint8_t modbus_get_unit_id(void);
+
+#endif // MODBUS_SERVER_H

software/include/lib/valve.h

@@ -2,8 +2,21 @@
 #define VALVE_H
 
 #include <stdint.h>
+#include <zephyr/drivers/gpio.h>
 
-enum valve_state { VALVE_STATE_CLOSED, VALVE_STATE_OPEN };
+struct valve_gpios {
+    const struct gpio_dt_spec in0;
+    const struct gpio_dt_spec in1;
+    const struct gpio_dt_spec rst;
+    const struct gpio_dt_spec sen;
+    const struct gpio_dt_spec s0;
+    const struct gpio_dt_spec s1;
+};
+
+enum valve_state {
+    VALVE_STATE_CLOSED,
+    VALVE_STATE_OPEN,
+};
 enum valve_movement { VALVE_MOVEMENT_IDLE, VALVE_MOVEMENT_OPENING, VALVE_MOVEMENT_CLOSING, VALVE_MOVEMENT_ERROR };
 
 void valve_init(void);

software/lib/CMakeLists.txt

@@ -0,0 +1,5 @@
+add_subdirectory_ifdef(CONFIG_LIB_FWU fwu)
+add_subdirectory_ifdef(CONFIG_LIB_MODBUS_SERVER modbus_server)
+add_subdirectory_ifdef(CONFIG_LIB_VALVE valve)
+add_subdirectory_ifdef(CONFIG_SHELL_SYSTEM shell_system)
+add_subdirectory_ifdef(CONFIG_SHELL_MODBUS shell_modbus)

software/lib/Kconfig

@@ -0,0 +1,8 @@
+menu "Irrigation system software libraries"
+
+rsource "fwu/Kconfig"
+rsource "modbus_server/Kconfig"
+rsource "valve/Kconfig"
+rsource "shell_system/Kconfig"
+rsource "shell_modbus/Kconfig"
+endmenu

software/lib/fwu/CMakeLists.txt

@@ -0,0 +1 @@
+zephyr_library_sources(fwu.c)

software/lib/fwu/Kconfig

@@ -1,5 +1,5 @@
-config FWU
+config LIB_FWU
     bool "Enable Firmware Update Library"
     default y
     help
-      Enable the Firmware Update module.
+      Enable the Firmware Update Library.

software/lib/fwu/fwu.c

@@ -1,8 +1,8 @@
-#include "fwu.h"
 #include <zephyr/kernel.h>
 #include <zephyr/sys/crc.h>
 #include <zephyr/sys/byteorder.h>
 #include <zephyr/logging/log.h>
+#include <lib/fwu.h>
 
 LOG_MODULE_REGISTER(fwu, LOG_LEVEL_INF);
 

software/lib/modbus_server/CMakeLists.txt

@@ -0,0 +1 @@
+zephyr_library_sources(modbus_server.c)

software/lib/modbus_server/Kconfig

@@ -0,0 +1,5 @@
+config LIB_MODBUS_SERVER
+    bool "Enable Modbus Server Library"
+    default y
+    help
+      Enable the Modbus Server Library.

software/lib/modbus_server/modbus_server.c

@@ -5,9 +5,9 @@
 #include <zephyr/logging/log.h>
 #include <zephyr/settings/settings.h>
 #include <zephyr/sys/reboot.h>
-#include "modbus_server.h"
-#include "valve.h"
-#include "fwu.h"
+#include <lib/modbus_server.h>
+#include <lib/valve.h>
+#include <lib/fwu.h>
 
