Go to file

Eduard Iten 6c15b7021f refactor(slave_node): Clean up initial configuration

- Remove redundant DTS_ROOT from CMakeLists.txt as it's inferred from BOARD_ROOT.
- Clear the project configuration (prj.conf) to start with a minimal baseline.

2025-07-01 12:09:36 +02:00

docs

feat(docs): Mark task 1.1 as done

2025-06-30 18:46:04 +02:00

hardware

Hardware updated

2025-06-30 13:52:33 +02:00

software

refactor(slave_node): Clean up initial configuration

2025-07-01 12:09:36 +02:00

.gitignore

added gitignore to ignore build dirs

2025-06-13 07:48:18 +02:00

README.de.md

feat(i18n): Add French and Spanish translations

2025-06-30 18:10:51 +02:00

README.es.md

feat(i18n): Add French and Spanish translations

2025-06-30 18:10:51 +02:00

README.fr.md

feat(i18n): Add French and Spanish translations

2025-06-30 18:10:51 +02:00

README.md

feat(i18n): Add French and Spanish translations

2025-06-30 18:10:51 +02:00

README.md

🇩🇪 Deutsch | 🇬🇧 English | 🇫🇷 Français | 🇪🇸 Español

Modular Irrigation System

This project implements a smart, modular irrigation system controlled via Home Assistant.

Documentation

The detailed documentation can be found in the docs/ directory:

Concept: Describes the system architecture, the components used, and the basic design decisions.
MODBUS Registers: Defines the register map for communication with the slave nodes.
Project Plan: Contains the development and implementation plan.

Quick Start

Hardware: The KiCad files for the hardware are located in the hardware/ directory.
Software: The Zephyr-based firmware for the slave nodes is located in the software/ directory.