Go to file

Eduard Iten b005fd5c11 feat(slave_node): Enable UART console and printk

- Enable the console subsystem and printk for debugging output.
- Configure the console to use the UART peripheral (usart1 on PA9/PA10).
- Disable RTT to ensure UART is the active console.

2025-07-01 12:13:59 +02:00

docs

feat(docs): Mark task 1.1 as done

2025-06-30 18:46:04 +02:00

hardware

Hardware updated

2025-06-30 13:52:33 +02:00

software

feat(slave_node): Enable UART console and printk

2025-07-01 12:13:59 +02:00

.gitignore

added gitignore to ignore build dirs

2025-06-13 07:48:18 +02:00

README.de.md

feat(i18n): Add French and Spanish translations

2025-06-30 18:10:51 +02:00

README.es.md

feat(i18n): Add French and Spanish translations

2025-06-30 18:10:51 +02:00

README.fr.md

feat(i18n): Add French and Spanish translations

2025-06-30 18:10:51 +02:00

README.md

feat(i18n): Add French and Spanish translations

2025-06-30 18:10:51 +02:00

README.md

🇩🇪 Deutsch | 🇬🇧 English | 🇫🇷 Français | 🇪🇸 Español

Modular Irrigation System

This project implements a smart, modular irrigation system controlled via Home Assistant.

Documentation

The detailed documentation can be found in the docs/ directory:

Concept: Describes the system architecture, the components used, and the basic design decisions.
MODBUS Registers: Defines the register map for communication with the slave nodes.
Project Plan: Contains the development and implementation plan.

Quick Start

Hardware: The KiCad files for the hardware are located in the hardware/ directory.
Software: The Zephyr-based firmware for the slave nodes is located in the software/ directory.