 #include <zephyr/usb/usb_device.h>
 
@@ -128,6 +128,9 @@ static int input_reg_rd(uint16_t addr, uint16_t *reg)
 	case REG_INPUT_UPTIME_SECONDS_HIGH:
 		*reg = (uint16_t)(uptime_s >> 16);
 		break;
+	case REG_INPUT_SUPPLY_VOLTAGE_MV:
+		*reg = 12300;
+		break;
 	case REG_INPUT_FWU_LAST_CHUNK_CRC:
 		*reg = fwu_get_last_chunk_crc();
 		break;
@@ -135,7 +138,7 @@ static int input_reg_rd(uint16_t addr, uint16_t *reg)
 		*reg = (0 << 8) | 0;
 		break;
 	case REG_INPUT_FIRMWARE_VERSION_PATCH:
-		*reg = 1;
+		*reg = 2;
 		break;
 	default:
 		*reg = 0;
@@ -155,6 +158,17 @@ static struct modbus_user_callbacks mbs_cbs = {
 int modbus_server_init(void)
 {
 	k_timer_init(&watchdog_timer, watchdog_timer_handler, NULL);
+	
+	// Load saved settings
+	uint32_t saved_baudrate = 19200;
+	uint8_t saved_unit_id = 1;
+	settings_load_one("modbus/baudrate", &saved_baudrate, sizeof(saved_baudrate));
+	settings_load_one("modbus/unit_id", &saved_unit_id, sizeof(saved_unit_id));
+	
+	// Apply loaded settings
+	server_param.serial.baud = saved_baudrate;
+	server_param.server.unit_id = saved_unit_id;
+	
 	const char iface_name[] = {DEVICE_DT_NAME(MODBUS_NODE)};
 #if DT_NODE_HAS_COMPAT(DT_PARENT(MODBUS_NODE), zephyr_cdc_acm_uart)
 	const struct device *const dev = DEVICE_DT_GET(DT_PARENT(MODBUS_NODE));
@@ -179,20 +193,37 @@ int modbus_server_init(void)
 		return modbus_iface;
 	}
 	server_param.server.user_cb = &mbs_cbs;
+	
+	LOG_INF("Starting Modbus server: baudrate=%u, unit_id=%u", saved_baudrate, saved_unit_id);
 	return modbus_init_server(modbus_iface, server_param);
 }
 
 int modbus_reconfigure(uint32_t baudrate, uint8_t unit_id)
 {
+	// Update parameters
 	server_param.serial.baud = baudrate;
 	server_param.server.unit_id = unit_id;
 
+	// Try to reinitialize - this should work for most cases
 	int ret = modbus_init_server(modbus_iface, server_param);
 
 	if (ret == 0)
 	{
 		settings_save_one("modbus/baudrate", &baudrate, sizeof(baudrate));
 		settings_save_one("modbus/unit_id", &unit_id, sizeof(unit_id));
+		LOG_INF("Modbus reconfigured: baudrate=%u, unit_id=%u", baudrate, unit_id);
+	}
+	else
+	{
+		LOG_ERR("Failed to reconfigure Modbus: %d", ret);
+		LOG_INF("Modbus reconfiguration requires restart to take effect");
+		
+		// Save settings for next boot
+		settings_save_one("modbus/baudrate", &baudrate, sizeof(baudrate));
+		settings_save_one("modbus/unit_id", &unit_id, sizeof(unit_id));
+		
+		LOG_INF("Settings saved. Type 'reset' to restart the device and apply the change.");
+		return 0; // Return success since settings are saved
 	}
 
 	return ret;

software/lib/shell_modbus/CMakeLists.txt

@@ -0,0 +1 @@
+zephyr_library_sources(shell_modbus.c)

software/lib/shell_modbus/Kconfig

@@ -0,0 +1,5 @@
+config SHELL_MODBUS
+    bool "Enable Shell Modbus"
+    default y
+    help
+      Enable the modnbus shell commands.

software/lib/shell_modbus/shell_modbus.c

@@ -1,7 +1,7 @@
 #include <zephyr/shell/shell.h>
 #include <stdlib.h>
-#include <modbus_server.h>
-#include <valve.h>
+#include <lib/modbus_server.h>
+#include <lib/valve.h>
 
 static int cmd_modbus_set_baud(const struct shell *sh, size_t argc, char **argv)
 {

software/lib/shell_system/CMakeLists.txt

@@ -0,0 +1 @@
+zephyr_library_sources(shell_system.c)

software/lib/shell_system/Kconfig

@@ -0,0 +1,5 @@
+config SHELL_SYSTEM
+    bool "Enable Shell System"
+    default y
+    help
+      Enable the system commands.

software/lib/valve/CMakeLists.txt

@@ -0,0 +1 @@
+zephyr_library_sources(valve.c)

software/lib/valve/Kconfig

@@ -1,5 +1,5 @@
-config VALVE
+config LIB_VALVE
     bool "Enable Valve Library"
     default y
     help
-      Enable the Valve module.
+      Enable the Valve Library.

software/lib/valve/valve.c

@@ -1,10 +1,21 @@
-#include "valve.h"
 #include <zephyr/kernel.h>
 #include <zephyr/settings/settings.h>
 #include <zephyr/logging/log.h>
+#include <zephyr/device.h>
+#include <zephyr/drivers/gpio.h>
+#include <lib/valve.h>
 
 LOG_MODULE_REGISTER(valve, LOG_LEVEL_INF);
 
+static const struct valve_gpios valve_gpios = {
+    .in0 = GPIO_DT_SPEC_GET(DT_NODELABEL(vnd7050aj), in0_gpios),
+    .in1 = GPIO_DT_SPEC_GET(DT_NODELABEL(vnd7050aj), in1_gpios),
+    .rst = GPIO_DT_SPEC_GET(DT_NODELABEL(vnd7050aj), rst_gpios),
+    .sen = GPIO_DT_SPEC_GET(DT_NODELABEL(vnd7050aj), sen_gpios),
+    .s0 = GPIO_DT_SPEC_GET(DT_NODELABEL(vnd7050aj), s0_gpios),
+    .s1 = GPIO_DT_SPEC_GET(DT_NODELABEL(vnd7050aj), s1_gpios),
+};
+
 static enum valve_state current_state = VALVE_STATE_CLOSED;
 static enum valve_movement current_movement = VALVE_MOVEMENT_IDLE;
 static uint16_t max_opening_time_s = 60;
@@ -13,11 +24,15 @@ static struct k_work_delayable valve_work;
 
 static void valve_work_handler(struct k_work *work)
 {
+    gpio_pin_set_dt(&valve_gpios.in0, 0);
+    gpio_pin_set_dt(&valve_gpios.in1, 0);
+    gpio_pin_set_dt(&valve_gpios.rst, 0);
+
     if (current_movement == VALVE_MOVEMENT_OPENING) {
-        LOG_INF("Virtual valve finished opening");
+        LOG_INF("Valve finished opening");
     } else if (current_movement == VALVE_MOVEMENT_CLOSING) {
         current_state = VALVE_STATE_CLOSED;
-        LOG_INF("Virtual valve finished closing");
+        LOG_INF("Valve finished closing");
     }
     current_movement = VALVE_MOVEMENT_IDLE;
 }
@@ -27,22 +42,35 @@ void valve_init(void)
     k_work_init_delayable(&valve_work, valve_work_handler);
     settings_load_one("valve/max_open_time", &max_opening_time_s, sizeof(max_opening_time_s));
     settings_load_one("valve/max_close_time", &max_closing_time_s, sizeof(max_closing_time_s));
+
+    gpio_pin_configure_dt(&valve_gpios.in0, GPIO_OUTPUT_INACTIVE);
+    gpio_pin_configure_dt(&valve_gpios.in1, GPIO_OUTPUT_INACTIVE);
+    gpio_pin_configure_dt(&valve_gpios.rst, GPIO_OUTPUT_INACTIVE);
+    gpio_pin_configure_dt(&valve_gpios.sen, GPIO_OUTPUT_INACTIVE);
+    gpio_pin_configure_dt(&valve_gpios.s0, GPIO_OUTPUT_INACTIVE);
+    gpio_pin_configure_dt(&valve_gpios.s1, GPIO_OUTPUT_INACTIVE);
 }
 
 void valve_open(void)
 {
     if (current_state == VALVE_STATE_CLOSED) {
+        gpio_pin_set_dt(&valve_gpios.rst, 1);
+        gpio_pin_set_dt(&valve_gpios.in1, 0);
+        gpio_pin_set_dt(&valve_gpios.in0, 1);
         current_state = VALVE_STATE_OPEN;
         current_movement = VALVE_MOVEMENT_OPENING;
-        k_work_schedule(&valve_work, K_SECONDS(max_opening_time_s));
+        k_work_schedule(&valve_work, K_MSEC(max_opening_time_s * 1000 * 0.9));
     }
 }
 
 void valve_close(void)
 {
     if (current_state == VALVE_STATE_OPEN) {
+        gpio_pin_set_dt(&valve_gpios.rst, 1);
+        gpio_pin_set_dt(&valve_gpios.in0, 0);
+        gpio_pin_set_dt(&valve_gpios.in1, 1);
         current_movement = VALVE_MOVEMENT_CLOSING;
-        k_work_schedule(&valve_work, K_SECONDS(max_closing_time_s));
+        k_work_schedule(&valve_work, K_MSEC(max_closing_time_s * 1000 * 0.9));
     }
 }
 

software/modules/fwu/CMakeLists.txt

@@ -1,7 +0,0 @@
-cmake_minimum_required(VERSION 3.13.1)
-include($ENV{ZEPHYR_BASE}/cmake/app/boilerplate.cmake NO_POLICY_SCOPE)
-
-project(fwu)
-
-target_sources(app PRIVATE src/fwu.c)
-target_include_directories(app PUBLIC include)

software/modules/modbus_server/CMakeLists.txt

@@ -1,7 +0,0 @@
-cmake_minimum_required(VERSION 3.13.1)
-include($ENV{ZEPHYR_BASE}/cmake/app/boilerplate.cmake NO_POLICY_SCOPE)
-
-project(modbus_server)
-
-target_sources(app PRIVATE src/modbus_server.c)
-target_include_directories(app PUBLIC include)

software/modules/modbus_server/Kconfig

@@ -1,5 +0,0 @@
-config MODBUS_SERVER
-    bool "Enable Modbus Server Library"
-    default y
-    help
-      Enable the Modbus Server module.

software/modules/modbus_server/include/modbus_server.h

@@ -1,52 +0,0 @@
-#ifndef MODBUS_SERVER_H
-#define MODBUS_SERVER_H
-
-#include <stdint.h>
-
-/**
- * @brief Modbus Input Register Addresses.
- */
-enum {
-	/* Valve Control & Status */
-	REG_INPUT_VALVE_STATE_MOVEMENT        = 0x0000,
-	REG_INPUT_MOTOR_CURRENT_MA            = 0x0001,
-	/* Digital Inputs */
-	REG_INPUT_DIGITAL_INPUTS_STATE        = 0x0020,
-	REG_INPUT_BUTTON_EVENTS               = 0x0021,
-	/* System Config & Status */
-	REG_INPUT_FIRMWARE_VERSION_MAJOR_MINOR = 0x00F0,
-	REG_INPUT_FIRMWARE_VERSION_PATCH      = 0x00F1,
-	REG_INPUT_DEVICE_STATUS               = 0x00F2,
-	REG_INPUT_UPTIME_SECONDS_LOW          = 0x00F3,
-	REG_INPUT_UPTIME_SECONDS_HIGH         = 0x00F4,
-	/* Firmware Update */
-	REG_INPUT_FWU_LAST_CHUNK_CRC          = 0x0100,
-};
-
-/**
- * @brief Modbus Holding Register Addresses.
- */
-enum {
-	/* Valve Control */
-	REG_HOLDING_VALVE_COMMAND             = 0x0000,
-	REG_HOLDING_MAX_OPENING_TIME_S        = 0x0001,
-	REG_HOLDING_MAX_CLOSING_TIME_S        = 0x0002,
-	/* Digital Outputs */
-	REG_HOLDING_DIGITAL_OUTPUTS_STATE     = 0x0010,
-	/* System Config */
-	REG_HOLDING_WATCHDOG_TIMEOUT_S        = 0x00F0,
-	REG_HOLDING_DEVICE_RESET              = 0x00F1,
-	/* Firmware Update */
-	REG_HOLDING_FWU_COMMAND               = 0x0100,
-	REG_HOLDING_FWU_CHUNK_OFFSET_LOW      = 0x0101,
-	REG_HOLDING_FWU_CHUNK_OFFSET_HIGH     = 0x0102,
-	REG_HOLDING_FWU_CHUNK_SIZE            = 0x0103,
-	REG_HOLDING_FWU_DATA_BUFFER           = 0x0180,
-};
-
-int modbus_server_init(void);
-int modbus_reconfigure(uint32_t baudrate, uint8_t unit_id);
-uint32_t modbus_get_baudrate(void);
-uint8_t modbus_get_unit_id(void);
-
-#endif // MODBUS_SERVER_H

software/modules/valve/CMakeLists.txt

@@ -1,7 +0,0 @@
-cmake_minimum_required(VERSION 3.13.1)
-include($ENV{ZEPHYR_BASE}/cmake/app/boilerplate.cmake NO_POLICY_SCOPE)
-
-project(valve)
-
-target_sources(app PRIVATE src/valve.c)
-target_include_directories(app PUBLIC include)

software/tools/modbus_tool/modbus_tool.py

@@ -19,6 +19,7 @@ REG_INPUT_FIRMWARE_VERSION_PATCH = 0x00F1
 REG_INPUT_DEVICE_STATUS = 0x00F2
 REG_INPUT_UPTIME_SECONDS_LOW = 0x00F3
 REG_INPUT_UPTIME_SECONDS_HIGH = 0x00F4
+REG_INPUT_SUPPLY_VOLTAGE_MV = 0x00F5
 REG_INPUT_FWU_LAST_CHUNK_CRC = 0x0100
 REG_HOLDING_VALVE_COMMAND = 0x0000
 REG_HOLDING_MAX_OPENING_TIME_S = 0x0001
@@ -84,7 +85,7 @@ def poll_status(slave_id, interval):
             # If connected, try to read data
             ir_valve = client.read_input_registers(REG_INPUT_VALVE_STATE_MOVEMENT, count=2, slave=slave_id)
             ir_dig = client.read_input_registers(REG_INPUT_DIGITAL_INPUTS_STATE, count=2, slave=slave_id)
-            ir_sys = client.read_input_registers(REG_INPUT_FIRMWARE_VERSION_MAJOR_MINOR, count=5, slave=slave_id)
+            ir_sys = client.read_input_registers(REG_INPUT_FIRMWARE_VERSION_MAJOR_MINOR, count=6, slave=slave_id)
             hr_valve = client.read_holding_registers(REG_HOLDING_MAX_OPENING_TIME_S, count=2, slave=slave_id)
             hr_dig = client.read_holding_registers(REG_HOLDING_DIGITAL_OUTPUTS_STATE, count=1, slave=slave_id)
             hr_sys = client.read_holding_registers(REG_HOLDING_WATCHDOG_TIMEOUT_S, count=1, slave=slave_id)
@@ -109,9 +110,11 @@ def poll_status(slave_id, interval):
             fw_minor = ir_sys.registers[0] & 0xFF
             fw_patch = ir_sys.registers[1]
             uptime_seconds = (ir_sys.registers[4] << 16) | ir_sys.registers[3]
+            supply_voltage_mv = ir_sys.registers[5]
             new_data["firmware"] = f"v{fw_major}.{fw_minor}.{fw_patch}"
             new_data["device_status"] = "OK" if ir_sys.registers[2] == 0 else "ERROR"
             new_data["uptime"] = format_uptime(uptime_seconds)
+            new_data["supply_voltage"] = f"{supply_voltage_mv / 1000.0:.2f} V"
             new_data["watchdog"] = f"{hr_sys.registers[0]}s"
             new_data["error"] = None # Clear any previous error on successful read
             reconnect_attempts = 0 # Reset attempts on successful communication
@@ -302,6 +305,7 @@ def main_menu(stdscr, slave_id):
                 stdscr.addstr(1, col4, "Firmware:", bold); stdscr.addstr(1, col4 + 14, str(current_data.get('firmware', 'N/A')), normal)
                 stdscr.addstr(2, col4, "Uptime:", bold); stdscr.addstr(2, col4 + 14, str(current_data.get('uptime', 'N/A')), normal)
                 stdscr.addstr(3, col4, "Dev. Status:", bold); stdscr.addstr(3, col4 + 14, str(current_data.get('device_status', 'N/A')), normal)
+                stdscr.addstr(4, col4, "Supply V:", bold); stdscr.addstr(4, col4 + 14, str(current_data.get('supply_voltage', 'N/A')), normal)
             stdscr.addstr(5, 0, "─" * (w - 1), normal)
             for idx, row in enumerate(menu):
                 draw_button(stdscr, h // 2 - len(menu) + (idx * 2), w // 2 - len(row) // 2, row, idx == current_row_idx)